Since the introduction of _KCONFIG_DEFCONFIG in 8ef62b99, the package's
.config file no longer depends on anything (unless a fragment is
defined). Therefore, there is no dependency anymore between .config
and <pkg>-patch. Thus, it is possible that the .config file is
attempted to be built before the package is extracted and patched.
Usually this works out OK because <pkg>-patch will always be done
before <pkg>-configure, but it will fail when the user calls
<pkg>-menuconfig explicitly. It will also fail when we enable
top-level parallel build.
To solve this, just add an explicit order-only dependency on
<pkg>-patch. It really is only necessary when _KCONFIG_DEFCONFIG is
defined and _KCONFIG_FRAGMENT_FILES is not, but it doesn't hurt to
add it unconditionally.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reported-by: FrAnKenStEiN MC <chfakht@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_ARCH_HAS_ATOMICS was added because on ARC, atomic instructions
may not be provided by the architecture and therefore the compiler
does not provide the __sync_*() built-ins.
However, since then, icu was changed and is now able to use C++11
atomics, or even no atomic operations at all. In fact, icu will:
* If possible, it will use C++11 atomics, which internally rely on
the __atomic built-ins. These are available since gcc 4.7, and all
architectures provide it. On some architectures, you *must* link
with libatomic, on some other architectures, they are available
built-in, but in all cases, linking against libatomic does not
harm. Thanks to this, even ARC with no atomic support (which was
the original reason for adding the BR2_ARCH_HAS_ATOMICS) dependency
builds fine, provided -latomic is added to LIBS.
* If C++11 atomics are not available, then it falls back to
__sync_*() built-ins, which allows compilers older than 4.7 to be
supported.
* If really no atomic mechanism is available, then it falls back to a
basic implementation based on a mutex.
Conclusion:
- The BR2_ARCH_HAS_ATOMICS dependency is no longer needed.
- We need to link with -latomic when gcc >= 4.7 is used.
Note that reverse dependencies of icu are also changed accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit 669ce8c75e ("libftdi: add
dependency on atomic operations"), a dependency on
BR2_ARCH_HAS_ATOMICS was added to the libftdi package to fix a build
failure occuring on the ARC architecture due to the missing
__sync_fetch_and_add_4 function:
../ftdipp/.libs/libftdipp.so: undefined reference to `__sync_fetch_and_add_4'
However, today, even on the SPARC architecture that does not implement
any of the __sync built-ins, libftdi and its C++ binding libftdipp
build fine. ARC was also tested and builds fine.
Therefore, we remove the BR2_ARCH_HAS_ATOMICS dependency from libftdi,
and also from flashrom, in which it was only present due to the
selection of libftdi. Note that anyway flashrom is available only for
i386 and x86_64, both of which implement all the __sync built-ins.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
According to libftdi configure.in:
"""
dnl libftdi C++ wrapper. Needs boost.
[...]
if test "x$HAVE_BOOST" != "xyes"; then
AC_MSG_ERROR(Sorry, we need the boost library for the C++ wrapper)
fi
"""
And indeed, if you enable BR2_PACKAGE_LIBTFDI_CPP but don't have Boost
enabled, the libfdipp library is not built. To fix this, this commit
changes BR2_PACKAGE_LIBTFDI_CPP to select Boost.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Compile error occured using an allyesconfig, it seems it has not been
caught by the autobuilders yet.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit d1d735a148 disables the tests
tirpc_auth_authdes_seccreate
but not those in
tirpc_auth_authdes_create
while these also fail on targets without native RPC support.
Update the added patch to exclude those tests too.
Fixes:
http://autobuild.buildroot.net/results/3a2/3a2b141d90b28a2954fa0ad3104cba81d648d2a3/
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Well-formed patch fails to apply
- patch v2.6:
Hunk #1 FAILED at 1.
Hunk #2 FAILED at 23.
- patch v2.6.1:
can't find file to patch at input line 11
Perhaps you used the wrong -p or --strip option?
[snip]
No file to patch. Skipping patch.
2 out of 2 hunks ignored
Patch failed! Please fix 0001-fix-makefile.patch!
Old versions of the tool "patch" cannot handle spaces in filenames.
The same does not occur using "patch" v2.7 or any later.
Workaround: when a file with space in the name needs to be patched,
one or two hooks must be used.
A pre-patch or post-extract hook renames the file to replace spaces
with underscores.
The patch file must be generated using diff between two source-trees
that have the file renamed with spaces replaced by underscores.
A post-patch hook could rename the file to its original name if needed.
Fixes:
http://autobuild.buildroot.net/results/8ff/8ff91ab8e52000eb34dd8f662520cf1b31490cf5/http://autobuild.buildroot.net/results/ea7/ea77d6b23aca0cb1cf527e6c16ddf5eba957a69c/
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The autobuilders did not catch the error yet because they failed
earlier with other packages, but I am continuing the build based
on the defconfig from:
http://autobuild.buildroot.net/results/6cc/6cc0f8c067e07deea688b9b97284601a596b898c/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Default configure options were changed in
ad9b54ad90
enabling the download of the source of libhdhomerun and its static
build which will lead to a link error because the host compiler is used
for that build. Therefore disable the static build of libhdhomerun by
tvheadend's build system like we do for ffmpeg.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The new version of imx-lib no longer bears the EULA file, and has no
other license file.
So, we pick a small header as the license file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gary Bisson <gary.bisson@boundarydevices.com>
Acked-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Old gcc compilers do not support type redefinitions, which causes a
build failure of the host-vboot-utils package on certain machines. The
vboot-utils source code redefines "typedef struct rsa_st RSA" which is
already defined in the OpenSSL headers.
This commit adds a patch which works around this build issue.
Fixes:
http://autobuild.buildroot.org/results/1a4/1a45412939a3f9d6fa59d086d834a3b4a4bffef7/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since vboot-utils is hosted in a Git repository, it makes sense to use
Git formatted patches for this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes https://bugs.busybox.net/show_bug.cgi?id=8621#c1
Lonnie Abelbeck wrote:
"recently sqlite changed it's default behavior wrt the sqlite CLI tool,
previously it was dynamically linked with libsqlite3.so.0 by default,
now it is statically linked by default.
The old behavior can be signaled with: --disable-static-shell"
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently we have no patches for this package, compilation works without
autoreconf.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Place 'depends on' statements before 'select' ones.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
nss uses some #pragma directives that require newish (>= 4.6) versions
of gcc, so disable Werror when building with older versions to avoid the
build from breaking unfairly.
However make this a gcc >= 4.8 conditional since the kludge is called so
(NSS_NO_GCC48) and other bits might depend upon it.
Upstream bug https://bugzilla.mozilla.org/show_bug.cgi?id=1226179
Fixes:
http://autobuild.buildroot.net/results/ebd/ebd0647eb1eef41a7fb6e5f5bab18d4d12168661/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The linknx package needs the argp functionality, which is provided
built-in by glibc, but not by uClibc and musl. In uClibc
configurations, it correctly selects the argp-standalone package to
compensate this, but forgets to do so in musl-based
configurations. This commit fixes that by selecting the
argp-standalone package.
Found by checking all packages having an argp-standalone
dependency. Note that this commit is not sufficient to make linknx
build properly with musl.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The iucode-tool package needs the argp functionality, which is
provided built-in by glibc, but not by uClibc and musl. In uClibc
configurations, it correctly selects the argp-standalone package to
compensate this, but forgets to do so in musl-based
configurations. This commit fixes that by selecting the
argp-standalone package, and adjusting the dependency in the .mk file.
Fixes:
http://autobuild.buildroot.net/results/7f8626db69500a84a393053a485f04180c565673/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a minor patch to hplip's configure.in script, which
avoids the need to create the AUTOHRS, ChangeLog, NEWS and README
files before autoreconfiguring, and silences a huge number of warnings
telling to enable the subdir-objects automake option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 0001-fix-make.patch which was added to the hplip package to remove
hardcoded paths to the libusb header introduced a solution that isn't
correct. When cross-compiling, $(includedir) is ${prefix}/include (i.e
/usr/include), so it is not the location where headers can be
found. Due to this, hplip.mk was overriding the includedir value with
--includedir which is not correct.
To replace this mechanism, this commit changes the patch to instead
use pkg-config (which is already used in other places in hplip
configure.in) to detect libusb. This way, we can get rid of the hack
and get a proper detection of libusb.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Remove 0001-fix-static.patch - Fixed upstream
- Remove 0002-fix-stack-protector-check.patch - Fixed upstream
- Remove 0003-mantohtml.patch - Replaced by
0001-Remove-man-from-BUILDDIRS-in- configure.patch
- Add 0002-Do-not-use-genstrings.patch
- Add CUPS_PDFTOPS option to Config.in.legacy - This support was
moved to the cups-filters package.
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
[Thomas:
- rewrap patch description in patch 0001
- adjust patch 0002 to completely remove the call to genstrings
instead of commenting it, and remove the potentially confusing
'echo' above it
- add a third patch that sanitizes the installation process to avoid
non-working stripping, owernship changes, etc.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The new upstream is a fork of the original that consolidates other distro's
patches. This fork resolves a series of musl build failures noted in the
autobuilder log.
http://autobuild.buildroot.net/results/12cb73f3def95efe706bcd957bc2c091e7931d5a/
- Updated to github fork, selected merge from Nov 3 2015
which provided musl fixes (last release was to old, 20150815)
- Why the fork ? (http://www.spinics.net/lists/netdev/msg279881.html)
- Added missing dependencies for kernel capabilies lib
- Accounted for new consolidated ping (ipv4/6)
Tested against a buildroot arm musl/glibc toolchains, as well as
autobuilder defconfig.
Signed-off-by: Matt Weber <matt@thewebers.ws>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After some effort to upstream the libv4l patches, 4 out of our 5
patches are now upstream. This commit updates those patches to
indicate their upstream status.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the bump of libjpeg to v9b, libv4l doesn't build anymore due to
the change of the prototype of jpeg_mem_src(), which gets
re-implemented in libv4l when the libjpeg is too old.
Fixes:
http://autobuild.buildroot.org/results/e7a/e7a2341cbbcf514f4cd6754a5a36cebd6556a757/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
xlib_libfontenc depends on the zlib package but doesn't select it.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
lldpd is a 802.1ab implementation (LLDP) to help you locate neighbors
of all your equipments.
LLDP is an industry standard protocol designed to supplant proprietary
Link-Layer protocols such as EDP or CDP. The goal of LLDP is to
provide an inter-vendor compatible mechanism to deliver Link-Layer
notifications to adjacent network devices.
https://vincentbernat.github.io/lldpd/
[Thomas:
- add depends on BR2_USE_MMU, since fork() is used
- rewrap Config.in help text]
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-ldl includes the reference to the library that has
the symbols for loading dynamic libraries.
So there is no need for this library for static only builds.
Even though alsa-lib uses dlopen, it has functions snd_dlopen
and others which can emulate dynamic linking for the static
build of the alsa-lib library and there is no need in libdl
dlopen when static build only.
This patch fixes build failures of the shairport-sync
(and probably other packages) when static libs are used.
Fixes:
http://autobuild.buildroot.net/results/85a/85a3f01bcd4eb2ce7ac480e63b4cc04bf7c8f3e5/
[Thomas: use a single ALSA_LIB_CONF_OPTS for both --enable-shared=no
and --without-libdl.]
Signed-off-by: Lada Trimasova <ltrimas@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 7a6b83a211 introduced the skeleton
package, which took over the lib32/lib64 -> lib symlink creation from the
main Makefile.
However, the definition of the LIB_SYMLINK variable did not move along, for
no real reason.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These patches solve several problems that were discovered
after bumping tools to arc-2015.12-rc1.
The fixes were done in development tree arc-4.8-dev and will be
a part of the next release of ARC GNU tools.
Once that new release happens these patches must be removed.
Signed-off-by: Lada Trimasova <ltrimas@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's been deprecated for a year now, so remove it.
While at it also remove the BR2_DEPRECATED_SINCE_2015_02 since it's now
unused.
And change the efl gif text to refer to giflib rather than libungif
which is what's used since it was deprecated.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove for the upcoming 2016.02 release, it's been deprecated for a year
now.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libnspr currently passes --enable-thumb2 if the CPU has thumb
instructions. This option will pass -mthumb to the compiler. However,
if an external multilib toolchain is used that has a thumb-specific
variant (e.g. Sourcery), it will try to use that one. But we only copy
a single variant to the sysroot, so the build will fail with:
.../arm-none-linux-gnueabi/bin/ld: cannot find crti.o: No such file or directory
...
collect2: error: ld returned 1 exit status
../../config/rules.mk:303: recipe for target 'libnspr4.so' failed
We can in fact just remove the thumb2 handling. With current libnspr,
the thumb and thumb2 options just add -marm and -mthumb. But we already
pass that in our toolchain wrapper so it's completely redundant.
Note that when nothing is passed, the configure script still tries to
autodetect whether thumb2 is available (but doesn't do it correctly,
see the error above), but in the end it doesn't use the result for
anything. In other words, even if it detects that thumb2 is available,
it will _not_ pass -mthumb to the compiler.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to latest commit to fix runtime issue with the Linux Kernel headers 4.4:
Starting thd: Unable to parse trigger line: [..]
With version 4.4 of the Linux Kernel the input event codes are not defined in
'linux/input.h' anymore, but in a seperate header file
'linux/input-event-codes.h' leaving triggerhappys evtable_*.h header files
empty with no event codes defined.
This issue is fixed upstream by commit 7e5abc69f215678e93a6b999524981c8b40bdcd9
which also makes overwriting of the 'LINUX_INPUT_H' definition obsolet.
Tested with an internal Buildroot toolchain with Linux Kernel headers 4.4 and
an external Linaro ARM 2015.08 toolchain with Linux Kernel headers 4.0.
[Peter: add hash file]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
... and change the modules 'menuconfig' to a simple 'config'
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop the now useless comment.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Starting with Linux 4.4 headers, mtd-user.h isn't including stdint.h any
more which breaks the build.
Fixes:
http://autobuild.buildroot.net/results/05a/05a159c7f8382237d4c941b1bb6de7dad72708f3/
[Thomas:
- fix minor typo in the patch description
- add reference to the autobuilder failure, as suggested by Baruch.]
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change introduces newer ARC toolchain in Buildroot.
Note this is the first release candidate and we'll probably see another
RC before cutting the final release.
That new arc-2015.12 release doesn't bring any significant changes but
mostly is focused on fixes and minor improvements here and there.
Most noticeable changes are:
* GCC updated to v4.8.5
* GDB updated to 7.10
You may find more info on fixes and improvements in that release at:
https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/tag/arc-2015.12-rc1
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it will cause build failures like this one:
[100%] Linking C executable luvi
/home/buildroot/autobuild/run/instance-2/output/host/opt/ext-toolchain/bin/../lib/gcc/mipsel-buildroot-linux-gnu/5.2.0/../../../../mipsel-buildroot-linux-gnu/bin/ld:
jitted_tmp/src/lua/init.lua_luvi_generated.o: compiled for a big endian
system and target is little endian
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is an empty newline between the "help" keyword, and the help
text, which we don't normally do in Buildroot. This commit gets rid of
this useless empty newline.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Hide all the util-linux options in a menuconfig, as the option
list is quite long.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Recent MIPS compilers have an stricter agreement between the compiler
and the assembler on the ABI. The compiler now passes -msoft-float to
the assembler where it previously did not.
libffi uses MIPS hard-float instructions so when we try to build it for
soft-float using a recent compiler it fails because of the explained
above. This package should be fixed in order to add support for
soft-float.
In the meantime we can add a little hack in order to be able to build it
for soft-float. Basically we add ".set hardfloat" so the assembler will
not disable the hard-float instructions. The build will of course
include some hard-float bits which shouldn't exist in a soft-float
build, and that may cause runtime problems. But that's what we already
had before and we had lived with it.
We choose to apply this temporary fix because it only affects MIPS
soft-float builds. Otherwise we would need to disable libffi and
recursively all the packages depending on it (python, libglib2...) for
MIPS soft-float, which would be a bit overkill.
Fixes:
http://autobuild.buildroot.net/results/6b0607b7cb0ac5525c2e47e819301f38bd2d6b30/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As x264 is packaged, we can also build the gstreamer plugin using it.
This commit adds the option in menuconfig and make sure it is built if
selected.
[Peter: split fix, add GPL tag, update help text and commit description]
Signed-off-by: Vincent Dehors <vincent.dehors@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The wrong variable name was used for the configure options.
Reported-by: Vincent Dehors <vincent.dehors@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The DVB plugin uses the FEC_2_5 and QAM_4_NR from the DVB API, which
were added only in kernel 3.7. This commit adds the necessary kernel
header version dependency, which fixes:
http://autobuild.buildroot.net/results/fab7afc3490d77a6b29760394337298f2fd55d51/
Thanks to Peter Seiderer for the investigation!
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream URL has changed on Sourceforge:
>>> libevent 2.0.22-stable Downloading
--2016-01-17 23:06:31-- http://downloads.sourceforge.net/project/levent/libevent/libevent-2.0/libevent-2.0.22-stable.tar.gz
Resolving downloads.sourceforge.net (downloads.sourceforge.net)... 216.34.181.59
Connecting to downloads.sourceforge.net (downloads.sourceforge.net)|216.34.181.59|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2016-01-17 23:06:31 ERROR 404: Not Found.
Additionally the project moved to github:
http://sourceforge.net/projects/levent/
"As of 2015-10-07, this project may now be found at
https://github.com/libevent/libevent."
This patch points Config.in to the new upstream URL and fixes the broken
download URL by using github.com.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the bump from 5.27 to 5.37 of bluez5_utils, the bluez code has
started using <wordexp.h> functionality. Unfortunately, our current
uClibc configuration does not have the wordexp functionality enabled,
so bluez5_utils cannot be built anymore.
In order to address this, we make bluez5_utils unavailable on
uClibc. This could be changed later by either removing the dependency
of bluez5_utils on wordexp support, or by deciding to add wordexp
support to our uClibc configuration.
Fixes:
http://autobuild.buildroot.org/results/831/83112559d84dc156141339a31e3e02f1a2af5155/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we now depend on !BR2_STATIC_LIBS to be able to build the
alsatplg tool, it makes sense to provide an option to install it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the definitions of the alsa-utils sub-options, the 'select' were
before the 'bool', which is unusual and does not follow how we do
things in general in Buildroot. This commit fixes that for all
alsa-utils suboptions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since recent bumps of alsa-lib and alsa-utils, alsa-lib installs
<alsa/topology.h>, which alsa-utils uses to build an alsatplg program
which requires <dlfcn.h>. Therefore, alsa-utils now needs dynamic
library support.
Fixes:
http://autobuild.buildroot.net/results/7ba954e03822d758e25356935b0dfc2c91d3712a/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patch taken from upstream [1].
Fixes ([2]):
code/Bitmap.cpp: In function 'std::size_t Assimp::Copy(uint8_t*, T&) [with T = short unsigned int, std::size_t = unsigned int, uint8_t = unsigned char]':
code/Bitmap.cpp:95:50: instantiated from here
code/Bitmap.cpp:87:9: error: lvalue required as unary '&' operand
[1] 756cfd4f74.patch
[2] http://autobuild.buildroot.net/results/7aa/7aafdc2633bad96a2a17f4e8664e09aae78a3bbd
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use proper 64-bit constant for CONVERT_FBX_TIME(time) conversion.
Fixes ([1]):
code/FBXConverter.cpp:2025: error: integer constant is too large for 'long' type
code/FBXConverter.cpp:2026: error: integer constant is too large for 'long' type
code/FBXConverter.cpp:2794: error: integer constant is too large for 'long' type
code/FBXConverter.cpp:2868: error: integer constant is too large for 'long' type
code/FBXConverter.cpp:2878: error: integer constant is too large for 'long' type
code/FBXConverter.cpp:2888: error: integer constant is too large for 'long' type
[1] http://autobuild.buildroot.net/results/885/8853b192d16ca7ef769c5352a2df0540a7a2a4fd
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The first patch merely fixes a warning. The other two are required
to use the module on Linux 4.x
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
netsniff-ng uses the TP_STATUS_VLAN_VALID define, provided by the
kernel headers. This definition has been added in the kernel by commit
a3bcc23e890a6d49d6763d9eb073d711de2e0469 ("af-packet: Add flag to
distinguish VID 0 from no-vlan"), which was merged in v3.0.
Fixes:
http://autobuild.buildroot.net/results/c87/c87a440e29ae387f600cb6ecce3caaa08557f4f0/
Signed-off-by: Joris Lijssens <joris.lijssens@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This way the busybox counterparts are overwritten and we will not end up
with procps-ng binaries in /usr/bin and /usr/sbin, and busybox symlinks
for the same tools in /bin and /sbin.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable building harfbuzz with the optional graphite2 support.
Also switch --without-X configure options to the correct/documented
--with-X=no syntax.
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-0777 - Client Information leak from use of roaming connection
feature.
CVE-2016-0778 - A buffer overflow flaw was found in the way the OpenSSH
client roaming feature was implemented. A malicious server could
potentially use this flaw to execute arbitrary code on a successfully
authenticated OpenSSH client if that client used certain non-default
configuration options.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: James Knight <james.knight@rockwellcollins.com>
Tested-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also remove merged patches.
So, autoreconf is no longer needed.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Match the systemd service file and set time immediately on startup
rather than small steps when it differs a lot.
On embedded scenarios this is better since boards that lack a
battery-backed RTC might start at unix epoch and the time set will delay
for quite a while otherwise.
For boards that do have a battery-backed RTC the behaviour will be
practically the same unless the RTC drifts a lot.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit e7d04dd2d replaced /etc/dropbear with a symlink to /var/run and
updated the start scripts to replace it with a real directory, so the
keys would be persistent. However, it turns out that this is pretty
confusing even for expert users, who don't know how to make the keys
really persistent now.
Update the help text explaining what the issue is, and telling the user
to replace the /etc/dropbear symlink with a symlink to a persistent
directory. Also mention the possiblity of unionfs.
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The revision 18153 dates from 2012-01-20. Lets update to latest changed revision
19427 which dates from 2015-01-07.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update to 1.0.11. Contains a lot of bugfixes
and some new features:
* mips{32r6,64r6} enablement
* argp support
* support for very simple /etc/gai.conf
* Xtensa nommu vfork fix
* systemd portability fixes
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mraa provides a unified interface for IO on Galileo, Edison,
Raspberry Pi and others.
Signed-off-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
Tested-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
