Fix the following message when libglib2 is enabled but not already
built:
Package glib-2.0 was not found in the pkg-config search path.
Perhaps you should add the directory containing `glib-2.0.pc'
No package 'glib-2.0' found
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following message when libfribidi is enabled but not already
built:
Package fribidi was not found in the pkg-config search path.
Perhaps you should add the directory containing `fribidi.pc'
No package 'fribidi' found
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add to HOST_SHARED_MIME_INFO_DEPENDENCIES the missing dependencies
host-libxml2 and host-libglib2.
Also remove from SHARED_MIME_INFO_DEPENDENCIES dependencies already
present in HOST_SHARED_MIME_INFO_DEPENDENCIES.
Fix build failure:
configure: error: Package requirements ( libxml-2.0 >= 2.4 glib-2.0 >= 2.6.0) were not met
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The rpi-firmware we currently package has a fiscious bug, that happens
in corner cases while reading config.txt (mostly seen on RPi-2, but may
also occur on RPi-1).
Both the DT-aware and DT-unaware branches are affected.
Bump to the latest rpi-firmware to fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix build failure:
./configure: line 11453: /home/tetsuya/buildroot/br/output/host/usr/bin/pkg-config: No such file or directory
configure: error: in `/home/tetsuya/buildroot/br/output/build/xcb-util-keysyms-0.3.9':
configure: error: The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
Fix build failure:
configure: error: Package requirements (xcb >= 1.4) were not met:
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The "make host-freetype-patch" fails because using the autogen.sh script
doesn't find the autoconf tool. The problem was already fixed for
"make freetype-patch" adding the "host-automake" as a prerequisite to
freetype-patch, so fix it by adding "host-automake" as a prerequisite to
"host-freetype-patch" too.
Fix build failure:
running `autoconf --force'
./autogen.sh: line 15: autoconf: command not found
error while running `autoconf --force'
package/pkg-generic.mk:146: recipe for target 'buildroot/output/build/host-freetype-2.5.5/.stamp_patched' failed
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a patch to fix a typo that on a system with make v4.0 and
BR2_CIVETWEB_WITH_LUA=y fails to build:
Makefile:203: *** mixed implicit and normal rules. Stop.
The patch was not sent upstream because this problem is already fixed on
master.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Lock to 3.18 headers; add comment about installing DTBs;
bump kernel sha1.
Reported-by: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pinentry sets the NCURSES_INCLUDE variable in the Makefile to
/usr/include/ncurses and that causes problems when cross-compiling
because it fails with an error like this one:
Making all in curses
make[3]: Entering directory `/br/output/build/pinentry-0.9.0/curses'
/br/output/host/usr/bin/mips64el-ctng_n64-linux-gnu-gcc -DHAVE_CONFIG_H
-I. -I.. -I/usr/include/ncursesw -I../pinentry -D_LARGEFILE_SOURCE
-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE
-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -Wcast-align
-Wshadow -Wstrict-prototypes -Wno-pointer-sign -c pinentry-curses.c
mips64el-ctng_n64-linux-gnu-gcc: ERROR: unsafe header/library path used
in cross-compilation: '/usr/include/ncursesw'
make[3]: *** [pinentry-curses.o] Error 1
Fixes:
http://autobuild.buildroot.net/results/5b9/5b9b53a37f7cf4bab4d989f852726a0f0885605f/
[Peter: use --with-ncurses-include-dir=none instead]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Change $CURL_CONFIG to $(CURL_CONFIG) in the patch
0004-use-correct-curl-config.patch because in a makefile the braces are
required to expand a variable.
Fix error messages:
make[3]: Entering directory '/home/tetsuya/buildroot/br2/output/build/libxmlrpc-1.25.30/lib/curl_transport'
make[3]: URL_CONFIG: Command not found
/bin/sh: line 0: test: <: unary operator expected
make[3]: URL_CONFIG: Command not found
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
configure looks for emacs installation to byte compile .el files. This may
break the build if the host installed emacs is missing needed dependencies.
Since we don't (yet?) package emacs for target, just disable detection of
emacs.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2015-1606: Use after free, resulting from failure to skip invalid packets
CVE-2015-1607: memcpy with overlapping ranges, resulting from incorrect
bitwise left shifts
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove libgc that is a copy of bdwgc but it's not used
by any package and gives an error when building make-4.1.
bdwgc is a mandatory dependency for guile.
Fixes:
http://autobuild.buildroot.net/results/b80a34a602b1241bc03cd43df1a269389d50e75c/
Reported-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Pedro Aguilar <paguilar@paguilar.org>
[baruch: added Reported-by, Config.in.legacy entry, autobuilder reference]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Stripping is globally handled by target-finalize (if enabled), so drop it
from here.
Reported-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libsrtp forget to link with zlib for static build when openssl
support is requested.
The issue was reported upstream by Vicente Olivert Riera:
https://github.com/cisco/libsrtp/issues/97
Backport upstream patch for the upcoming libsrtp 1.5.2.
Since the libsrtp package already use AUTORECONF, apply only
the changes for configure.in.
Fixes:
http://autobuild.buildroot.net/results/a71/a71d85a5bb9af2ee82a8e61054025bceb03dbdeb/
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As we don't need them, the tarball already contains generated documentation
and it fails to build with certain versions of db2html:
http://article.gmane.org/gmane.comp.lib.uclibc.buildroot/65165
Reported-by: Justin Swartz <justin.swartz@nym.hush.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
1] BR2_PACKAGE_GST_PLUGINS_GOOD_PLUGIN_QTDEMUX is not defined anywhere
2] qtdemux is not a plugin by itself but belongs to isomp4
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add qt5base '-psql_config' configure option and use it to set
pg_config path in configure step instead of legacy PSQL_LIBS
enviornment variable.
Fixes [1]:
PostgreSQL auto-detection... ()
make[1]: Entering directory `/home/peko/autobuild/instance-0/output/build/qt5base-5.4.0/config.tests/unix/psql'
/home/peko/autobuild/instance-0/output/host/usr/bin/sh-linux-gnu-g++ -c -pipe -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os --sysroot=/home/peko/autobuild/instance-0/output/host/usr/sh4a-buildroot-linux-gnu/sysroot -O2 -O3 -Wall -W -fPIE -I../../../mkspecs/devices/linux-buildroot-g++ -I. -I/usr/include/postgresql -o psql.o psql.cpp
sh-linux-gnu-g++: ERROR: unsafe header/library path used in cross-compilation: '/usr/include/postgresql'
make[1]: *** [psql.o] Error 1
make[1]: Leaving directory `/home/peko/autobuild/instance-0/output/build/qt5base-5.4.0/config.tests/unix/psql'
PostgreSQL disabled.
PostgreSQL support cannot be enabled due to functionality tests!
Turn on verbose messaging (-v) to ./configure to see the final report.
If you believe this message is in error you may use the continue
switch (-continue) to ./configure to continue.
make: *** [/home/peko/autobuild/instance-0/output/build/qt5base-5.4.0/.stamp_configured] Error 101
make: Leaving directory `/home/peko/autobuild/instance-0/buildroot'
[1] http://autobuild.buildroot.net/results/354/354bae2337703ad8bfb9d33c79538df3017b7fe9/
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
evtest uses asciidoc to generate documentation, but /usr/bin/asciidoc
will try to use buildroot's host-python which doesn't have the required
unicodedata. To avoid that, define ASCIIDOC as an empty string so the
Makefile can't find the executable and skips the documentation
generation. This is the same solution used in the evemu package.
Otherwise it will fail with this message:
make[1]: Entering directory `/br/output/build/evtest-1.32'
/usr/bin/make all-am
make[2]: Entering directory `/br/output/build/evtest-1.32'
File "/usr/bin/asciidoc", line 95
except KeyError, k: return None
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Although there is a link to that page from the main lm-sensors page, it is
quite hard to find.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
