libcap can optionally link to libattr to support extra
file capabilities. Link to this library and pull it as
dependency if BR2_PACKAGE_ATTR is selected.
[Peter: use LIBCAP_ prefix on variable]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
HPLIP (Hewlett-Packard Linux Imaging & Printing) is an HP-developed solution
for printing, scanning, and faxing with HP inkjet and laser based printers
in Linux.
[Peter: fix Config.in white space]
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Previously, the crosstool-NG backend did depend on the top-level
Buildroot's .config to detect changes in the toolchain options,
using a tentatively-clever heuristic, which also included the full
Buildroot's version string to push down to set the components' versions
strings.
In doing so, any commit in the Buildroot tree would imply a complete
rebuild of the toolchain, even in the case the toolchain options did
not change, thus being a large annoyance (to say the least).
As Buildroot never guaranteed that toolchain options would be detected,
even less handled, and that the internal backend does neither detect nor
act on toolchain options changes, and delegate that to the user, there
is no point in individualising the crosstool-NG backend's behaviour.
This reasoning also applies to the depdency on the crosstool-NG's bundled
.config file, too.
So, just drop the not-so-clever heuristic, and just build the toolchain
once, leaving to the user the responsibility to explictly ask Buildroot
to rebuild the toolchain.
Reported-by: "Przemyslaw Wrzos" <przemyslaw.wrzos@calyptech.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: "Przemyslaw Wrzos" <przemyslaw.wrzos@calyptech.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: wrap help text]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Needed later by genimage.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add dosfstools as a host-package selection in the menuconfig.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the e2fsprogs as a host-package selection in the menuconfig.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This fixes the following errors when building util-linux v2.22.2 for
the host in case the PAM headers are missing:
configure: error: login selected, but required PAM header file not available
configure: error: su selected, but required PAM header file not available
Signed-off-by: Christophe Vu-Brugier <cvubrugier@lacie.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If you do a "make -s", you will notice that the UPDATE_CONFIG_HOOK message
has an extra space compared to other highlighted messages. For example:
>>> util-linux 2.20.1 Updating config.sub and config.guess
>>> util-linux 2.20.1 Patching libtool
>>> util-linux 2.20.1 Autoreconfiguring
A grep shows this is the only instance of the extra space. This patch
removes the extra space.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Install libfribi to staging to be able to link against it.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The patches to oprofile 0.9.7 seem still relevant for 0.9.8, but for some
reason they were not upstepped.
[Peter: drop version number from patch filenames]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a couple of patches submitted by Mike Frysinger to gpsd upstream. One of
these patches (that for the gpsd/dbus interface) fixes autobuild failures
such as the following.
http://autobuild.buildroot.net/results/41ccc838c5d44ab237a7195767940585bbb8b1f6
Note that neither of these patches has yet been accepted upstream.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
JSON-GLib is a library providing serialization and deserialization
support for the JavaScript Object Notation (JSON) format described by
RFC 4627.
https://live.gnome.org/JsonGlib/
[Peter: add license info, tweak help text]
Signed-off-by: Henrique Camargo <henrique@henriquecamargo.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Little CMS intends to be an OPEN SOURCE small-footprint color management
engine, with special focus on accuracy and performance.
[Peter: tweak help text, fix white space]
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The zeromq package was recently bumped from version 2.2.0 to version 3.2.2,
which has introduced a requirement for IPv6 support in the toolchain. At
present, IPv6 support is mandatory in zeromq: there is no configuration option
to enable/disable the feature.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Use the <pkg>_CONFIG_SCRIPTS mechanism to handle the sdl-config
script, so that it properly gets removed from the target. However, we
can't completely remove the manual fixup, because it also takes care
of removing the -Wl,-rpath option, which the general
<pkg>_CONFIG_SCRIPTS doesn't do.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
urg installs two <foo>-config scripts, so the ones installed in
$(STAGING_DIR) should be fixed up, and the ones installed in
$(TARGET_DIR) should be removed. Use the <pkg>_CONFIG_SCRIPTS
infrastructure to do this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The urg.mk file mentions a LGPLv3+ license. However, none of the
source code in the urg package carries a copyright notice that
indicates the "v3 or later". The only license information we have is
the COPYING file, that contains the text of the LGPLv3
license. Therefore, we should probably assume that the code is under
LGPLv3 only.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Based off of patches posted by (and Signed-off-by:) Jonathan Liu <net147@gmail.com>
[Peter: fix Config.in whitespace]
Signed-off-by: Daniel Price <daniel.price@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Google's framework for writing C++ tests on a variety of platforms (Linux,
Mac OS X, Windows, Cygwin, Windows CE, and Symbian). Based on the xUnit
architecture. Supports automatic test discovery, a rich set of assertions,
user-defined assertions, death tests, fatal and non-fatal failures, value-
and type-parameterized tests, various options for running the tests, and XML
test report generation.
Gtest also allows to easily build testsuites for C programs.
This package allows running testsuites on the target which might be
advantgeous in certain cases.
http://code.google.com/p/googletest/
[Peter: Tweak Config.in, use GTEST_VERSION in _SOURCE]
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: drop 'library' from name]
Cc: Eric Jarrige <eric.jarrige@armadeus.org>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This adds support for Pragmatic General Multicast protocol on raw
IP (PGM, RFC 3208) or UDP frames (EPGM) for use as zeromq reliable
multicast transport. The library relies on openpgm package to
implement the protocol itself.
Signed-off-by: Alexander Lukichev <alexander.lukichev@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
OpenPGM is an open source implementation of the Pragmatic General
Multicast (PGM) specification in RFC 3208 available at www.ietf.org.
It is required for PGM/EPGM support in ZeroMQ library.
Signed-off-by: Alexander Lukichev <alexander.lukichev@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When using rsync to import package sources (typically with
PKG_OVERRIDE_SRCDIR), it often happens that these external sources
are under version control, and contain directories like .git,
.hg, etc.
Depending on the project, these directories can become pretty large
and typically have a lot of files. Moreover, they are not necessary
in the context of building the package. Therefore, this commit adds
the --cvs-exclude option to the rsync call, saving both disk space
and sync time.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Eric Jarrige <eric.jarrige@armadeus.org>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Julien Boibessot <julien.boibessot@armadeus.com>
Cc: Eric Jarrige <eric.jarrige@armadeus.org>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since ROOTFS_DEVICE_TABLES is a concatenation of two strings separated by
spaces, there will always be a space in it, which means it's never empty.
Therefore, when testing for empty, the condition never evaluate to false.
The following change fixes this problem; it runs qstrip on the overall
combination of the variables, causing the space to be removed if it's the
only thing left.
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Thomas De Schampheleire <patrickdepinguin+buildroot@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
AT91Bootstrap 1.x seems to have disappeared from atmel.com (but return
HTML instead of a 404), so use the at91.com FTP server instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is the time zone database, used by glibc for translations between
UTC and local time.
Signed-off-by: Richard Braun <rbraun@sceen.net>
[yann.morin.1998@free.fr: use global ZIC, install posix TZ only once]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
