The new wpa_supplicant command line argument -M can be used to describe
matching rules with a wildcard interface name (e.g., "wlan*").
This is very useful for systems without udev.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove all patches as they are applied to or were fetched from upstream.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove patches applied upstream. As we are not touching configure.ac or
Makefile.am anymore there is no need for AUTORECONF.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove patches applied upstream. No need to set AUTORECONF anymore.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When linking both zlib and libblkid statically in the same target a
collision occurs. Fix this by prefixing publicly-visible crc32 library
functions. Fixes:
http://autobuild.buildroot.net/results/25e/25efb79dd6ff1d93b5775baeccda23194d68c711/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Needed for the upcoming python-mwscrape2slob package.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Needed for the upcoming python-slob package.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Needed by the upcoming python-mwscrape2slob package.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: move "select" after "bool".]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the initial support for mx6q/dl udoo boards.
For information about these boards, please visit:
http://www.udoo.org/
In linux.fragment we disable USB support for now because kernel 4.8
hangs on udoo board.
This is been addressed by Peter Chen's kernel patch series that provides
a standard way to reset a USB hub.
When such series hit mainline, then we can bump the kernel and remove
linux.fragment.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since U-Boot supported SPL for Zynq boards at v2014.04 release, it
became much easier to build a system. At that time, however, users
still needed to manually copy ps7_init.c/h to the U-Boot source tree
to generate a working SPL image because ps7_init.c/h output from
Xilinx tools are not compatible with GPL.
Later, the license problem was solved when Xilinx tools became able
to output the GPL-compatible variants (ps7_init_gpl.c/h) as well.
U-Boot v2015.07 or later includes ps7_init_gpl.c/h for major Zynq
boards so that users can build a boot image straight away.
Now Buildroot supports 3 boards (Zedboard, MicroZed, ZC706) without
any manual intervention. This is a good thing itself, but commit
b9cd72cdbf ("zynq_zc706: bump U-Boot to xilinx-v2016.2") entirely
dropped the information about custom ps7_init files.
This commit provides up-to-date guidance for how to customize the
ps7_init files.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
[Thomas: rewording and formatting tweaks.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
U-Boot 2016.09.01 is a bugfix release, so bump to this version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building sysklogd with glibc 2.24 fails with the following error:
syslogd.c: In function ‘reapchild’:
syslogd.c:2097:13: error: storage size of ‘status’ isn’t known
union wait status;
^
Makefile:99: recipe for target 'syslogd.o' failed
make[2]: *** [syslogd.o] Error 1
make[2]: *** Waiting for unfinished jobs....
package/pkg-generic.mk:201: recipe for target './buildroot/output/build/sysklogd-1.5.1/.stamp_built' failed
make[1]: *** [./buildroot/output/build/sysklogd-1.5.1/.stamp_built] Error 2
Makefile:41: recipe for target '_all' failed
make: *** [_all] Error 2
union wait was marked deprecated in glibc 2.23 and removed in glibc 2.24.
The fix is to declare it as an int.
See https://sourceware.org/ml/libc-alpha/2016-02/msg00342.html
Sent upstream via their mailing list
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For example gcc 4.8.x fails to build uClibc-ng for mips/mips64.
Check if feature exist before using it.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 4c7c010f9f.
The bump to libglib2 2.25.0 causes a large number of build failures due
to the redefinition of crc32() in both util-linux libblkid and
zlib.
Fixes:
http://autobuild.buildroot.net/results/ac65c9177dd63fc8d76dba3b9845f81b15faa716/
(and approximately 500 other similar build failures)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 71c5a81c96.
The bump to libglib2 2.25.0 causes a large number of build failures due
to the redefinition of crc32() in both util-linux libblkid and
zlib. This commit is related to the bump, so it needs to get reverted as
well.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
http://autobuild.buildroot.net/results/205463c9ea8651911972c2835e28ded1912c811ahttp://autobuild.buildroot.net/results/5e9279ee60c11a3dacacf6d78f87f8d1b92968f5http://autobuild.buildroot.net/results/97043f8defd5a59ae39b4c7f095a10d15c7fe632http://autobuild.buildroot.net/results/e775126d5939093289b1a833dd6323ac293322ed
.. and many more.
libmpdclient, libmicrohttpd and jsoncpp provide a .pc file. Use
pkg-config for detecting the libraries and for providing the necessary
details for compiling and linking.
The current build system of upmpdcli does not use PKG_CHECK_MODULES, but
AC_LINK_IFELSE to detect jsoncpp. After bumping jsoncpp version from
1.7.2 to 1.7.5 the detection fails, because the test program does not
compile anymore:
"""
In file included from
/usr/arm-buildroot-linux-gnueabi/sysroot/usr/include/json/autolink.h:9:0,
from
/usr/arm-buildroot-linux-gnueabi/sysroot/usr/include/json/json.h:9,
from test.c:1:
/usr/arm-buildroot-linux-gnueabi/sysroot/usr/include/json/config.h:155:9:
error: 'int64_t' does not name a type
typedef int64_t Int64;
^
/usr/arm-buildroot-linux-gnueabi/sysroot/usr/include/json/config.h:156:9:
error: 'uint64_t' does not name a type
typedef uint64_t UInt64;
^
/usr/arm-buildroot-linux-gnueabi/sysroot/usr/include/json/config.h:158:9:
error: 'Int64' does not name a type
typedef Int64 LargestInt;
^
/usr/arm-buildroot-linux-gnueabi/sysroot/usr/include/json/config.h:159:9:
error: 'UInt64' does not name a type
typedef UInt64 LargestUInt;
^
In file included from
/usr/arm-buildroot-linux-gnueabi/sysroot/usr/include/json/json.h:10:0,
from test.c:1:
/usr/arm-buildroot-linux-gnueabi/sysroot/usr/include/json/value.h:184:11:
error: 'UInt64' in namespace 'Json' does not name a type
typedef Json::UInt64 UInt64;
[..]
"""
Instead of fixing the test program use PKG_CHECK_MODULES to check for
jsoncpp. While we're on it, add it for libmpdclient and libmicrohttpd,
too.
Upstream-status: https://github.com/medoc92/upmpdcli/pull/52
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also add a comment to indicate that python-rtslib-fb and
python-configshell-fb should be bumped every time targetcli-fb is bumped
because upstream usually upgrades all of these packages at the same
time.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also add a comment to indicate that python-rtslib-fb and targetcli-fb
should be bumped every time python-configshell-fb is bumped because
upstream usually upgrades all of these packages at the same time.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also add a comment to indicate that python-configshell-fb and
targetcli-fb should be bumped every time python-rtslib-fb is bumped
because upstream usually upgrades all of these packages at the same
time.
Another comment warns that switching this package to PyPI would make us
miss new versions of python-rtslib-fb.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
