The base configuration now provide a glibc toolchain,
we can safely switch to it.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The base configuration now provide a glibc toolchain,
we can safely switch to it.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The base configuration now provide a glibc toolchain,
we can safely switch to it.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The base configuration now provide a glibc toolchain,
we can safely switch to it.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The base configuration now provide a glibc toolchain,
we can safely switch to it.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While at it remove Glibc from the test name since all Timezone
now use a Glibc toolchain.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The base configuration now provide a glibc toolchain,
we can safely switch to it.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The base configuration now provide a glibc toolchain,
we can safely switch to it.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch updates the default toolchain used for runtime tests. The
last time this toolchain was updated was in commit
0207a65323 3 years ago. Since then,
multiple things have changed:
Firstly, it used uclibc-ng as the libc whereas since commit
4057e36ca9, glibc is used as the default
library.
And secondly, since commit 531b2a10cd, buildroot
dropped the support for gcc 8 and it cannot be built internally anymore.
So the testsuite was executed using a toolchain that can't be built by
the Buildroot internal toolchain backend anymore.
This new Bootlin toolchain stable 2022.08-1 is based on gcc 11.3.0,
linux headers 4.9.327, glibc 2.35 and binutils 2.38.
The previous toolchain bleeding edge 2018.11-1 is based on gcc 8.2.0,
linux headers 4.14.80, uclibc 1.0.30 and binutils 2.31.1
Nowadays Bootlin toolchains are packaged in Buildroot and we can
directly select them from BASIC_TOOLCHAIN_CONFIG and avoid
setting the toolchain parameters (BR2_TOOLCHAIN_EXTERNAL_CUSTOM...).
The switch to Glibc requires to update some tests for the following
reasons:
- TestPython3Py, TestPython3Pyc and TestPython3PyPyc has been updated
since they use the libc binary file name in their test
(uClibc: libc.so.1 vs Glibc: libc.so.6).
- TestTmux needs at least one locale to pass (as stated in tmux help
text "tmux needs a working UTF-8 locale"), so use "C.UTF-8".
- TestOpenSsh needs a toolchain >= 5.x due to a openssh issue
(Similar to: https://bugs.busybox.net/show_bug.cgi?id=13671)
Use the Bootlin toolchain bleeding-edge 2022.08-1 rhat provide
kernel headers 5.4
- TestShadow needs a toolchain >= 4.14
Use the Bootlin toolchain bleeding-edge 2022.08-1 rhat provide
kernel headers 5.4
Runtime tested on the gcc farm server.
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We are going to update the toolchain used by the Buildroot testsuite
and this update will break the kernel build with the Bootlin stable
toolchain due to an latent issue.
Fixes:
arch/x86/entry/thunk_64.o: warning: objtool: missing symbol table
make[4]: *** [scripts/Makefile.build:361: arch/x86/entry/thunk_64.o] Error 1
make[4]: *** Deleting file 'arch/x86/entry/thunk_64.o'
make[4]: *** Waiting for unfinished jobs....
[fixed since kernel 6.0]
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=de979c83574abf6e78f3fa65b716515c91b2613d
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We are going to update the toolchain used by the Buildroot testsuite
and this update will increase the size of the rootfs over 120M.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We are going to update the toolchain used by the Buildroot testsuite
and this update will increase the size of the rootfs over 120M.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We are going to update the toolchain used by the Buildroot testsuite
and this update will increase the size of the rootfs over 120M.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This new Bootlin toolchain stable 2022.08-1 is based on gcc 11.3.0,
linux headers 4.9.327, glibc 2.35 and binutils 2.38.
Nowadays Bootlin toolchains are packaged in Buildroot and we can
directly select them from BASIC_TOOLCHAIN_CONFIG and avoid
setting the toolchain parameters (BR2_TOOLCHAIN_EXTERNAL_CUSTOM...).
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The kernel 6.1.x is the latest LTS version.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Following the toolchain-external-arm-aarch64 bump to version 12.2-rel1
by commit [1], binutils 2.39 is now provided by the toolchain.
This new binutils version break the ATF build due to new linker warnings as
reported by the EDK2 test:
ld.bfd: warning: bl2.elf has a LOAD segment with RWX permissions
From [2]
"Users of GNU ld (BPF) from binutils 2.39+ will observe multiple instaces
of a new warning when linking the bl*.elf in the form:
ld.bfd: warning: stm32mp1_helper.o: missing .note.GNU-stack section implies executable stack
ld.bfd: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
ld.bfd: warning: bl2.elf has a LOAD segment with RWX permissions
ld.bfd: warning: bl32.elf has a LOAD segment with RWX permissions
These new warnings are enbaled by default to secure elf binaries:
- https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
- https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=0d38576a34ec64a1b4500c9277a8e9d0f07e6774
"
Bump the ATF custom version to 2.9 for binutils 2.39+ support.
[1] 90404e84c1
[2] 1f49db5f25
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4581325484
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a helper class providing a template for testing data
compressor and decompressor programs such as gzip, bzip2, xz...
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Python-docker needs a working docker setup to do anything useful, so add it
to the existing docker_compose (which tests docker and docker-compose)
rather than adding a completely new test.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages (e.g. libjxl) requires a quite recent cmake version,
that is not yet available in most distributions, especially those
LTS versions.
Currently, when we bump the minimum cmake version we require, it gets
bumped for all packages, regardless of their own minimum required
version, which means that a given configuration will trigger the
build of our host-cmake even if the packages that require it are not
enabled and those that are would be content with the system-provided
cmake.
Since host-cmake can take quite some time to build, this can get a
bit annoying to pay the price of a host-cmake build that would
otherwise not be needed.
Some packages even use an alternative build system when available
since they requires a more recent version of cmake than the our
minimum cmake version
(wpewebkit use Ninja: 78d499409f).
We introduce config options that packages can select to indicate
what minimal cmake version they require, and use that version as the
required minimal version required by the current configuration [0].
We would like to ensure that the currently selected minimum cmake
version is indeed lower (or equal) to the cmake version we package,
but that is not possible: dependencies.mk is parsed before we parse
packages, so we do not yet know the cmake version we have, and we
can't invert the parsing order as we need to know the required
dependencies before we parse packages (so that we can build their
dependency rules in Makefile). So we can only add comments in both
places, that refer to the other location.
[0] note that this is yet not optimal, as in such a case, host-cmake
would be in the dependency chain of all cmake-based packages, even
for those packages that do not require it. The optimum would be for
each package to gain such a dependency on an as-needed basis, but
this is by far more complex to achieve, and would only speed up
cases where a single package is built from scratch (e.g. with:
make clean; make foo), which is not worth optimising (yet?)
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Julien Olivain <ju.o@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Artefact (British) and Artifact (American) are both valid spelling
but ARTIFACTS_URL is used in the emulator code.
Surprisingly, the url actually use "artefacts"
http://autobuild.buildroot.net/artefacts
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The commit f69c972ae6 (support/testing/tests/package/test_kexec.py:
new runtime test) was tested locally with a qemu version (>= 7.x) more
recent than the one available in our buidroot/base Docker image (5.2).
As a consequence, that test fails to run in gitlab-ci as reported by [1].
Remove "dtb-kaslr-seed=off" from the Qemu command line and pass
a custom devicetree to qemu virt machine. This devicetree is
based on qemu aarch64 5.2 dts with kaslr-seed set 0.
The qemu aarch64 devicetree has been exported [2] and updated with the
following method:
qemu-system-aarch64 -machine virt -machine dumpdtb=qemu-aarch64-virt-5.2-machine.dtb
dtc -I dtb qemu-aarch64-virt-5.2-machine.dtb > qemu-aarch64-virt-5.2-machine.dts
edit the dts and replace kaslr-seed parameter by "kaslr-seed = <0 0>;"
As soon as our buidroot/base Docker image is updated and a newer qemu version
is available, we can safely revert this change and use the initial method.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4322819092
[1] http://lists.busybox.net/pipermail/buildroot/2023-May/668091.html
[2] https://u-boot.readthedocs.io/en/latest/develop/devicetree/dt_qemu.html#obtaining-the-qemu-devicetree
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Signed-off-by: Julien Olivain <ju.o@free.fr>
Tested-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The br-arm-internal-glibc.config used to be generally used as a configuration
to test the bleeding edge versions of components. However, it has been
lagging behind somewhat and produce invalid configuration since binutils 2.36
removal in d08639e6b9e5... so let's bring it up-to-date:
- Binutils 2.39.x
- GCC 12.x
Since Buildroot 2022.02, the autobuilders doesn't use the csv file anymore
but the test-pkg script still use it.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With the current python-botocore version, the test times out on
machines on which it was passing with previous versions. Increase the
timeout so that the test can be run without using a timeout
multiplier.
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
For various reasons, like debugging or compliance, it is important to
identify what br2-external trees versions were used for a specific
build.
Add a Kconfig option that contains the version as computed by
support/scripts/setlocalversion; this will appear in the .config file
(but not in defconfig files, which is what we want).
Also generate that variable on the .mk side, so that it gets properly
exported in the environment, for post-build of post-iamge scripts to use
as they see fit (like, ensuring there is no dirtyness when in a CI for
example).
Reported-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, the list of external trees is a private variable, but for
debugging or compliance, one may need to get that list.
Add a Kconfig option so that the list appears in the .config file, and
export the already existing .mk variable in the environment, so that
post-build or post-image scripts can use it.
Reported-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 8025cfad10)
[Peter: drop Makefile hunk]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 2dff6e93ca (package/readline: add upstream patch to fix crash
with invalid locale specification) fixed a regression in readline 8.2
[0], that could have been caught with a runtime test. readline is a
library, so we need an executable that exercises readline.
Since readline and bash are developped in tandem [1], it is only logical
to use bash to test readline.
Add a new runtime test for bash, that checks that we can indeed run an
interactive shell, and that an non-existing locale does not cause the
dreaded segfault. We do not use the default configuration, because it
uses a uclibc toolchain, and we want to reproduce against a glibc one.
[0] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1021109
[1] https://tiswww.case.edu/php/chet/readline/rltop.html#Bugs
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The past participle for "to fix" is "fix". The "did you forget" got
eluded into "forget", so again a past participle.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Teach check-package to detect python files by type and check them using
flake8.
Do not use subprocess to call 'python3 -m flake8' in order to avoid too
many spawned shells, which in its turn would slow down the check for
multiple files. (make check-package takes twice the time using a shell
for each flake8 call, when compared of importing the main application)
Expand the runtime test and the unit tests for check-package.
Remove check-flake8 from the makefile and also from the GitLab CI
because the exact same checks become part of check-package.
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Arnout: add a comment to x-python to explain its purpose]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Provides python interface to database stored in hwdata
package. It allows you to get human readable description of
USB and PCI devices.
https://github.com/xsuchy/python-hwdata
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
support/testing/tests/package/test_shadow.py:55:1: W391 blank line at end of file
1 W391 blank line at end of file
make: *** [Makefile:1253: check-flake8] Error 123
https://gitlab.com/buildroot.org/buildroot/-/jobs/3918132888
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The kernel config board/qemu/aarch64-sbsa/linux.config has never been in
use by qemu_aarch64_sbsa_defconfig, neither via
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE, nor via
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES.
test_edk2.py is using the kernel config
board/qemu/aarch64-sbsa/linux.config. However, storing a kernel config
that is not used by qemu_aarch64_sbsa_defconfig, in a directory that is
"owned" by qemu_aarch64_sbsa_defconfig, is bound to cause confusion.
Therefore, move the config file to a new subdirectory:
support/testing/tests/boot/test_edk2/
This is similar to how e.g. test_grub.py has a subdirectory:
support/testing/tests/boot/test_grub/
where it keeps the kernel config that is only used by test_grub.py.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ace needs FileHandle module:
Can't locate FileHandle.pm in @INC (you may need to install the FileHandle module) (@INC contains: /home/buildroot/autobuild/instance-0/output-1/host/lib/perl /usr/local/lib64/perl5/5.36 /usr/local/share/perl5/5.36 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5) at /home/buildroot/autobuild/instance-0/output-1/build/ace-7.0.6/MPC/prj_install.pl line 17.
BEGIN failed--compilation aborted at /home/buildroot/autobuild/instance-0/output-1/build/ace-7.0.6/MPC/prj_install.pl line 17.
Fixes:
- http://autobuild.buildroot.org/results/9dee7c09fd7b41d276df0285a0f3dcae1a71f041
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 71ddf1a084)
[Peter: drop Makefile change]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure:
Can't locate object method "hexhash" via package "MD5" at utils/git-testament.pl line 47
Fixes:
- http://autobuild.buildroot.org/results/3dddcbbe7f6ecae5a2db6fac11fb659719452f73
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
shadow provides utilities to deal with user accounts.
The shadow package includes the necessary programs for converting UNIX
password files to the shadow password format, plus programs for managing
user and group accounts. Especially it is useful if rootless podman
container should be used, which requires newuidmap and newgidmap.
Co-authored-by: Nicolas Carrier <Nicolas.Carrier@orolia.com>
[Nicolas.Carrier@orolia.com provided the test case]
Signed-off-by: Raphael Pavlidis <raphael.pavlidis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
I do constantly get mails that fluent-bit fails to build for s390x.
So added this to ensure that the s390x architecture is checked as well
if I manually do:
$ ./utils/test-pkg -p fluent-bit -a
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libjxl is the reference implementation of JPEG XL (encoder and decoder).
https://github.com/libjxl/libjxl
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Highway is a C++ library that provides portable SIMD/vector intrinsics.
https://github.com/google/highway
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 04154a6517 (support/download/cargo-post-process: cargo
output for vendor config), we switched away from our hand-crafted
cargo.toml mangling, to use cargo itself to update that file.
In doing so, we enabled the shell pipefail option, so that we could
catch cargo failures, while redirecting its output through tee to the
cargo.toml.
However, pipefail is overzealous, and will hit us even for pipes we do
not want to globally fail, like the one that actually checks whether an
archive is already vendored or not:
if tar tf "${output}" | grep -q "^[^/]*/VENDOR" ; then
...
with pipefail, the above may always fail:
- if the tarball is already vendored, grep will exit on the first
match because of -q (it only needs a single match to decide that its
return code will be zero), so the | will get closed, and tar may
get -EPIPE before it had a chance to finish listing the archive, and
thus would terminate in error;
- if the tarball is not vendored, grep will exit in error.
It turns out that the tee was only added so that we could see the
messages emitted by cargo, and still fill the cargo.tom with the output
of cargo.
But that's a bit overkill: the cargo messages are going to stderr, and
the blurb to add to cargo.toml to stdout, so we just need to redirect
stdout.
Yes, we do not see what cargo added to cargo.toml, but that is not so
interesting.
Still, cargo ends its messages with a suggestion for the user to modify
cargo.toml, with:
To use vendored sources, add this to your .cargo/config.toml for this project:
But since we've already redirected that to cargo.toml, there is nothing
for the user to edit, so the above can get confusing. Emit a little
blurb that states that everything is under control.
And then we can drop pipefail.
Note: the go-post-process initially had pipefail too, but it was dropped
in bfd1a31d0e (support/download/go-post-process: drop -o pipefail) as
it was causing spurious breakage when extracting the archive before
vendoring, so it is only reasonable that we also remove it from the
cargo-post-process.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Simon Richter <simon.richter@ptwdosimetry.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/12a/12a63ae177fe3ed0c9a1ef2fa01870f334f36b0f/
Currently, when the post-process helper fails while downloading from
upstream, there is no fallback to the backup mirror.
In case the post-process helper fails, we must consider that to be a
download failure, so we must bail out as if the download backend itself
did fail, but we fail to do so.
Duplicate the logic we have for the download helper: if the post-process
helper fails, remove the downloaded stuff, and continue on to the next
URI, which will ultimately hit the backup mirror (if one has been
configured).
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/820/820e98b1c126469b1f180f078d102ded43b9c40e/
scripts/Makefile.am of mosh-1.4.0 needs the perl diagnostics module on the host:
make[3]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/mosh-1.4.0/scripts'
perl -Mdiagnostics -c ./mosh.pl
Can't locate diagnostics.pm in @INC (you may need to install the diagnostics module) (@INC contains: /home/buildroot/autobuild/instance-2/output-1/host/lib/perl /usr/local/lib64/perl5/5.36 /usr/local/share/perl5/5.36 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5).
BEGIN failed--compilation aborted.
So add a check for it in dependencies.sh similar to the other perl modules.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds two new test cases:
- TestNodeJSBasic which builds a target configuration with just
NodeJS enabled, and which runs a very simple NodeJS script on the
target.
- TestNodeJSModule, which builds a target configuration with NodeJS
enabled + the installation of one extra module, which means npm on
the host (from host-nodejs) is used, and which runs a very simple
NodeJS script on the target that uses this extra module.
Having both tests separately allows to validate that both nodejs-only
and nodejs+host-nodejs configurations behave correctly, at least in
minimal scenarios.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently only SysV init scripts are checked using shellcheck and a few
other rules (e.g. variable naming, file naming).
Extend the check using shellcheck to all shell scripts in the tree.
This is actually limited to the list of directories that check-package
knows that can check, but that list can be expanded later.
In order to apply the check to all shell scripts, use python3-magic to
determine the file type. Unfortunately, there are two different python
modules called "magic". Support both by detecting which one is installed
and defining get_filetype accordingly.
Keep testing first for name pattern, and only in the case there is no
match, check the file type. This ensures, for instance, that SysV
init scripts follow specific rules.
Apply these checks for shell scripts:
- shellcheck;
- trailing space;
- consecutive empty lines;
- empty last line on file;
- newline at end of file.
Update the list of ignored warnings.
Do not add unit tests since no function was added, they were just
reused.
But expand the runtime test for check-package using as fixture a file
that generates a shellcheck warning.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Arnout: support both variants of the "magic" module]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The go vendoring fails on CentOS 7 (which uses git 1.8.3.1) with errors
related to shallow clones:
make docker-compose-source
..
go: downloading github.com/matttproud/golang_protobuf_extensions v1.0.4
github.com/docker/compose/v2/pkg/mocks imports
github.com/theupdateframework/notary/client imports
github.com/docker/go/canonical/json: github.com/docker/go@v1.5.1-1.0.20160303222718-d30aec9fd63c: invalid pseudo-version: git fetch --unshallow -f origin in /home/jacmet/source/buildroot-mirror/output/host/share/go-path/pkg/mod/cache/vcs/48fbd2dfabec81f4c93170677bfc89087d4bec07a2d08f6ca5ce3d17962677ee: exit status 128:
fatal: git fetch-pack: expected shallow list
make[1]: *** [/home/jacmet/source/buildroot-mirror/output/build/docker-compose-2.15.1/.stamp_downloaded] Error 1
It works with git 2.0.0 (released May 2014, included in Debian 8), so check
for >= 2.0.0 with logic similar to the GNU patch version check.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When gitlab prepares a job to run, it checks out the repository with a
non-root user, and spawns a container that runs as root, with some UID
mapping that makes the files be owned by root in the container. However,
our pipelines run as a nont-root user.
Commit bde165f7ad (.gitlab-ci.yml: update Docker image to use) updated
the docker image that is used to run in our pipelines.
That new image includes a git version that is stricter about the
ownership of the git tree it is acting in: git aborts in error when the
user running it does not own the repository.
We use `git ls-tree` quite a lot in our check-{flake8,package,symbols}
rules, so they all fail (in various ways).
To fix this, we either need to fix the ownership or tell git to ignore
the situation.
It is most probably impossible to change the ownership of the files: we
run as non-root,and the files belong to root (in the container). So
we're stuck.
The alternative, is to do as git suggest, and tell it to ignore the
situation. In a local setup, this would be very insecure, but in the
pipelines, this is in a throw-away container, where a single user exists
and is running, so we don't care much (if at all).
Add a global before_script that registers the git config to ignore
ownership issues in the buildroot repository; see [0] for the definition
of the CI_PROJECT_DIR variable. Note: unlike what is said in there, and
in [1], the value actually seen in CI_PROJECT_DIR is already prefixed
with CI_BUILDS_DIR (the documentation is unclear about that point).
[0] https://docs.gitlab.com/ee/ci/variables/predefined_variables.html
[1] https://docs.gitlab.com/runner/configuration/advanced-configuration.html#the-runners-section
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When gitlab prepares a job to run, it checks out the repository with a
non-root user, and spawns a container that runs as root, with some UID
mapping that makes the files be owned by root in the
container. However, our pipelines run as a nont-root user.
Commit bde165f7ad (.gitlab-ci.yml: update Docker image to use) updated
the docker image that is used to run in our pipelines.
That new image includes a git version that is stricter about the
ownership of the git tree it is acting in: git aborts in error when the
user running it does not own the repository.
We use `git ls-tree` quite a lot in our check-{flake8,package,symbols}
rules, so they all fail (in various ways).
To fix this, we either need to fix the ownership or tell git to ignore
the situation. In either case, we'll need to run a scriptlet before all
our jobs.
Gitlab-ci allows to provide a global before_script, that is inherited by
all jobs. However, some of our jobs already declare a before_script, and
that would shadow the global before_script.
There is no technical reason to do our before_script separately from
the actual script, so we move the code from the before_scripts to the
corresponding scripts.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The gcc plugin test was not using the -q option to grep causing it to print
the line to stdout, so fix that.
While we're at it, adjust the locale check to use grep -q instead of
redirecting to /dev/null for consistency with the other checks.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
snapshot.debian.org is notoriously slow, and quite often leads to
timeouts when downloading packages. To give us a better chance of
succeeding, let's retry 3 times before failing.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
SPAKE2 password-authenticated key exchange (in pure python).
This library implements the SPAKE2 password-authenticated key
exchange ("PAKE") algorithm. This allows two parties, who share a
weak password, to safely derive a strong shared secret (and
therefore build an encrypted+authenticated channel).
https://github.com/warner/python-spake2
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 4cdd99190e (support/dependencies/dependencies.sh: require open perl
package for libxcrypt) added a check for the "open" perl module for
libxcrypt, but it does not work as "open" cannot be directly used with
"require" as an argument is needed:
perl -e "require open"
Not enough arguments for open at -e line 1, at EOF
Execution of -e aborted due to compilation errors.
So special case the check to instead check with "use open ':std'".
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/16c/16cba783be11cc5024f9c56bb0a7abb0acf13ef8/
The configure script of libxcrypt needs the open perl module on the host:
Can't locate open.pm in @INC (you may need to install the open module) (@INC
contains: /home/buildroot/autobuild/instance-2/output-1/host/lib/perl
/usr/local/lib64/perl5/5.36 /usr/local/share/perl5/5.36
/usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5
/usr/share/perl5) at ./build-aux/scripts/expand-selected-hashes line 20.
So add a check for it in dependencies.sh similar to how it is done for mpv.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit d631615eb1 (support/testing: test check-package ignore list) added
a too long line causing the check-flake8 target to fail:
support/testing/tests/utils/test_check_package.py:233:133:
E501 line too long (138 > 132 characters)
https://gitlab.com/buildroot.org/buildroot/-/jobs/3726245521
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes http://autobuild.buildroot.net/results/166/1667b4ebd8e16e7d8b47bc3ca128a76daf27b4d9/
The configure script of host-libxml-parser-perl needs the English perl
module on the host:
ERROR from evaluation of
/home/buildroot/autobuild/instance-1/output-1/build/host-libxml-parser-perl-2.46/Expat/Makefile.PL:
Can't locate English.pm in @INC (you may need to install the English module)
(@INC contains:
/home/buildroot/autobuild/instance-1/output-1/build/host-libxml-parser-perl-2.46/inc
/home/buildroot/autobuild/instance-1/output-1/host/lib/perl
/usr/local/lib64/perl5/5.36 /usr/local/share/perl5/5.36
/usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5
/usr/share/perl5 .) at ./Makefile.PL line 3.
So add a check for it in dependencies.sh similar to the existing check for
ExtUtils::MakeMaker.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Running tests with top-level parallel builds can speed up running some
tests, expecially those that have a lot of packages like the systemd
init tests.
Trigger TLPB when the configuration enables per-package directories.
We're using the jlevel argument, which normally is used for BR2_JLEVEL
as the value for calling make -j<N> at the top-level. In fact,
BR2_JLEVEL is "unused" when using TLPB, because the top-level make
acts as the job server that distributes tokens to sub-makes (except
for the few build systems like waf or scons that don't support this),
so it's really the top-level make -j<N> that determines the level of
parallelism, and BR2_JLEVEL doesn't really have an effect.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Thomas: extend explanation a bit]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Start counting the line numbers in 1 instead of 0, in case an error
must be printed.
Both the error about a developer entry with no file entry and the error
about a file entry with no developer entry actually belong to the
non-empty line previous the one being analysed, so in these cases print
the line number from the line before.
Also count empty and comment lines, so a developer fixing the file can
jump to the correct line (or the nearest one).
At same time standardize the messages, printing the line number
also in the case of a warning for a file that is not in the tree
anymore.
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently 4 types of parsing errors/warnings can be found:
- entry for a file that is not in the tree anymore (warning)
- developer entry with no file entry (error)
- file entry with no developer (error)
- entry that is not a developer, a file or a comment (hard error)
Currently only the last one ends the script with -v with error code.
Make all 3 error types into hard errors and bail out at the first error
found, because the rest of the state machine is not designed to handle
malformed input.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a basic module that installs a single file, to check that it is
properly accounted for.
Reported-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thierry Bultel <thierry.bultel@linatsea.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
http://autobuild.buildroot.net/results/5d1/5d10f4f545dccf126e3f5b5efce777a393c5e7bc/http://autobuild.buildroot.net/results/7c2/7c2df31c6eb34b68e460e092d8c262bdc6c8f25a/
The configure script of (host-)libopenssl needs the FindBin perl module on the host:
Can't locate FindBin.pm in @INC (you may need to install the FindBin module)
(@INC contains: /home/buildroot/autobuild/instance-2/output-1/host/lib/perl
/usr/local/lib64/perl5/5.36 /usr/local/share/perl5/5.36
/usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5
/usr/share/perl5) at ./Configure line 15. BEGIN failed--compilation aborted
at ./Configure line 15.
As this is needed for both libopenssl and host-libopenssl (which does not
have a corresponding config symbol in the .config), we have to require it
unconditionally.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit is the result of running
support/scripts/gen-bootlin-toolchains now that 2022.08 toolchains
have been made available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It will be needed by check-package to run checks according to the file
type (the same determined by the command 'file').
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Extend test_check_package to also check the ignore list functionality.
Check:
- the entries in the ignore list use relative path;
- an entry in the ignore list actually ignores the warning;
- an outdated entry in the ignore list generates a warning by its own,
preventing the ignoring list to grow indefinitely.
For this to work, add 3 test fixtures, listing entries for an
pre-existing file in the br2-external used in the test.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This script checks for inconsistencies on symbols declared in Config.in
and used in .mk files.
Currently it checks only symbols following the pattern BR2_\w+ .
The script first gets the list of all files in the repository (using git
ls-files like 'make check-flake8' already do).
Then it parses all relevant files, searching for symbol definitions and
usages, and add entries into a database.
At the end, the database is searched for inconsistencies:
- symbol that is part of "choice" and is referenced with "select";
- legacy symbol being referenced in packages;
- legacy symbol being redefined in packages;
- symbol referenced but not defined;
- symbol defined but not referenced;
- legacy symbol that has a Note stating it is referenced by a package
(for legacy handling) but is referenced in the package without a
comment "# legacy";
- legacy symbol that has a Note stating it is referenced by a package
but it is not actually referenced.
There is also a debug parameter --search that dumps any filename or
symbol entries from the database that matches a regexp.
Sample usages:
$ utils/check-symbols
$ utils/docker-run utils/check-symbols
$ utils/check-symbols --search 'GETTEXT\b|\/openssl'
At same time the script is created:
- add unit tests for it, they can be run using:
utils/docker-run python3 -m pytest -v utils/checksymbolslib/
- add two more GitLab CI jobs: check-symbols (to check current tree
using the script) and check-check-symbols (to check the script against
its unit tests)
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Peter: print warnings to stderr, rename change_current_dir() to
change_to_top_dir()]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following the example of test-pkg config described in commit
"12c7a05da1 utils/test-pkg: add gitlab-ci support" to test a defconfig
fragment that contains a disabled option is currently possible, but
it do requires one to change the git config core.commentChart so the
lines starting with "#" are not discarded by git when creating/editing
the commit message.
For instance, without the indentation the 3rd line below would be
excluded from the commit message when the editor is closed:
test-pkg config:
SOME_OPTION=y
# OTHER_OPTION is not set
SOME_VARIABLE="some value"
Requiring to change git configs is not very nice.
So make the developer's life easier by changing the sed expression to
remove indentation with spaces from a defconfig fragment found on a
commit message.
For instance these lines become valid and generate a defconfig fragment
without the indentation of one space to be tested in GitLab CI:
test-pkg config:
SOME_OPTION=y
# OTHER_OPTION is not set
SOME_VARIABLE="some value"
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When we introduced support for the paranoid check of unsafe libraries
and headers path with commit 4ac8f78d37 (Add option for paranoid
unsafe path checking) back in 2014, we made it optional, as we expected
that would break quite a few packages.
Now, almost 8 years later, we only have three packages that explicitly
reference the option (dillo, gnuradio, and libtalloc), either in a patch
or in their .mk.
The option has been enabled by default since 2016, with 61c8854cef
(toolchain: enable paranoid unsafe path check by default), and that has
not triggered many build failures in a while.
The minimal defconfig used by test-pkg has also had it enabled as of
b6c98b3549 (minimal.config: add BR2_COMPILER_PARANOID_UNSAFE_PATH=y)
in 2017.
It is time to make that globally unconditional now.
There is still a remnant, in our binutils patches. As our toolchain may
get used outside of Buildroot, people may got the expectation that path
poisoning is only a warning, so we keep the current behaviour.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Romain Naour <romain.naour@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Open Fabrics Performance Tests.
This is a collection of tests written over uverbs intended
for use as a performance micro-benchmark. The tests may be
used for HW or SW tuning as well as for functional testing.
https://github.com/linux-rdma/perftest
Tested-by: Shamraiz Ashraf <shamraizashraf092@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
[yann.morin.1998@free.fr
- move all arch-related dependencies to _ARCH_SUPPORTS
- include musl condition in comment and its dependnecies
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is the userspace components for the Linux Kernel's
drivers/infiniband subsystem.
https://github.com/linux-rdma/rdma-core
Tested-by: Shamraiz Ashraf <shamraizashraf092@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
[yann.morin.1998@free.fr:
- select iproute2 as it provides the 'rdma' utility
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d48a8beb39)
[Peter: drop Makefile change]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 8450b76918 (package/pkg-cargo: move CARGO_HOME into DL_DIR)
allowed for a shared cargo cache of crates. Internally, cargo is
supposed to lock themselves when accessing that cache, and that commit
even had some research in that area, pointing at [0] for complaints
about too-coarse the lock, so it was deemed safe to have a shared cargo
home.
However, in practice, the locking as implemented by cargo, fails to
properly protect the concurrent accesses to the crates cache, with random
failures that manifest themselves like so:
Blocking waiting for file lock on package cache
Blocking waiting for file lock on package cache
Downloading crates ...
error: failed to sync
Caused by:
failed to download packages
Caused by:
failed to download `autocfg v1.1.0`
Caused by:
unable to get packages from source
Caused by:
failed to unpack package `autocfg v1.1.0`
Caused by:
failed to unpack entry at `autocfg-1.1.0/src/tests.rs`
Caused by:
No such file or directory (os error 2) while canonicalizing [...]
with the last few errors sometime being:
Caused by:
failed to parse manifest at `[...]/aho-corasick-0.7.18/Cargo.toml`
Caused by:
can't find library `aho_corasick`, rename file to `src/lib.rs` or specify lib.path
So, as we do not systematically use our own cargo build (we can use a
pre-built one with host-rust-bin), we can't patch cargo (even if we knew
what to do!).
Instead, we implement a lock ourselves, by wrapping the call to "cargo
vendor" with a flock(1) on cargo home.
Note: the download wrapper is already flock-ed, but it is a per-package
lock, so it does not prevent different packages from being downloaded in
parallel; if those packages need cargo vendoring, that will not be
protected by the flock on the dl wrapper. So we really do need a flock
on cargo home.
[0] https://github.com/rust-lang/cargo/issues/6930
Fixes: 8450b76918
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Moritz Bitsch <moritz@h6t.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit de4cf25375 (package/{rust, rust-bin}: bump to version 1.66.0)
forgot, despite the big comment above the version strings, to confirm
that the vendoring was still working.
Previously, we were adding the vendoring equivalence manually, but in
commit 04154a6517 (support/download/cargo-post-process: cargo output
for vendor config), we switched to using the output of "cargo vendor"
(on stdout) to support cases were the vendoring equivalence would be
more complex (e.g. when using crates not hosted on crates.io).
With rust until and including 1.65.0, "cargo vendor" would output (for
crates.io crates) the same output as our manual fixups, except it was
preceded by an empty line. So, to avoid recompting all our hashes, we
added a tweak to strip away the leading empty line in 04154a6517.
But rust 1.66.0 includes [0] which changes the output (on stdout) of
"cargo vendor", where the first empty line is no longer emitted.
This means that our tweak for rust 1.65.0 now strips out an important
part of the cargo vendor output, which renders the archives invalid, and
thus generates different archives, which fail to validate against our
hashes.
Fix this by doing what the comment in the post-process helper states,
and just keep the whole output of "cargo vendor", by just removing the
"tail --lines=+2". Since that comment is no longer meaningful, we drop
it too.
Now, all our 6 cargo-based packages, as well as our 5 python packages
that have rust code, can be vendored again, without changing our hashes,
but most importantly, with valid archives.
Still, we keep the comment above the versions strings, in the hope that
a future bumper will notice and be more careful at validating the
vendoring.
[0] https://github.com/rust-lang/cargo/pull/11273
Fixes:
http://autobuild.buildroot.org/results/bea/beac7674bbc9fd2f8777b5861f65afee9c485753/ (bat)
http://autobuild.buildroot.org/results/d1e/d1ec1ebbde115628a4b8b9099544347242a97c1c/ (dust)
http://autobuild.buildroot.org/results/f96/f968be895be9ca98b314fdd688ef8d3bdf4e5dfb/ (hyerfine)
http://autobuild.buildroot.org/results/a0c/a0cdb6cc9493f5248d98f98b13da854e12adc2be/ (ripgrep)
... and so many others...
Reported-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: James Hilliard <james.hilliard1@gmail.com>
Cc: Simon Richter <simon.richter@ptwdosimetry.com>
Reviewed-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Tested-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr:
- select host-cython in Config.in
- introduce obj_path in test sample
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, when asserting that a command succeeded, we just capture the
return code of the command. If that is not zero, the assertion fails,
but the error message is not very splicit:
AssertionError: 1 != 0
Replace the error message with an explicit message that dumps the failed
command, the error code, and the resulting output.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 86d32208b6 (support/testing/tests/init/test_systemd.py: use
downloaded kernel) stopped building a custom kernel for the systemd
tests, but forgot to drop the associated kernel config fragment.
That fragment is now not used in any test case, so we can drop it.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Z3, also known as the Z3 Theorem Prover, is a cross-platform
satisfiability modulo theories (SMT) solver.
https://github.com/Z3Prover/z3
Signed-off-by: Julien Olivain <ju.o@free.fr>
[yann.morin.1998@free.fr:
- python bindings 'depends on' python, not 'select' it
- fix check-package in test_z3.py
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 25680e6aa8)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Compilation of Perl-related packages fails if `PERL_MM_OPT` is defined.
We previously issued an error in this case.
Instead, simply `unexport` the variable.
Signed-off-by: Gleb Mazovetskiy <glex.spb@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Back when support/testing/tests/package/test_gdb was introduced, there
was a significant difference in how gdb < 10 and gdb >= 10 were
handled in gdb.mk, which explained why we were testing both gdb 9.x
and gdb 11.x.
However, support for gdb 9.x has now been dropped, and we only support
gdb >= 10.x, so testing gdb 9.x and 11.x separately no longer make
much sense. In addition:
- other GDB tests in the same file already test the default version,
which is now 11.x, meaning we in fact have duplicated tests between
the ones testing the default version and the ones testing 11.x
specifically
- GDB 9.x has been removed, which means all the tests testing GDB 9.x
are failing, with a Config.in.legacy build error.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3249828456 (TestGdbHostOnly9x)
https://gitlab.com/buildroot.org/buildroot/-/jobs/3249828454 (TestGdbHostGdbserver9x)
https://gitlab.com/buildroot.org/buildroot/-/jobs/3249828451 (TestGdbHostGdbTarget9x)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The CPIO filesystem generated by the test_python_crossbar test is too
large, and doesn't fit as an initramfs in the 256MB of RAM available
in the versatilepb machine. This causes a "Initramfs unpacking failed:
write error" when booting, and many files being missing from the root
filesystem, ultimately causing the test to fail.
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3249828587
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It seems like on Gitlab CI, the runners are quite slow, and the Flask
server does not startup in the 15 seconds we give it. So increase this
to 30 seconds before trying to contact the Flask server.
Hopefully fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3249828594
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Docker compose up outputs terminal control characters intended for
interactive output viewing.
Wget similarly can use the -q option to produce quieter logs.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Docker compose is now invoked as "docker compose" not "docker-compose."
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3249828442
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the output of `cargo vendor` to generate the vendor configuration.
Fixes the need to patch the generated configuration if there are
non-crates.io dependencies.
Note:
`cargo vendor` currently prints a newline before it prints the
needed configuration.
This is fixed in +nightly, will end up in +stable soon and must
be considered when updating cargo.
See: https://github.com/rust-lang/cargo/pull/11273
Until then it is needed to remove this first line to make sure
that the contents of .cargo/config will be the same as they were
generated with the earlier version of the script. Thus, the
hashes of the packages that use this script remain the same.
Signed-off-by: Simon Richter <simon.richter@ptwdosimetry.com>
[yann.morin.1998@free.fr: add comment in rust-bin.mk and rust.mk]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Startig with glibc 2.34, the gconv modules description has been split in
two:
- a common definition in the old location, /usr/lib/gconv/gconv-modules
- specific definitions in a subdirectory, /usr/lib/gconv/gconv-modules.d/
This is done so as to simplify the handling of glibc gconv modules, and
eventually to segregate those outside of glibc, and so that third-parties
may also provide their own gconv converters and their definitions.
And starting with that same glibc version, most of the gconv modules
definitions are moved to an extra configuration file in that
sub-directory.
It is thus no longer possible to use special code pages, like cp850,
which are very useful to access FAT-formatted devices.
Add support for this new gconv layout, while keeping support for older
glibc versions. Note that the modules themselves are not moved or
renamed, just the definition files have changed.
Instead of passing the one old gonv modules definitions file on stdin,
we pass the base directory to that file, and move into the script the
responsibility to find all the gconv definition files.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When only a subset of the glibc gconv modules are installed, we need to
generate a trimmed-down list of available modules. We currently use gawk
for that.
However, we are not using any GNU extension in that awk script, and it
happens to work as expected when using mawk (which has no GNU
extension).
Commit 11c1076db9 (toolchain: add option to copy the gconv libraries)
did not explain why it used gawk explicitly, and given the age for that
commit, we doubt we'd be able to have the involved participants recall
anything from that period...
Besides, gawk is not a requirement for Buildroot.
Switch over to using plain awk.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Newest versions requires a bit more time to finish.
Signed-off-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 25d865996d)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Any .pyc files generated by the pycompile script during target
finalization are currently counted in the "Unknown" package,
because packages-file-list.txt only contains the source .py file.
If a .py file is added to filesdict, add the corresponding .pyc
file as well.
Signed-off-by: Michael Klein <m.klein@mvz-labor-lb.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Polkit has two directories that are used to store rules.
Add the second directory to the existing tests, to ensure
that both work in the future.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Check that dependencies that are DT_NEEDED by a program are
automatically copied by dracut. We use cramfs, the package,
as it is small and just depends on libz.
Test more than one dracut config file.
Reported-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thierry Bultel <thierry.bultel@linatsea.fr>
Cc: Adam Duskett <aduskett@gmail.com>
[Arnout: remove test for features that haven't been merged yet]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Since we do not pivot_root/switch_root from the cpio, whatever we get
in the rootfs was exactly what we got by listing the cpio archive.
Drop the test for the presence of pv, it's redundant.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thierry Bultel <thierry.bultel@linatsea.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Due to a bug in the CodeSourcery ARM toolchain packaging, this
toolchain currently appears as available even for noMMU
configurations, which is obviously wrong. Due to this, the
bootlin-armv7m-uclibc.config fragment ends up using the CodeSourcery
ARM toolchain, which is obviously wrong for an ARM noMMU
configuration, causing a build failure when matching the toolchain
capabilities with the configuration.
Even though we will separately fix the CodeSourcery ARM toolchain
packaging, it makes sense to ensure that the
bootlin-armv7m-uclibc.config fragment explicitly selects the Bootlin
toolchain.
Reported-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This tests valdates that we can publish a message and read it back.
Signed-off-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr:
- don't manually start mosquitto, there's a startup script for that
- don't pass custom timeout
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit bf0d8c9659)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes flake8 errors:
support/scripts/pkg-stats:1013:133: E501 line too long (164 > 132 characters)
support/scripts/pkg-stats:1018:36: F541 f-string is missing placeholders
support/scripts/pkg-stats:1110:199: E261 at least two spaces before inline comment
For the first and the last one, we chose to split the long lines rather
than adding noqa: 501. Indeed, the long lines make it very unreadable,
and there are relatively natural places where the line can be broken.
Also split a line just below the second one in a similar way.
The f-string on 1018 doesn't need to be an f-string.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This is done either by switching to single quoted f-strings, triple
double quoted f-strings when needed, or simply single-quoted strings.
The renderer HTML is exactly identical before/after this commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-By: Sen Hastings <sen@phobosdpl.com>
Acked-By: Sen Hastings <sen@phobosdpl.com>
Within single-quoted f-strings, and within triple double quoted
strings, escaping all the double quotes is completely useless and
makes the code more difficult to read. Get rid of all this useless
escaping.
The renderer HTML is exactly identical before/after this commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-By: Sen Hastings <sen@phobosdpl.com>
Acked-By: Sen Hastings <sen@phobosdpl.com>
The python installer package isn't able to overwrite files of packges
that already exist, this causes problems when doing a rebuild or
update without a full clean.
To fix this we can use functionality from importlib to identify and
remove any conflicting python package files before installation.
We also need to use internals from python-installer, as we want to use
the same logic as pyinstaller uses internally for getting the scheme so
that we ensure we clean the correct package scheme (we want it to be the
same as the one we're installing)
Fixes:
Traceback (most recent call last):
File "/home/buildroot/buildroot/support/scripts/pyinstaller.py", line 69, in <module>
main()
File "/home/buildroot/buildroot/support/scripts/pyinstaller.py", line 61, in main
install(
File "/home/buildroot/buildroot/output/host/lib/python3.10/site-packages/installer/_core.py", line 109, in install
record = destination.write_file(
File "/home/buildroot/buildroot/output/host/lib/python3.10/site-packages/installer/destinations.py", line 207, in write_file
return self.write_to_fs(scheme, path_, stream, is_executable)
File "/home/buildroot/buildroot/output/host/lib/python3.10/site-packages/installer/destinations.py", line 167, in write_to_fs
raise FileExistsError(message)
FileExistsError: File already exists: /home/buildroot/buildroot/output/target/usr/lib/python3.10/site-packages/tinycss2/__init__.py
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Tested-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
[yann.morin.1998@free.fr:
- extend commit log about the use of the installer internals (the
symbols prefixed with '_')
- check path.files against explicitly None
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The python installer cli isn't able to overwrite files of packages
that already exist, this causes problems when doing a rebuild or
update without a full clean.
Since we need to add functionality to our pyinstaller.py script to fix
this issue we must also use pyinstaller.py for host python packages.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Tested-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 7652817c93 updated the
documentation but forgot to update support/dependencies
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
It includes a simple test for the full cpio image, and a test of the
dracut image. To validate that the dracut image is a subset of the full
image, 'pv' is added to the image, and the test verifies that pv is not
part of the image. Note that the real rootfs is not mounted at the
moment, so pv is never available in the running image.
Systemd and other init systems are currently untested.
Signed-off-by: Thierry Bultel <thierry.bultel@linatsea.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The CPIO filesystem generated by the test_python_s3transfer test is
too large, and doesn't fit as an initramfs in the 256MB of RAM
available in the versatilepb machine. This causes a "Initramfs
unpacking failed: write error" when booting, and many files being
missing from the root filesystem, ultimately causing the test to fail.
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884635126
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- drop superfluous# BR2_TARGET_ROOTFS_TAR is not set
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The CPIO filesystem generated by the test_python_botocore test is too
large, and doesn't fit as an initramfs in the 256MB of RAM available
in the versatilepb machine. This causes a "Initramfs unpacking failed:
write error" when booting, and many files being missing from the root
filesystem, ultimately causing the test to fail.
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884635042
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- drop superfluous# BR2_TARGET_ROOTFS_TAR is not set
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The CPIO filesystem generated by the test_python_boto3 test is too
large, and doesn't fit as an initramfs in the 256MB of RAM available
in the versatilepb machine. This causes a "Initramfs unpacking failed:
write error" when booting, and many files being missing from the root
filesystem, ultimately causing the test to fail.
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884635041
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- drop superfluous# BR2_TARGET_ROOTFS_TAR is not set
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In commit
9267b0f14d ("package/f2fs-tools: bump to
version 1.15.0"), f2fs-tools was bumped from 1.14.0 to 1.15.0.
It turns out that this version bump causes the output of dump.f2fs to
slightly change.
In version 1.14.0, it looked like this:
Info: Segments per section = 1
Info: Sections per zone = 1
Info: sector size = 512
Info: total sectors = 262144 (128 MB)
Info: MKFS version
"Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 2022"
Info: FSCK version
from "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
to "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
Info: superblock features = 0 :
Info: superblock encrypt level = 0, salt = 00000000000000000000000000000000
Info: total FS sectors = 262144 (128 MB)
Info: CKPT version = 70c101c3
Info: checkpoint state = 181 : trimmed nat_bits unmount
In version 1.15.0, it looked like this:
Info: MKFS version
"Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 2022"
Info: FSCK version
from "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
to "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
Info: superblock features = 0 :
Info: superblock encrypt level = 0, salt = 00000000000000000000000000000000
Info: Segments per section = 1
Info: Sections per zone = 1
Info: total FS sectors = 262144 (128 MB)
Info: CKPT version = b89f8bb
Info: checkpoint state = 181 : trimmed nat_bits unmount
You will notice that the message "Info: total sectors = 262144 (128
MB)" is no longer present, and only "Info: total FS sectors =
262144 (128 MB)" is not present.
Except our test case was precisely looking for this "Info: total
sectors" string in the output, causing the test to fail.
We fix this by simply matching on "Info: total FS sectors" now.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884634814
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Octave package test can occasionally fail due to timeout while testing
some octave modules. This commit slightly increase the timeout value
to reduce those failures.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit makes sure that the python-crossbar package pulls in the
right dependencies, based on the requirements-min.txt.
It does so by:
- Changing the 0002-Remove-idna-requirement patch by a more thorough
patch that drops all indirect dependencies from
requirements-min.txt, making it easier to have a 1:1 mapping
between lines in requirements-min.txt and Buildroot selects.
- Changing the
0003-crossbar-webservice-wap-use-markupsafe-instead-of-we patch to
update requirements-min.txt to indicate the new MarkupSafe
dependency. Here again, to have a 1:1 mapping between lines in
requirements-min.txt and Buildroot selects.
- Updating the Buildroot selects to match requirements-min.txt, with
relevant comments when it does not.
- Fixing up the Crossbar test case to no longer force autobahn to use
umsgpack. Instead, we now use the default of msgpack that is
expected by autobahn.
Fixes bug #14556, https://bugs.busybox.net/show_bug.cgi?id=14556.
Signed-off-by: Emile Cormier <emile.cormier.jr@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
python-scipy is moving to a meson build infrastructure, and requires
fortran cross-compilation. This commit extends the cross-compilation
configuration file generated for use by meson to add the "fortran",
"fortran_args" and "fortran_link_args" properties.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
construct is a Python library for declarative serialization/
deserialization of structured binary data.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Test the scipy::io module, to demonstrate that runtime dependencies
are correct.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Importing the scipy module in the Python interpreter running in Qemu
takes quite a while on slow machine, so a timeout extension to 30
seconds is needed to make sure the test has the time to run.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This adds an optional linebreak at the vendor attribute in the CPE ID.
It should be noted this is purely for formatting/layout purposes
and does not actually insert any additional characters
(newline or otherwise) into the rendered text.
This means that even though the text renders across two lines,
copy-pasting will still yield one line of text.
example: https://sen-h.github.io/pkg-stats/c245575.html
see also: https://developer.mozilla.org/en-US/docs/Web/HTML/Element/wbr
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Change the test into a characterization test for all warnings and errors
get-developers can return when parsing the DEVELOPERS files.
It will be helpful when changing the behavior of get-developers to bail
out on all syntax checking warnings.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test relies on the OLA Dummy plugin presenting a test device
and port. It starts the daemon, performs few configuration commands,
covers the Python bindings and also test the OLA web interface.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Arnout:
- Indent hash file with two spaces.
- Bump to 1.7.3 to fix build failure with recent GCC.
- Get from github instead of PyPI.
- Add host-meson and host-python-pythran dependencies.
- Properly propagate Config.in dependencies.
- Correct usage of BR2_INSTALL_LIBSTDCPP symbol.
- Remove F77, no longer used.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Guillaume:
- -lnpymath: npymath.ini localization problem
- -lnpyrandom resolution problem
- fix legal-info for latest version LICENSE.txt
- zlib is a scipy::io module runtime requirement
- update serie for scipy 1.8.1 (latest)
]
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
[Thomas:
- add runtime test
- drop dependency on OpenBLAS, which is not needed in a minimal
configuration
- remove PYTHON_SCIPY_NPY_PKG_CONFIG_PATH logic as it is no longer
needed
]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This attempts to re-implement the "sortable_hint" feature without
relying on words. The column headers and CVE expand/contract buttons
change color and cursor style on hover.
If Javascript is enabled:
Just like [PATCH 1/3] more rules are applied to the
generated stylesheet before content is loaded.
If Javascript is disabled:
The headers stay pearly white. :-)
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Sometimes a package can have a lot of CVEs.
Rather than have the CVE cell make a really tall row
(that means you have to scroll a bunch) this collapses the CVE
cell to a fixed size scrollable element with a
sticky button that lets you expand and collapse it.
If Javascript is enabled:
A stylesheet is generated and appended before content rendering,
amending the cells style to have a fixed height and overflow.
Also, the expand/contract button is unhidden.
This means the CVE cells are rendered in a collapsed state
instead of being rendered in an expanded state and then
slamming shut.
This avoids a "flash" and *helps* (vertically at least) manage CLS
(cumulative layout shift).
see: https://web.dev/cls/
If Javascript is disabled:
The cells stay fully open and the expand/contract button stays hidden.
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit c4e6d5c8be (core: implement per-package SDK and target)
introduced leading TABs in that otherwise-space-indented script.
Convert all to spaces, for homogeneity
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Back many years ago, we developed an Eclipse plugin that simplified
the usage of Buildroot toolchains. Enabling the BR2_ECLIPSE_REGISTER=y
was registering the Buildroot toolchain into a special file in your
HOME folder that the Eclipse plugin would recognize to allow to
directly use the Buildroot cross-compiler.
This Eclipse plugin has not been maintained for years. The last commit
in the repository dates back from September 2017. Since then Eclipse
has moved on, and the plugin is no longer compatible with current
versions of Eclipse.
Also, Eclipse is probably no longer that widely used in the embedded
Linux space, as other more modern IDEs have become more popular.
All in all, it's time to say good bye to this Eclipse integration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is a simple test importing pyalsa, showing alsa library version and
attempting to list cards.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It's time to finally switch over globally to the new spacing format
that we have agreed on for the hash file, with 2 spaces as a separator
between fields.
This commit was mechanically generated using:
find . -type f -name '*.hash' | xargs sed -i 's%^md5[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%md5 \1 \2%'
find . -type f -name '*.hash' | xargs sed -i 's%^sha1[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%sha1 \1 \2%'
find . -type f -name '*.hash' | xargs sed -i 's%^sha256[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%sha256 \1 \2%'
find . -type f -name '*.hash' | xargs sed -i 's%^sha512[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%sha512 \1 \2%'
This commit can easily be backported on the LTS branch by re-running
the same commands, if needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 2e399893b4)
[Peter: drop Makefile change]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sortGrid() has been rewritten to dynamically generate stylesheets with
explicit grid-row properties to re-order the rows, instead of removing
and reinserting the cells.
Performance *should* now be comperable to sorttable.js.
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Like all good problems, disparate pieces work together to create
a "synergistically" hairy mess.
The sortGrid() overhaul highlighted a flaw in pkg-stats allowing
for duplicate package class names across rows.
As an example,
boot/barebox/barebox.mk and boot/barebox/barebox/barebox.mk
both get the classname ._barebox and so sortGrid() sticks them on
the same line giving a table with a vestigal row sticking out
of the right side like some kind of appendage.
Also I neglected to add a "_" to the current version column's cells
pkgname class so instead of "._pkgname" we had ".pkgname" and so
the cells were not collected properly as part of the row.
These issues explain the formatting weirdness.
package classnames are now ".path_to_package_makefile" without suffix
(.mk) (so ._boot_barebox_barebox and ._boot_barebox_barebox_barebox
instead of ._barebox) in order to guarantee uniqueness.
and what was *accidentally*
class="centered current_version data .barebox" is now
class="centered current_version data ._boot_barebox_barebox"
just like *all* the other cells in the row. :p
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add four new tests for systemd (rw and ro in each case):
- use dbus-broker instead of the original dbus
- use the original dbus, with dbus-broker installed
The first two extend the existing IfUpDown test cases by just enabling
dbus-broker; the second ones extend this further, by explicitly enabling
the original dbus.
For one of the tests, we overload the test_run() function to test that
the dbus-broker daemon is indeed running as root. We need not replicate
that check in the other dbus-broker-only test, and it does not make
sense to test that in tests that have the original dbus enabled.
Presence of the original dbus and dbus-broker on the same system is
valid: the original dbus is used as the default system bus daemon. We do
not test switching between the two at runtime, though as this is really
too corner-case specific. We just test to ensure the original dbus
system bus daemon is not impacted by the presence of dbus-broker.
Note: the 'full' test-case enables all systemd options, and some of them
do pull the original dbus package, so we can't use that to test the
integration of dbus-broker; instead, we extend the ifupdown case, which
does not enable the original dbus.
The default external toolchain for cortex-A9 is the old ARM toolchain
which has kernel headers 4.10 Since dbus-broker needs toolchain headers
>= 4.17, it can't be selected with this toolchain. Switch the systemd
tests to the Bootlin toolchains instead. We switch all of them to make
things easier. Note that we will need to take care in the future that
the headers version used in the bootlin toolchain doesn't get bigger
than the kernel that is used. The kernel is currently 5.10, the headers
in the bleeding edge bootlin toolchain are 5.4.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The 'rtl8723ds' name, when queried from release-monitoring.org at
https://release-monitoring.org/api/projects/?pattern=rtl8723ds returns
one project, with one "stable_versions" array, which is empty. This
was not expected by the pkg-stats code, causing an exception:
Task exception was never retrieved
future: <Task finished name='Task-764' coro=<check_package_latest_version_get() done, defined at /home/thomas/projets/buildroot/./support/scripts/pkg-stats:558> exception=IndexError('list index out of range')>
Traceback (most recent call last):
File "/home/thomas/projets/buildroot/./support/scripts/pkg-stats", line 566, in check_package_latest_version_get
if await check_package_get_latest_version_by_guess(session, pkg):
File "/home/thomas/projets/buildroot/./support/scripts/pkg-stats", line 544, in check_package_get_latest_version_by_guess
projects[0]['stable_versions'][0],
IndexError: list index out of range
This commit therefore improves the checks done on the results received
from release-monitoring.org to avoid this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Pretty straightforward. Adds my name to copyright notice.
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
CSS classes are generated for each package name for sorting purposes,
However some package names start with a number and this is not allowed.
(see https://www.w3.org/TR/CSS2/syndata.html#value-def-identifier)
Fix is to prepend a character to every class name such as "_".
so every ".package" is now "._package".
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This fixes the .version-needs-update class being overridden by .correct class.
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Somewhere between binutils 2.35 and 2.37, some functionality was
added in readelf to parse more DWARF information. Unfortunately, as
reported in binutils bug
28981 ("https://sourceware.org/bugzilla/show_bug.cgi?id=28981"), this
feature causes a number of fairly scary warnings to be displayed when
running readelf on binaries built with Clang, such as the pre-built
rustc and rustdoc binaries part of the host-rust-bin package. It
looks like this:
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x23
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Bogus end-of-siblings marker detected at offset 2f in .debug_info section
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Bogus end-of-siblings marker detected at offset 10b in .debug_info section
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Bogus end-of-siblings marker detected at offset 10c in .debug_info section
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Further warnings about bogus end-of-sibling markers suppressed
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x23
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x23
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x23
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x23
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: DIE at offset 0x1da refers to abbreviation number 5827 which does not exist
These warnings are caused by the readelf calls done by the
support/scripts/check-host-rpath script. The annoying thing is that
once host-rust-bin has been installed in $(HOST_DIR), this warning
appears after the installation of every single host package, because
support/scripts/check-host-rpath rescans all binaries every time.
To avoid showing those scary warnings, this commit sends the error
output of readelf to /dev/null.
Of course, it would be nicer to only filter out those warnings, but
filtering the error output without merging the error output into the
standard output is tricky, so let's keep things simple. If there is
really an error, readelf will abort.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since systemd requires a relatively new kernel, we switched to a
self-built 4.19.204 kernel. However, since then, the downloaded kernel
used by the tests has been updated to 5.10, which is certainly recent
enough to support systemd. Switch to this one. This reduces the test
time significantly.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The --testcases option of run-tests says how many test cases to build in
parallel. It automatically derives a jlevel from it by dividing the
number of cores + 1 by the number of parallel testcases. However, this
will typically result in a fractional number. Make doesn't like
fractional numbers as argument to -j.
Convert the number to integer (rounding down).
* br2_jlevel is an int, as multiprocessing.cpu_count() is an int, so it
will be always >=2 (cpu_count() raises an error if it can't determine
the number of CPU, so it will always return at least 1);
* args.testcases is an int, and is checked to be >=1
So br2_jlevel + args.testcases is guaranteed to always be bigger
than or equal to args.testcases, and the division thus bigger than 1.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr:
- ensure division provide at least 1
- drop the test below
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The first three lines of all systemd runtime tests are identical, and
they already call into a common function. Therefore, move those lines
into the common function as well.
We need to pass an additional argument for the rootfs type. This changes
the signature, which could create confustion with
InitSystemBase.check_init() that has a different signature. Therefore,
rename the function to check_systemd(). That also allows us to call
self.check_init() directly instead of going through super().
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As for the Buildroot testsuite, multiply every emulator timeout by 10
to avoid sporadic failures in elastic runners.
qemu_arm_vexpress_tz_defconfig tested locally with sucess.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1970084046
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, glibc depends on !BR2_STATIC_LIBS in all the toolchain
variants.
However, for some architectures, glibc is the only supported libc. In
commit 3b3105328e ("Config.in: only
allow BR2_STATIC_LIBS on supported libc/arch"), we implemented a fix
to avoid configurations were BR2_STATIC_LIBS=y with an architecture
already supported by glibc, because these configurations are
impossible. This commit 3b3105328e
prevents from selecting BR2_STATIC_LIBS=y when the C library used for
the internal toolchain backend is glibc.
However, it introduces a discrepency between how this topic is handled
for internal and external toolchains:
- For internal toolchains, we prevent BR2_STATIC_LIBS=y if glibc is
chosen.
- For external toolchains, we allow BR2_STATIC_LIBS=y in all cases,
and it's each glibc toolchain that has !BR2_STATIC_LIBS
This commit addresses this discrepency by preventing BR2_STATIC_LIBS=y
if glibc is chosen in all cases.
Thanks to this, we can remove the !BR2_STATIC_LIBS dependency on both
the glibc package, and all glibc external toolchains.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=14256
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: update to master, fix the gen-bootlin-toolchains script, add
a comment in the static/shared choice to indicate that static is
supported only with uclibc or musl]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
cmp from diffutils is part of the host system requirements, so check
for it. It is used in package/pkg-generic.mk.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit is based on earlier work from Łukasz Stelmach
<l.stelmach@samsung.com> to add support for different page sizes on
ARM64.
In his initial submission, Łukasz took an approach similar to this
one, i.e make it ARM64-specific. Following the feedback on the mailing
list, his second version [1] tried to generalize the logic to
configure the page size between architectures. But the general
consensus during the review process was that there wasn't much to
generalize in the end.
So, this new iteration is back to a simpler approach:
* We have new options in Config.in.arm to configure the page
size. Only 4 KB and 64 KB are supported, because our testing in
Qemu and real hardware has not allowed to get a successful setup
for 16 KB pages. We can always re-add support for 16 KB later if
that is resolved.
* The logic to define the ARCH_TOOLCHAIN_WRAPPER_OPTS options is
moved from the ARC-specific file to arch/arch.mk, and extended to
cover ARM64.
* The appropriate logic in uclibc.mk and linux.mk is added to tweak
the relevant configuration options.
* A test case is added in the runtime test infrastructure to test
building and booting under Qemu a 64 KB configuration, with all 3 C
libraries.
For the regular configuration of 4 KB pages, this commit makes one
functional change: on ARM64, -Wl,-z,max-page-size=4096 is now passed in
the compiler flags of the wrapper.
[1] https://patchwork.ozlabs.org/project/buildroot/list/?series=275452
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When compiling Qt6 applications for the target, CMake needs to have
two variables defined to find the host installation of Qt. These two
variables are unconditionally defined, regardless of whether Qt6 is
enabled in the configuration or not, as they do no harm when Qt6 is
not present/used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: José Pekkarinen <jose.pekkarinen@unikie.com>
[Thomas: add test case, add missing dependencies]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When we use the statistics output to generate a CVE/CPE customer
report showing whether a product is affected by CVEs, we are primarily
interested in whether they are relevant to the target
system. Currently we cannot see if the package is configured for the
build (infra==host) and/or the target system (infra==target).
Therefore this commit extends the pkg-stats script to leverage the
information available in "make show-info" output to tweak the list of
package infrastructures for each package. Thanks to this commit, the
script now has a more consistent behavior:
* When pkg-stats is run without -c, i.e without a defined Buildroot
configuration, it continues to operate as it did, i.e it lists all
package infrastructures supported by the package (such as autotools
host+target, or kconfig target, etc.)
* When pkg-stats is run with -c, i.e with a defined Buildroot
configuration which defines the list of packages that should be
considered, then for each package it now lists only the package
infrastructures used by the package in that current
configuration. For example if you have a package with a host and
target variant, but only the host variant is used in your
configuration, now the pkg-stats output will only say that the host
variant of this package is used;
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[Thomas: pretty much rework the entire implementation and how the
result is presented.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It's been ages (5 years at the next release) that we've not installed
host packages in $(HOST_DIR)/usr, but we still have a few packages that
reference it or install things in there.
Drop all of those in one fell swoop.
The run-time test still succeeds, and the following defconfig, which
should exercise all touched packages [*], does build:
BR2_x86_i686=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_INIT_NONE=y
BR2_SYSTEM_BIN_SH_NONE=y
# BR2_PACKAGE_BUSYBOX is not set
BR2_PACKAGE_GAWK=y
BR2_PACKAGE_GETTEXT=y
BR2_PACKAGE_ABOOTIMG=y
BR2_PACKAGE_DBUS_PYTHON=y
BR2_PACKAGE_OLA=y
BR2_PACKAGE_JIMTCL=y
BR2_PACKAGE_LUA=y
# BR2_PACKAGE_LUA_32BITS is not set
BR2_PACKAGE_ARGPARSE=y
BR2_PACKAGE_PERL=y
BR2_PACKAGE_PHP=y
BR2_PACKAGE_PHP_APCU=y
BR2_PACKAGE_PHP_LUA=y
BR2_PACKAGE_PHP_PAM=y
BR2_PACKAGE_PHP_PECL_DBUS=y
BR2_PACKAGE_PYTHON3=y
BR2_PACKAGE_PYTHON_CRYPTOGRAPHY=y
BR2_PACKAGE_PYTHON_PLY=y
BR2_PACKAGE_PYTHON_PYBIND=y
BR2_PACKAGE_LIBVA=y
BR2_PACKAGE_BIND=y
BR2_PACKAGE_BIND_SERVER=y
BR2_PACKAGE_BIND_TOOLS=y
BR2_PACKAGE_APPARMOR=y
BR2_PACKAGE_APPARMOR_BINUTILS=y
BR2_PACKAGE_APPARMOR_UTILS=y
BR2_PACKAGE_APPARMOR_UTILS_EXTRA=y
BR2_PACKAGE_APPARMOR_PROFILES=y
BR2_PACKAGE_REFPOLICY=y
BR2_PACKAGE_URANDOM_SCRIPTS=y
BR2_PACKAGE_BASH=y
# embiggen-disk to exercise go
BR2_PACKAGE_EMBIGGEN_DISK=y
BR2_TARGET_GRUB2=y
BR2_TARGET_GRUB2_I386_PC=y
BR2_TARGET_GRUB2_I386_EFI=y
[*] exceptions:
- zfs was not tested: it needs a kernel to be built;
- compiler-rt was not tsted: it needs llvm to be built, that takes
ages, and other packages already reference the correct location for
llvm-config, so it was assumed that is OK.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Cc: Anisse Astier <anisse@astier.eu>
Cc: Antoine Tenart <atenart@kernel.org>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Christian Stewart <christian@paral.in>
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Cc: Francois Perrad <francois.perrad@gadz.org>
Cc: Guillaume William Brs <guillaume.bressaix@gmail.com>
Cc: Hervé Codina <herve.codina@bootlin.com>
Cc: James Hilliard <james.hilliard1@gmail.com>
Cc: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Cc: Julien Boibessot <julien.boibessot@armadeus.com>
Cc: Julien Olivain <ju.o@free.fr>
Cc: Matt Weber <matthew.weber@collins.com>
Cc: Nicolas Carrier <nicolas.carrier@orolia.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Vadim Kochan <vadim4j@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
---
Changes v1 -> v2:
- fix new instance that have crept in (Romain)
Commit f1bcb2a45c introduced a number of
flake8 errors. Fix these by:
- adding noqa to the multi-line string containing tabs;
- replacing other tabs with spaces;
- removing space after opening parenthesis;
- splitting the long lines.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit adds four test cases for Grub:
- Grub i386 legacy BIOS
- Grub i386 UEFI
- Grub x86-64 UEFI
- Grub AArch64 UEFI
There is some overlap with the ISO9660 filesystem test cases, some of
which use Grub, but we found it relevant to have separate test cases
for Grub, which were useful to test Grub in non-ISO9660 situations.
The Grub ARM UEFI case is not tested, as it requires Grub to be
chain-loaded by U-Boot. Implementing this test case is left as an
exercise for the reader.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- use EDK2 to build the OVMF blurbs from source, instead of the
binary blobs
- add host-dosfstools
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This migrates pkg-stats.html from html tables to CSS grid, allowing
the use of newer, simpler javascript that is short enough to be
inlined, instead of relying on externally hosted javascript.
Javascript sorting function was rewritten from scratch in ~55 lines,
short enough to be inlined directly in the html.
Tables were redone in CSS grid, but with care taken to mimic existing
"look and feel" of prevous implementation, albeit with slightly
better responsive behavior and default styling characteristics.
Column labels are now "sticky" and stay stuck to the top of the
viewport as you scroll down the page.
Also, css was rewritten in fewer lines and table elements were changed
to divs (for grid support).
Other small misc fixes include quoted hrefs and document language
declarations to make the w3c html validator happy.
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Previously, we used support/scripts/pycompile.py to generate the pyc
files for the python libraries.
While the script worked, it did not follow the PEP 3147 layout
requirements for py+pyc deployments.
Now, use the package's own compileall.py script. This will follow
PEP 3147 guidelines. It also supports "legacy" pyc only deployments as
described here:
https://peps.python.org/pep-3147/#case-4-legacy-pyc-files-and-source-less-imports
With this change, we no longer need to hack support for side-by-side pyc
files because files will be deployed as appropriate.
This also has the added benefit of not requiring python3 on the host to
build host-python3.
Fixes: #14911
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
[yann.morin.1998@free.fr:
- build-tested in a python-less environment
- build+run-tested with the runtime-test infra
]
Tested-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Our current python3 builds only tests the pyc-only case, so add two new
tests, one for py-only and one for py+pyc. For orthogonality, rename the
current test.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that we only have python3, we will never have to test a
python2-based build, so we can drop python2 compatibility
cruft.
In python3, print already is a function, we don't need to
import it from the future.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a runtime test in order to detect undesired changes in behavior of
the get-developers script.
The test uses a .patch file generated against the buildroot tree as a
fixture to check how get-developers operates when called to check it.
The test also overrides the DEVELOPERS file in order to be fully
reproducible and a -d option is added to get-developers in order to
allow this. Since get-developers only looks to already committed
files to compare against patch files, the fixture uses a package that
is very unlikely to be removed from buildroot tree: binutils.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Thomas: extracted from a larger patch from Ricardo, submitted at
https://patchwork.ozlabs.org/project/buildroot/patch/20220528014832.289907-1-ricardo.martincoski@gmail.com/]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that we have a working mechanism to validate the DEVELOPERS file
with the get-developers -v option, let's use it.
This brings back proper validation of the DEVELOPERS file, as
get-developers without argument no longer did any validation following
commit 45aabcddc5 utils/get-developers: really make it callable from
elsewhere than the toplevel directory".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a new rudimentary test inspired by the examples from jmespath's
README file ([1]).
[1]: https://github.com/jmespath/jmespath.py/blob/develop/README.rst
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
[Thomas: add entry in DEVELOPERS file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Many actual tests require network usage, so just import the module to
check that at least that part works.
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
zerofree is a utility which scans the free blocks in an ext2 filesystem
and fills any non-zero blocks with zeroes.
https://frippery.org/uml/
The ext2fs/ext2fs.h header guards the inclusion of <sys/types.h> behind
HAVE_SYS_TYPES_H, which is an autotools-defined macro that is only
supposed to be defined by the package itself, i.e. e2fsprogs, and that
should not leak into installed headers. However, e2fsprogs does leak it,
so we work it around, liek gentoo does.
Tested-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- fix MMU dependency for comment; reword comment
- fix multi-line assignment of ZEROFREE_CFLAGS
- do not add comment trailing after assignment
- extend commit log to explain why we need the workaround
- use TARGET_CONFIGURE_OPTS, drop explicit CC=
- install to explicit destination file
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a simple test to verify that msr-tools are working.
The test needs to build a custom x86_64 kernel with support for CPUID and
MSR.
As the TSC_AUX MSR is emulated on qemu we can use it to test that a value
written with wrmsr can indeed be read back with rdmsr.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a simple compress-uncompress test to verify that pixz is working.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Buildroot documentation section 9.2.1.6 "Additional kernel extensions"
indicates support for kernel extensions defined in external buildroot
trees but unfortunately, there didn't seem to be any support in
br2-external script.
This patch copies 'init' code support to include external kernel
extensions defined in 'linux' dir at the br2-external root directory as
explained in documentation.
Signed-off-by: Nicolas POIROT <ni.poirot@laposte.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds a test case that
1) Builds the complete LLVM and CLANG set of host tools
2) Cross-compiles the compiler-rt runtime using CLANG
3) Builds a cross-compiled application using CLANG and the libfuzzer
compiler-rt library.
4) Executes the fuzz application (part of the libfuzzer package) on
target and checks expected output for a heap-buffer-overflow.
Note: The libfuzzer package is just a tutorial example of how to use
the toolkit provided by llvm (Thus not adding it as a full
Buildroot package).
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Romain Naour <romain.naour@smile.fr>
[Arnout: add Matt to DEVELOPERS]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some packages such as libclc need to override cmake toolchain
variables, to avoid errors caused by trying to set overriden
variables ensure that they are not defined before being set.
This prevents difficult to debug silent dropping of overriden
variables.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As we're about to remove the nds32 architecture support from
Buildroot, drop the toolchain-external-andes-nds32 external toolchain
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This Bootlin toolchain has been available for a while, but was not
supported until now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
These toolchains have been marked obsolete by toolchains.bootlin.com
as they are replaced by the mips64-n32 toolchains. See commit:
121e78806b
Will allow to fix:
http://autobuild.buildroot.net/results/d13b35ba5a0f68f72e6592bdd9218b625a3c6554/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The "arches" dict lists the architectures for which Bootlin toolchains
are available, along with the corresponding Buildroot conditions for
those architecture variants.
However, there is nothing that checks that such architectures really
have Bootlin toolchains available. Even if no toolchain is available,
the architecture is considered as support, and will be listed in the
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARCH_SUPPORTS option, making menuconfig
believe that some Bootlin toolchain is available for the selected
architecture variant.
This is currently the case with the "mips64" architecture (as
identified by the Bootlin toolchains project). Such toolchains have
been made obsolete in toolchains.bootlin.com and replaced by the
mips64-n32 toolchains. But "mips64" is still listed in "arches",
causing this architecture to be considered as having Bootlin
toolchains available.
To avoid this to happen in the future, this commit adds a check that
verifies that an architecture listed in "arches" really has at least
one toolchain available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The microblazeel, microblazebe and openrisc toolchains need to select
this option as they don't have any gdb/gdbserver.
Helps in fixing:
http://autobuild.buildroot.net/results/6315ef7b66ee4ae8f870c92186bc674d65f62f2c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The Bootlin i686 toolchain was already made available only on BR2_i386
with !BR2_x86_i486 && !BR2_x86_i586 && !BR2_x86_1000. However, this
was not sufficient as a few other architecture variants of BR2_i386
are "lower" than i686, and they need to be excluded as well.
Allows to fix:
http://autobuild.buildroot.net/results/56ac1a8fa5b34a9ca10eef98ae9fb090b8c762c4/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The current description of the Bootlin ARM toolchains allows them to
be selected for ARM big endian configurations, which obviously doesn't
work as these Bootlin ARM toolchains are little endian only.
We fix this by adding BR2_arm in the list of conditions for those
toolchains.
Will allow to fix:
http://autobuild.buildroot.net/results/7befbb686bb972016ba4e742976dcdb3fed1be11/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit allows to get a proper description of the dependencies for
the RISC-V 64-bit toolchain, that includes the BR2_USE_MMU dependency.
Fixes:
http://autobuild.buildroot.net/results/d6aee9b275b1ec399aea59758ac8f69fdc5691fc/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We now support both MMU-enabled and MMU-less RISC-V 64-bit
configurations. However, the Bootlin toolchain for RISC-V 64-bit only
supports MMU-enabled configurations, but the current logic in
toolchain/toolchain-external/toolchain-external-bootlin/ does not take
this into account, and allows selecting the Booltin toolchain for
MMU-less RISC-V 64-bit configurations.
To fix this, the gen-bootlin-toolchains script is modified to add the
BR2_USE_MMU dependency to the description of the RISC-V 64-bit
toolchain.
However, the BR2_USE_MMU dependency was also added for glibc and musl
toolchains unconditionally, so to avoid duplicating the dependency, we
now only add it only if not already present in the list of
dependencies for this toolchain.
This will allow to fix:
http://autobuild.buildroot.net/results/d6aee9b275b1ec399aea59758ac8f69fdc5691fc/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The Config.in options created for each toolchain were properly taking
into account the !BR2_STATIC_LIBS dependency of glibc
toolchains. However, this dependency was not taken into account into
the main BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARCH_SUPPORTS
option. Consequently, if an architecture is only supported by glibc,
but BR2_STATIC_LIBS is enabled, the main "Bootlin toolchain" option
was visible... but with no selectable toolchain.
We fix this by making sure that
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARCH_SUPPORTS is only true for all
architectures supported, taking into account the fact that some
architectures can only be supported if !BR2_STATIC_LIBS, when the only
available C library is glibc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some constraints on a setup ended up with a plus sign in the path
for historical reasons and would then fail to match on the comparison
of the host/lib dir match. So, the =~ for bash can be augmented
with a double quote expansion to preserve the literal value of
the characters in the variable.
Example Path: /home/vagrant/test+buildroot/per-package
Signed-off-by: Charles Hardin <ckhardin@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
BR2_TARGET_ROOTFS_OCI_ENTRYPOINT_ARGS option has been
replaced by BR2_TARGET_ROOTFS_OCI_CMD in commit [1].
Since BR2_TARGET_ROOTFS_OCI_ENTRYPOINT_ARGS contains
only one item, we can safely replace by
BR2_TARGET_ROOTFS_OCI_CMD in the defconfig fragment
used by the test_oci test case.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2491321058
[1] 08d65d81d8
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Yann E. MORIN <yann.morin@orange.com>
Cc: Sergio Prado <sergio.prado@e-labworks.com>
Cc: Matthew Weber <matthew.weber@collins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
For the new patch, adding block size options (commit 555f8dfd),
Yann E. MORIN requested updated testcases that specifically ensure
the extreme blocksizes (4K and 1024K) don't cause issues.
This patch splits the current test case in 2, testing with both
block sizes and ensuring the block size was applied in the same
fashion as for the specified compression.
Signed-off-by: Linus Kaschulla <linus@cosmos-ink.net>
[yann.morin.1998@free.fr: keep exisitng test with default size]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
While building the kernel tools, libelf header is missing:
output/TestZfsGlibc/build/linux-5.15.35/tools/objtool/include/objtool/elf.h:10:10: fatal error: gelf.h: No such file or directory
10 | #include <gelf.h>
Select BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF to build host-libelf.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2429014008
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The commit [1] introcuded TestZfsBase as a common function
between all Zfs tests. But TestZfsBase test is executed
as a test itself.
Rename test_run() to base_test_run() to avoid this issue.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2429014006
[1] 593e8cb71f
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As reported by [1], the lxc test is broken since lxc >= 4.0.11.
A patch was added to lxc 4.0.11 to use the new mount api for devpts
setup [2] but the fall back code doesn't work when this new mount
API is not supported. This API was added in kernel 5.6.
(kernel 5.5)
DEBUG conf - conf.c:lxc_setup_devpts_child:1682 - No new devpts instance will be
mounted since no pts devices are required
lxc-start lxc_iperf3 DEBUG conf - conf.c:lxc_setup_dev_console:1966 - Cleared
all (0) mounts from "/dev/console"
lxc-start lxc_iperf3 ERROR mount_utils - mount_utils.c:mount_at:661 - No such
file or directory - Failed to mount "/proc/self/fd/44" to "/proc/self/fd/43"
lxc-start lxc_iperf3 ERROR conf - conf.c:lxc_setup_dev_console:1988 - No such
file or directory - Failed to mount "10(/dev/pts/0)" on "43"
lxc-start lxc_iperf3 ERROR conf - conf.c:lxc_setup_console:2143 - No such file
or directory - Failed to setup console
(kernel 5.6)
lxc-start lxc_iperf3 TRACE mount_utils - mount_utils.c:can_use_mount_api:582 -
Kernel supports mount api
lxc-start lxc_iperf3 TRACE mount_utils - mount_utils.c:move_detached_mount:328
- Attach detached mount 45 to filesystem at 43
lxc-start lxc_iperf3 TRACE conf - conf.c:lxc_setup_dev_console:1990 - Setup
console "/dev/pts/0"
Bump the kernel to the current LTS 5.15.38 version that fully support the
mount API needed by lxc.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2429013708
[1] http://lists.busybox.net/pipermail/buildroot/2022-January/635251.html
[2] be606e16fd
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add TestZfsBase that contains the common parts of the test.
Signed-off-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
GNU Octave is a high-level language, primarily intended for numerical
computations. It provides a convenient command line interface for
solving linear and nonlinear problems numerically, and for performing
other numerical experiments using a language that is mostly compatible
with Matlab. It may also be used as a batch-oriented language. Octave
has extensive tools for solving common numerical linear algebra
problems, finding the roots of nonlinear equations, integrating
ordinary functions, manipulating polynomials, and integrating ordinary
differential and differential-algebraic equations. It is easily
extensible and customizable via user-defined functions written in
Octave's own language, or using dynamically loaded modules written in
C++, C, Fortran, or other languages.
https://www.octave.org/
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Removed 0001-Correct-a-flaw-in-the-Python-3-version-checking.patch
because is already merged.
Select libcurl as required dependency, because keylocation now
supports https. OpenSSL was already a dependency, so libcurl will be
built with https support.
Add upstream patch to support uClibc.
We update the test cases to use the latest LTS kernel, 5.15.x.
Signed-off-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
pkg-stats currently uses the services from support/scripts/cpedb.py to
match the CPE identifiers of packages with the official CPE database.
Unfortunately, the cpedb.py code uses regular ElementTree parsing,
which involves loading the full XML tree into memory. This causes the
pkg-stats process to consume a huge amount of memory:
thomas 1310458 85.2 21.4 3708952 3450164 pts/5 R+ 16:04 0:33 | | \_ python3 ./support/scripts/pkg-stats
So, 3.7 GB of VSZ and 3.4 GB of RSS are used by the pkg-stats
process. This is causing the OOM killer to kick-in on machines with
relatively low memory.
This commit reimplements the XML parsing needed to do the CPE matching
directly in pkg-stats, using the XmlParser functionality of
ElementTree, also called "streaming parsing". Thanks to this, we never
load the entire XML tree in RAM, but only stream it through the
parser, and construct a very simple list of all CPE identifiers. The
max memory consumption of pkg-stats is now:
thomas 1317511 74.2 0.9 381104 152224 pts/5 R+ 16:08 0:17 | | \_ python3 ./support/scripts/pkg-stats
So, 381 MB of VSZ and 152 MB of RSS, which is obviously much better.
The JSON output of pkg-stats for the full package set, before and after
this commit, is exactly identical.
Now, one will probably wonder why this isn't directly changed in
cpedb.py. The reason is simple: cpedb.py is also used by
support/scripts/missing-cpe, which (for now) heavily relies on having
in memory the ElementTree objects, to re-generate a snippet of XML
that allows us to submit to NIST new CPE entries.
So, future work could include one of those two options:
(1) Re-integrate cpedb.py into missing-cpe directly, and live with
two different ways of processing the CPE database.
(2) Rewrite the missing-cpe logic to also be compatible with a
streaming parsing, which would allow this logic to be again
shared between pkg-stats and missing-cpe.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- add missing import of requests
- import CPEDB_URL from cpedb, instead of duplicating it
- fix flake8 errors
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some upstream sites are very slow to respond, and the default timeout
of 300 seconds of the aiohttp.ClientSession() is too long. Let's
reduce it to 15 seconds.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is useful when debugging/developing the pkg-stats script.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is useful when debugging/developing the pkg-stats script.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit adds support for a new type of graph, showing the timeline
of a build. It shows, with one line per package, when each of this
package steps started/ended, and therefore allows to see the
sequencing of the package builds.
For a fully serialized build like we have today, this is not super
useful (except to show that everything is serialized), but it becomes
much more useful in the context of top-level parallel build.
We chose to order the graph by the time-of-configure, as it is the
closest to the actual cascade-style of a true dependency graph, which is
tiny bit more complex to achieve properly. The actual result still looks
pretty good.
The graph-build make target is extended to also generate this new
timeline graph.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- sort by start-of-configure time
- re-use existing colorsets (default or alternate)
- fix python2isms
- fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The check_package_get_latest_version_by_distro() function analyzes the
data returned by release-monitoring.org. For two of our
packages (bento4 and qextserialport), release-monitoring.org returns
something that is a bit odd: it returns an entry with a
"stable_versions" field that contains an empty array. Our code was
ready to have or not have a "stable_versions" entry, but when it is
present, we assumed it was not an empty array. These two packages, for
some reason, break this assumption.
In order to solve this problem, this commit is more careful, and uses
the stable_versions field only if it exists and it has at least one
entry. The code is also reworked as a sequence of "if...elif...else"
to be more readable.
This fixes the following exception when running pkg-stats on the full
package set:
Task exception was never retrieved
future: <Task finished name='Task-10772' coro=<check_package_latest_version_get() done, defined at ./support/scripts/pkg-stats:532> exception=IndexError('list index out of range')>
Traceback (most recent call last):
File "./support/scripts/pkg-stats", line 535, in check_package_latest_version_get
if await check_package_get_latest_version_by_distro(session, pkg):
File "./support/scripts/pkg-stats", line 489, in check_package_get_latest_version_by_distro
version = data['stable_versions'][0] if 'stable_versions' in data else data['version'] if 'version' in data else None
IndexError: list index out of range
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: non-sequence tests as True]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
TestRust and TestRustBin has been introduced at the time when there was
no cargo package infrastructure or any package using rust compiler
(Buildroot 2018.02).
Since then the ripgrep package has been introduced, initially using
the generic package infrastructure and converted later to the cargo
package infrastructure.
Due a recent change in rust/cargo removing the cargo config file [1]
the test TestRust and TestRustBin now fail to compile since they build
an hello-world crate outside of the cargo package infrastructure
without the correct environment for cross-compiling.
Replace the 'hello-world' crate by ripgrep package and check if it
can run properly in Qemu.
Fixes tests.package.test_rust.TestRustBin:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2116202545
But doesn't fixes tests.package.test_rust.TestRust due another bug:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2116202544
[1] b6378631c2
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes https://gitlab.com/buildroot.org/buildroot/-/jobs/2088684091
python sample_python_pyyaml_dec.py
Traceback (most recent call last):
File "/root/sample_python_pyyaml_dec.py", line 5, in <module>
data = yaml.load(serialized)
TypeError: load() missing 1 required positional argument: 'Loader'
yaml.load() requires a loader argument since the move to version 6.0:
https://github.com/yaml/pyyaml/pull/561
The test does not need the extra functionality of load(), so instead move to
the recommended safe_load().
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 471ecea5ee (core/show-info: 'name' only applies to packages)
removed the 'name' field for rootfs (really, for non-package) entries,
thus breaking the pkg-stats processing.
We fix that by excluding any entry that has no 'name', on the assumption
that if it has no name, it is not a package.
Reported-by: Xogium on IRC
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This adds pep517(needed for flit-core to build itself) and flit python
package types.
We need to add an installer script and pass it appropriate options for
installing pep517 wheels generated by python-pypa-build during the
build stage. Unfortunately it seems pep517 does not support builds
without using the wheel format.
We also need to add a patch fixing the version parser in flit-core.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Arnout:
- fix indentation in pkg-python.mk (tabs, not spaces);
- use the new _CMD variables instead of duplicating the entire _CMDS
definitions;
- no need to filter dependencies (they're not self-referencing);
- _NEEDS_HOST_PYTHON no longer exists;
- host-python-pypa-build gets added to DEPENDENCIES automatically.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit add a simple test checking the reported distro name and
id are Buildroot (as reported by /etc/os-release).
Signed-off-by: Julien Olivain <ju.o@free.fr>
[Arnout: drop python2 variant]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The -z option for head was only added in coreutils 8.25, but some older
enterprise-grade distributions (e.g. the oldest still maintained RHEL 7)
only have nothing more recent than coreutils 8.22.
We fix that by using sed to remove everything that starts with the first
NULL byte, \x00.
Signed-off-by: Clayton Shotwell <clayton.shotwell@collins.com>
[yann.morin.1998@free.fr: hex is \xHH, not \xH, reword commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Python2 for the target is about to get removed, so drop the tests using it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
support/testing/tests/package/test_lua_cffi.py:14:1: W391 blank line at end of file
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Allow developers to run check-package for init scripts, that call
shellcheck, without having to install the tool.
Since the docker have a fixed version of the tool, there will be no
difference between runs in different machines.
One can call:
$ utils/docker-run utils/check-package package/package/S*
$ utils/docker-run shellcheck package/package/S*
This change also allows to eventually run check-package for init scripts
in the GitLab CI.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
... so we can catch regressions on check-package.
Update to the new docker image that was pushed after the previous
commit.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
... so the unit tests for check-package can run in the GitLab CI.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
lua-sdl2 is not available on Lua 5.4, so update its test to use Lua 5.3
instead.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some software decides based on uid/gid whether a user is a system or
normal (human) user, with different behaviour for those flavors (example
journald [2]).
So adding logic to create system-users is necessary, we take the now
common ranges from [1].
This extends the mkusers script to allow -2 for uid/gid, this argument
will take an identifier from the user range. All identifiers used up to
now should have been from the system range, so -1 is now interpreted as
a system user/group.
Note that after this commit, all the UIDs and GIDs that are created
automatically (with -1) will change. That means if there is peristent
data on an existing system that was created by such an automatic user,
it will suddenly belong to a different user. However, this could already
happen before: if a USERS line is added to a package, then other UIDs
may change as well.
Add system/user ranges as variables, and the argument for user/system
uid variable as well. Thus some magic constants could be removed, some
further occurences of -1 were replaced with equivalent logic. For
consistency, the existing MIN/MAX_UID/GID variables are renamed to
FIRST/LAST_USER_UID/GID.
Update the documentation with the new automatic ranges.
[1] - https://systemd.io/UIDS-GIDS/
[2] - https://www.freedesktop.org/software/systemd/man/journald.conf.html
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[Arnout: use -1 for system users; refactor the changes a bit]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Removed a few variables, as they were only used to communicate
between the meson package and pkg-meson.mk and are not needed
anymore.
Moved cross-compilation.conf.in out of meson package.
Creating the cross-compilation.conf files for packages is now
using the original template.
To avoid duplicate code, the common sed pattern is stored in
a make variable.
Use explicit Buildroot variables for compiler tools,
and some fixes. (TARGET_LDFLAGS and TARGET_CXXFLAGS
were mixed up with PKG_TARGET_CFLAGS)
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[Arnout: keep PKG_MESON_INSTALL_CROSS_CONF in
TOOLCHAIN_TARGET_FINALIZE_HOOKS]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
