The magic-wormhole "receive" command can output "waiting" messages
when key receival or verification are longer than a predefined
timeout:
https://github.com/magic-wormhole/magic-wormhole/blob/0.13.0/src/wormhole/cli/cmd_receive.py#L135
The intent is to have an interactive user experience.
This behavior makes the runtime test unreliable as the test always
expect the sent message as the exact output. When the test execution
is slower, it sometimes get the "waiting" message instead of the
expected message.
Some test jobs are succeeding:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4968059737
while some other are failing.
magic-wormhole can override those timers with environment variables.
See:
https://github.com/magic-wormhole/magic-wormhole/blob/0.13.0/src/wormhole/cli/cmd_receive.py#L26
This commit sets those environment variable to larger values
(100 seconds instread of 1 by default), to make sure the test will
always pass.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4962923235
Reported-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 3923a4fac8)
[Peter: drop Makefile change]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The intention of this script is to generate the XML that can be sent to
NVD to request a new CPE identifier.
As discussed on the mailing list [0] keeping up with version numbers of
all registered CPE ID won't work.
In addition the feed used to generated the XML files will be retired
[1]. In the future an API needs to be used for fetching the data in
connection with a local database.
All of this works against keeping this script and porting it to the new
API.
As a last blow Matthew, the original author concluded [2]:
> Makes sense to drop it. There never got to be enough momentum in the overall
> software community to make CVE or even the new identifier really accurate.
The intention is to ignore the version part of CPE IDs in the future,
and only look at the version range specified on a CVE. Therefore, a tool
to add new CPE ID versions isn't useful to us. It might still be useful
to have a tool to create the vendor and project parts of a CPE ID.
However, the current gen-missing-cpe tool doesn't support that, and the
API is anyway going to be retired. So there is no reason at all to keep
this around.
Remove gen-missing-cpe and the cpedb module. Remove the Makefile target
to call the script.
Since the cpedb module is removed, the CPEDB_URL definition must be
moved to the place where it is still used, in pkg-stats.
[0]: https://lists.buildroot.org/pipermail/buildroot/2023-August/672620.html
[1]: https://nvd.nist.gov/General/News/change-timeline
[2]: https://lists.buildroot.org/pipermail/buildroot/2023-August/672651.html
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Load sample script support/testing/tests/package/sample_nu.nu onto the
target and verify proper execution by nushell
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Each time a new pipeline is triggered, some jobs may fail due to
temporary issue with a Gitlab runner (network, power supply, docker or
maintainance).
Most of the problems are "runner system failure" [1] and require to
retart each failed jobs manually by maintainers to complete the
pipeline with only real failures if any.
The "retry" keyword allows to configure how many times a job is retried
if it fails. "retry:when" allows to retry a failed job only on
specific failure types like "runner_system_failure".
While at it, retry a job if it failed due to a timeout failure (this
timeout means that the job was pending for more than 24h) [2].
Such timeout failures occur on pipelines testing each Buildroot's
defconfig since there is not enough gitlab runner available to build
all of them within 24h.
Retry only jobs that are more likely to wait for a runner
(generate-gitlab-ci-yml, runtime_test_base, defconfig_base and test_pkg).
[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/4936949397 (runner system failure)
[2] https://gitlab.com/buildroot.org/buildroot/-/jobs/4936949530 (timeout failure or the job got stuck)
https://docs.gitlab.com/ee/ci/yaml/#retrywhen
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The docker image currently contains qemu-system-arm and
qemu-system-x86. Each package contains the 32bit and 64bit variants.
This has been sufficient for the time being.
The RISC-V ecosystem is growing rapidly. It is starting to become
mainstream. To increase the diversity in Buildroot runtime tests,
this commit adds the qemu-system-misc package in the Docker image,
in order to have the commands qemu-system-riscv{32,64}. This package
also contains other architectures (for example: microblaze, nios2,
s390x, xtensa, ...).
For Debian package details, see:
https://packages.debian.org/bullseye/qemu-system-misc
Signed-off-by: Julien Olivain <ju.o@free.fr>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This runtime test was suggested in discussion [1]. It should detect
potential runtime failures such as the one fixed in commit eb74998125
"package/nftables: fix the build of the pyhon bindings".
We need a special kernel, because not all nftables-related options are
enabled in the pre-built one.
[1] https://lists.buildroot.org/pipermail/buildroot/2023-August/672864.html
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Previously, gen-bootlin-toolchains did not add a `depends` guard to
limit the available toolchains based on the minimum required GCC version
for the user selected CPU tuning.
Now, the proper BR2_ARCH_NEEDS_GCC_AT_LEAST_X guard will be added based
on the version of GCC provided by the toolchain.
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
[yann.morin.1998@free.fr: regenerate the toolchain list]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A new version of Bootlin toolchains, 2023.08, has been recently
released. Besides the usual updates of GCC, binutils, GDB, kernel
headers, and C libraries, support for AArch64 BE with musl has been
enabled, which explains why there are two new toolchains and two new
test cases.
All test cases where successfully tested:
https://gitlab.com/tpetazzoni/buildroot/-/pipelines/957304450/builds
Note that the sparcv8 uClibc toolchains are considered obsolete. They
are still available, but at some point we'll have to drop them from the
choice.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This test is a followup of the discussion at:
https://lists.buildroot.org/pipermail/buildroot/2023-July/671639.html
It provides an example of a runtime tests using standard Linux graphic
components (Kernel, DRM, Mesa3D, weston).
Signed-off-by: Julien Olivain <ju.o@free.fr>
[yann.morin.1998@free.fr:
- use an overlay rather than create config file at runtime
- sleep in python not in target
- increase delay to capture DRI CRCs
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 134900401f (support/scripts/fix-rpath: parallelize patching
files) broke the rpath fixup, because it improperly quoted or expanded
variables:
- $@ was expanded in the main() context, rather than in the sub-bash
as expected, propagating incorrect parameters to patch_file();
- an array was passed without array expansion, so only the first item
was passed; that was in turn assigned to a string, anyway loosign
the array. Liuckily, we only ever put a single item in that array,
so that worked by chance.
We fix that by inverting the parameters to patch_elf(), where the extra
args are passed last, so we can put as many we want in the future. We
also pass every variables as positional parameters outside the bash -c
command, which allows us proper quoting of all variables, specifically
of the extra args array which now comes last.
The ultralong line was split, too, in a hopefully easier-to-read form.
Fixing all that also required fixing the many shellcheck issues at the
same time (wome were pre-existing before 134900401f).
While at it, expand two TABs into spaces like the rest of the script.
Note: shellcheck does not seem to warn when a variable expansion will be
used as the command to run, i.e. ${PATCHELF} does not trigger the
quoting error. Still, for consistency, we also double-quote it (we know
it is a single word, as it is already double-quoted once in the script).
Fixes: 134900401f
Cc: Victor Dumas <dumasv.dev@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Using "xargs" instead of "while read" loop allows for the patching of
files to be parallelized. This significantly reduces the amount of
time it takes to fix all the paths. On a larger RFS(~300MB) this
script was taking 5 minutes, it now only takes about 30s on a 12 core
machine.
Signed-off-by: Victor Dumas <dumasv.dev@gmail.com>
[Thomas: take into account the suggestion of Quentin Schulz to pass
PARALLEL_JOBS through the environment down to the fix-rpath script]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Like git which can have submodules, subversion can have externals. The
default behaviour for subversion is to retrieve all the externals,
unless told otherwise.
For some repositories, the externals may be huge (e.g. a dataset or some
assets) and may not be required for building the package. In such a
case, retrieving the externals is both a waste of network bandwitdh and
time, and a waste of disk storage.
Like for git submodules and git lfs, add an option that packages can set
to specify whether they want externals or not.
Since we've so far been retrieving externals, we keep that the default,
and packages can opt-out (rather than the opt-in for git submodules or
git lfs).
We must only set it when the package is actually hosted on svn, to avoid
passing -r when the package is not hosted by svn; otherwise, -r would
also be passed e.g. to a git-hosted package, triggering the download of
git submodules even when they are not requested. We need to do so,
because we have a default value, which we usually do not have in other
download options.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When an svn repository requires credentials, and they are passed
in _DL_OPTS, they must be used also to retrieve the revision date.
One could argue that credentials should not be handled in _DL_OPTS, but
rather that they be fed through other means (e.g. by pre-authenticating
manually once in an interactive session, or by filling them in the usual
~/svn/auth/* mechanisms for a CI).
However, some public facing repositories are using authentication, even
though the credentials are public. This is the case for example for:
http://software.rtcm-ntrip.org/
In such a case, it does make sense to pass credentials via _DL_OPTS,
because they are not really, even really not, secret.
Another use-case (e.g. for a CI) is to pass the credentials as
environment variables, with _DL_OPTS not hard-coded in the .mk file.
However, _DL_OPTS may contain options that are not valid for 'svn info',
as they are meant to be passed to 'svn export' in the first place. Since
the only options common to 'svn info' and 'svn export' are the
credentials, we just extract those and pass them to 'svn info'.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bizarrely enough, the unquoted expansion of ${quiet} does not trigger
any warning from shellcheck, so we do not add any exception for it.
${SVN} can contain more than one item, but we don't care about splitting
on spaces when we just print it for debug, so we can just quote it
rather than add an exception.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A pure python library for creating multi-track MIDI files.
https://github.com/MarkCWirt/MIDIUtil
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
objtool built by the kernel requires libelf
ldd TestSELinuxSystemdExt4/build/linux-6.1.26/tools/objtool/objtool
linux-vdso.so.1
libelf.so.1 => TestSELinuxSystemdExt4/host/lib/libelf.so.1
While updating the kernel used in TestSELinuxSystemd [1] we
forgot to select BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF to provide
Buildroot's host-libelf. Using host-libelf avoid linking with
libelf installed on the host or failing to build objtool if
libelf is not installed.
[1] 60b84fb7ce
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4725186370 (TestSELinuxSystemdSquashfs)
https://gitlab.com/buildroot.org/buildroot/-/jobs/4725186368 (TestSELinuxSystemdExt4)
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test_pixz.py test was initially written as a standalone test.
The commit cf132a13
"support/testing/tests/package/test_compressor_base.py: new helper class"
introduced a helper class for testing data compression programs.
This commit rewrites this test to use this helper class.
The test coverage is mostly the same as before the rewrite. Notable
differences are:
- the test file is slightly smaller for faster testing,
- its content layout also slightly different.
Cc: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Notes: We can't use runtime_test_download job from the parent pipeline
(generate-gitlab-ci) since the artifacts archive size is limited to 5MB.
So introduce a new custom stage named "download" executed before "test"
stage. test-dl directory that contain downloaded files can be an
artifact of the job passed to all jobs of next stages.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4409032417
Runtime tested:
https://gitlab.com/kubu93/buildroot/-/pipelines/934319226
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
"stages" is curently not defined in the .gitlab-ci.yml file,
so the default pipeline stages are:
.pre
build
test
deploy
.post
Since any jobs specify a stage, all jobs are assigned the "test"
stage [1]. All other stages defined by default are not used in the
gitlab-ci pipeline, they remain hidden.
In order to introduce a new custom stage, add the "test" stage
explicitely.
[1] https://docs.gitlab.com/ee/ci/yaml/#stages
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, emulator builtin binaries are downloaded after the rootfs
build by each tests running the emulator (Qemu) on armv5 or armv7.
Due to download quota on the server hosting theses binaries [1]
some GitLab jobs are failing due to "Connection reset by peer" [2]:
ConnectionResetError: [Errno 104] Connection reset by peer
In a follow up commit, we'll add the possibility to download only once
all emulator builtin binaries to pass them as build artifacts.
As such, we will need to make sure that run-tests only download theses
binaries, and that it does not run the testsuite.
Add such a mode, with a new option, --prepare-only.
[1] http://autobuild.buildroot.net/artefacts
[2] https://gitlab.com/buildroot.org/buildroot/-/jobs/4409032417
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
http://autobuild.buildroot.net/results/b85/b85b64162b3889d96c713030b46401e3e0a9a4e2/http://autobuild.buildroot.net/results/fea/fea92e9c2a87a317675a7d0610c2ee467a373b69/
Since the bump to 3.0.9 with buildroot commit
3c66f65a6a the configure script of
(host-)libopenssl needs the FindBin perl module on the host:
Can't locate IPC/Cmd.pm in @INC (you may need to install the IPC::Cmd
module) (@INC contains: /home/buildroot/autobuild/instance-1/output-1/
build/host-libopenssl-3.0.9/util/perl /home/buildroot/autobuild/instance
-1/output-1/host/lib/perl /usr/local/lib64/perl5/5.36 /usr/local/share/
perl5/5.36 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl
/usr/lib64/perl5 /usr/share/perl5 /home/buildroot/autobuild/instance-1/
output-1/build/host-libopenssl-3.0.9/external/perl/Text-Template-1.56/
lib) at /home/buildroot/autobuild/instance-1/output-1/build/host-lib
openssl-3.0.9/util/perl/OpenSSL/config.pm line 19.
BEGIN failed--compilation aborted at /home/buildroot/autobuild/instance
-1/output-1/build/host-libopenssl-3.0.9/util/perl/OpenSSL/config.pm line
19.
As this is needed for both libopenssl and host-libopenssl (which does not
have a corresponding config symbol in the .config), we have to require it
unconditionally.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7814dbce15)
[Peter: drop Makefile update]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
support/testing/tests/package/test_shadow.py:3:1: F401 'infra.basetest.BASIC_TOOLCHAIN_CONFIG' imported but unused
Reported by https://gitlab.com/buildroot.org/buildroot/-/jobs/4643484762.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The base configuration now provide a glibc toolchain,
we can safely switch to it.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The base configuration now provide a glibc toolchain,
we can safely switch to it.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The base configuration now provide a glibc toolchain,
we can safely switch to it.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The base configuration now provide a glibc toolchain,
we can safely switch to it.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The base configuration now provide a glibc toolchain,
we can safely switch to it.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The base configuration now provide a glibc toolchain,
we can safely switch to it.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The base configuration now provide a glibc toolchain,
we can safely switch to it.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The base configuration now provide a glibc toolchain,
we can safely switch to it.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While at it remove Glibc from the test name since all Timezone
now use a Glibc toolchain.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The base configuration now provide a glibc toolchain,
we can safely switch to it.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The base configuration now provide a glibc toolchain,
we can safely switch to it.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch updates the default toolchain used for runtime tests. The
last time this toolchain was updated was in commit
0207a65323 3 years ago. Since then,
multiple things have changed:
Firstly, it used uclibc-ng as the libc whereas since commit
4057e36ca9, glibc is used as the default
library.
And secondly, since commit 531b2a10cd, buildroot
dropped the support for gcc 8 and it cannot be built internally anymore.
So the testsuite was executed using a toolchain that can't be built by
the Buildroot internal toolchain backend anymore.
This new Bootlin toolchain stable 2022.08-1 is based on gcc 11.3.0,
linux headers 4.9.327, glibc 2.35 and binutils 2.38.
The previous toolchain bleeding edge 2018.11-1 is based on gcc 8.2.0,
linux headers 4.14.80, uclibc 1.0.30 and binutils 2.31.1
Nowadays Bootlin toolchains are packaged in Buildroot and we can
directly select them from BASIC_TOOLCHAIN_CONFIG and avoid
setting the toolchain parameters (BR2_TOOLCHAIN_EXTERNAL_CUSTOM...).
The switch to Glibc requires to update some tests for the following
reasons:
- TestPython3Py, TestPython3Pyc and TestPython3PyPyc has been updated
since they use the libc binary file name in their test
(uClibc: libc.so.1 vs Glibc: libc.so.6).
- TestTmux needs at least one locale to pass (as stated in tmux help
text "tmux needs a working UTF-8 locale"), so use "C.UTF-8".
- TestOpenSsh needs a toolchain >= 5.x due to a openssh issue
(Similar to: https://bugs.busybox.net/show_bug.cgi?id=13671)
Use the Bootlin toolchain bleeding-edge 2022.08-1 rhat provide
kernel headers 5.4
- TestShadow needs a toolchain >= 4.14
Use the Bootlin toolchain bleeding-edge 2022.08-1 rhat provide
kernel headers 5.4
Runtime tested on the gcc farm server.
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We are going to update the toolchain used by the Buildroot testsuite
and this update will break the kernel build with the Bootlin stable
toolchain due to an latent issue.
Fixes:
arch/x86/entry/thunk_64.o: warning: objtool: missing symbol table
make[4]: *** [scripts/Makefile.build:361: arch/x86/entry/thunk_64.o] Error 1
make[4]: *** Deleting file 'arch/x86/entry/thunk_64.o'
make[4]: *** Waiting for unfinished jobs....
[fixed since kernel 6.0]
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=de979c83574abf6e78f3fa65b716515c91b2613d
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We are going to update the toolchain used by the Buildroot testsuite
and this update will increase the size of the rootfs over 120M.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We are going to update the toolchain used by the Buildroot testsuite
and this update will increase the size of the rootfs over 120M.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We are going to update the toolchain used by the Buildroot testsuite
and this update will increase the size of the rootfs over 120M.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This new Bootlin toolchain stable 2022.08-1 is based on gcc 11.3.0,
linux headers 4.9.327, glibc 2.35 and binutils 2.38.
Nowadays Bootlin toolchains are packaged in Buildroot and we can
directly select them from BASIC_TOOLCHAIN_CONFIG and avoid
setting the toolchain parameters (BR2_TOOLCHAIN_EXTERNAL_CUSTOM...).
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The kernel 6.1.x is the latest LTS version.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Following the toolchain-external-arm-aarch64 bump to version 12.2-rel1
by commit [1], binutils 2.39 is now provided by the toolchain.
This new binutils version break the ATF build due to new linker warnings as
reported by the EDK2 test:
ld.bfd: warning: bl2.elf has a LOAD segment with RWX permissions
From [2]
"Users of GNU ld (BPF) from binutils 2.39+ will observe multiple instaces
of a new warning when linking the bl*.elf in the form:
ld.bfd: warning: stm32mp1_helper.o: missing .note.GNU-stack section implies executable stack
ld.bfd: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
ld.bfd: warning: bl2.elf has a LOAD segment with RWX permissions
ld.bfd: warning: bl32.elf has a LOAD segment with RWX permissions
These new warnings are enbaled by default to secure elf binaries:
- https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
- https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=0d38576a34ec64a1b4500c9277a8e9d0f07e6774
"
Bump the ATF custom version to 2.9 for binutils 2.39+ support.
[1] 90404e84c1
[2] 1f49db5f25
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4581325484
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a helper class providing a template for testing data
compressor and decompressor programs such as gzip, bzip2, xz...
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Python-docker needs a working docker setup to do anything useful, so add it
to the existing docker_compose (which tests docker and docker-compose)
rather than adding a completely new test.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages (e.g. libjxl) requires a quite recent cmake version,
that is not yet available in most distributions, especially those
LTS versions.
Currently, when we bump the minimum cmake version we require, it gets
bumped for all packages, regardless of their own minimum required
version, which means that a given configuration will trigger the
build of our host-cmake even if the packages that require it are not
enabled and those that are would be content with the system-provided
cmake.
Since host-cmake can take quite some time to build, this can get a
bit annoying to pay the price of a host-cmake build that would
otherwise not be needed.
Some packages even use an alternative build system when available
since they requires a more recent version of cmake than the our
minimum cmake version
(wpewebkit use Ninja: 78d499409f).
We introduce config options that packages can select to indicate
what minimal cmake version they require, and use that version as the
required minimal version required by the current configuration [0].
We would like to ensure that the currently selected minimum cmake
version is indeed lower (or equal) to the cmake version we package,
but that is not possible: dependencies.mk is parsed before we parse
packages, so we do not yet know the cmake version we have, and we
can't invert the parsing order as we need to know the required
dependencies before we parse packages (so that we can build their
dependency rules in Makefile). So we can only add comments in both
places, that refer to the other location.
[0] note that this is yet not optimal, as in such a case, host-cmake
would be in the dependency chain of all cmake-based packages, even
for those packages that do not require it. The optimum would be for
each package to gain such a dependency on an as-needed basis, but
this is by far more complex to achieve, and would only speed up
cases where a single package is built from scratch (e.g. with:
make clean; make foo), which is not worth optimising (yet?)
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Julien Olivain <ju.o@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Artefact (British) and Artifact (American) are both valid spelling
but ARTIFACTS_URL is used in the emulator code.
Surprisingly, the url actually use "artefacts"
http://autobuild.buildroot.net/artefacts
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The commit f69c972ae6 (support/testing/tests/package/test_kexec.py:
new runtime test) was tested locally with a qemu version (>= 7.x) more
recent than the one available in our buidroot/base Docker image (5.2).
As a consequence, that test fails to run in gitlab-ci as reported by [1].
Remove "dtb-kaslr-seed=off" from the Qemu command line and pass
a custom devicetree to qemu virt machine. This devicetree is
based on qemu aarch64 5.2 dts with kaslr-seed set 0.
The qemu aarch64 devicetree has been exported [2] and updated with the
following method:
qemu-system-aarch64 -machine virt -machine dumpdtb=qemu-aarch64-virt-5.2-machine.dtb
dtc -I dtb qemu-aarch64-virt-5.2-machine.dtb > qemu-aarch64-virt-5.2-machine.dts
edit the dts and replace kaslr-seed parameter by "kaslr-seed = <0 0>;"
As soon as our buidroot/base Docker image is updated and a newer qemu version
is available, we can safely revert this change and use the initial method.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4322819092
[1] http://lists.busybox.net/pipermail/buildroot/2023-May/668091.html
[2] https://u-boot.readthedocs.io/en/latest/develop/devicetree/dt_qemu.html#obtaining-the-qemu-devicetree
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Signed-off-by: Julien Olivain <ju.o@free.fr>
Tested-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The br-arm-internal-glibc.config used to be generally used as a configuration
to test the bleeding edge versions of components. However, it has been
lagging behind somewhat and produce invalid configuration since binutils 2.36
removal in d08639e6b9e5... so let's bring it up-to-date:
- Binutils 2.39.x
- GCC 12.x
Since Buildroot 2022.02, the autobuilders doesn't use the csv file anymore
but the test-pkg script still use it.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With the current python-botocore version, the test times out on
machines on which it was passing with previous versions. Increase the
timeout so that the test can be run without using a timeout
multiplier.
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
For various reasons, like debugging or compliance, it is important to
identify what br2-external trees versions were used for a specific
build.
Add a Kconfig option that contains the version as computed by
support/scripts/setlocalversion; this will appear in the .config file
(but not in defconfig files, which is what we want).
Also generate that variable on the .mk side, so that it gets properly
exported in the environment, for post-build of post-iamge scripts to use
as they see fit (like, ensuring there is no dirtyness when in a CI for
example).
Reported-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, the list of external trees is a private variable, but for
debugging or compliance, one may need to get that list.
Add a Kconfig option so that the list appears in the .config file, and
export the already existing .mk variable in the environment, so that
post-build or post-image scripts can use it.
Reported-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 8025cfad10)
[Peter: drop Makefile hunk]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 2dff6e93ca (package/readline: add upstream patch to fix crash
with invalid locale specification) fixed a regression in readline 8.2
[0], that could have been caught with a runtime test. readline is a
library, so we need an executable that exercises readline.
Since readline and bash are developped in tandem [1], it is only logical
to use bash to test readline.
Add a new runtime test for bash, that checks that we can indeed run an
interactive shell, and that an non-existing locale does not cause the
dreaded segfault. We do not use the default configuration, because it
uses a uclibc toolchain, and we want to reproduce against a glibc one.
[0] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1021109
[1] https://tiswww.case.edu/php/chet/readline/rltop.html#Bugs
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The past participle for "to fix" is "fix". The "did you forget" got
eluded into "forget", so again a past participle.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Teach check-package to detect python files by type and check them using
flake8.
Do not use subprocess to call 'python3 -m flake8' in order to avoid too
many spawned shells, which in its turn would slow down the check for
multiple files. (make check-package takes twice the time using a shell
for each flake8 call, when compared of importing the main application)
Expand the runtime test and the unit tests for check-package.
Remove check-flake8 from the makefile and also from the GitLab CI
because the exact same checks become part of check-package.
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Arnout: add a comment to x-python to explain its purpose]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Provides python interface to database stored in hwdata
package. It allows you to get human readable description of
USB and PCI devices.
https://github.com/xsuchy/python-hwdata
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
support/testing/tests/package/test_shadow.py:55:1: W391 blank line at end of file
1 W391 blank line at end of file
make: *** [Makefile:1253: check-flake8] Error 123
https://gitlab.com/buildroot.org/buildroot/-/jobs/3918132888
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The kernel config board/qemu/aarch64-sbsa/linux.config has never been in
use by qemu_aarch64_sbsa_defconfig, neither via
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE, nor via
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES.
test_edk2.py is using the kernel config
board/qemu/aarch64-sbsa/linux.config. However, storing a kernel config
that is not used by qemu_aarch64_sbsa_defconfig, in a directory that is
"owned" by qemu_aarch64_sbsa_defconfig, is bound to cause confusion.
Therefore, move the config file to a new subdirectory:
support/testing/tests/boot/test_edk2/
This is similar to how e.g. test_grub.py has a subdirectory:
support/testing/tests/boot/test_grub/
where it keeps the kernel config that is only used by test_grub.py.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ace needs FileHandle module:
Can't locate FileHandle.pm in @INC (you may need to install the FileHandle module) (@INC contains: /home/buildroot/autobuild/instance-0/output-1/host/lib/perl /usr/local/lib64/perl5/5.36 /usr/local/share/perl5/5.36 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5) at /home/buildroot/autobuild/instance-0/output-1/build/ace-7.0.6/MPC/prj_install.pl line 17.
BEGIN failed--compilation aborted at /home/buildroot/autobuild/instance-0/output-1/build/ace-7.0.6/MPC/prj_install.pl line 17.
Fixes:
- http://autobuild.buildroot.org/results/9dee7c09fd7b41d276df0285a0f3dcae1a71f041
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 71ddf1a084)
[Peter: drop Makefile change]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure:
Can't locate object method "hexhash" via package "MD5" at utils/git-testament.pl line 47
Fixes:
- http://autobuild.buildroot.org/results/3dddcbbe7f6ecae5a2db6fac11fb659719452f73
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
shadow provides utilities to deal with user accounts.
The shadow package includes the necessary programs for converting UNIX
password files to the shadow password format, plus programs for managing
user and group accounts. Especially it is useful if rootless podman
container should be used, which requires newuidmap and newgidmap.
Co-authored-by: Nicolas Carrier <Nicolas.Carrier@orolia.com>
[Nicolas.Carrier@orolia.com provided the test case]
Signed-off-by: Raphael Pavlidis <raphael.pavlidis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
I do constantly get mails that fluent-bit fails to build for s390x.
So added this to ensure that the s390x architecture is checked as well
if I manually do:
$ ./utils/test-pkg -p fluent-bit -a
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libjxl is the reference implementation of JPEG XL (encoder and decoder).
https://github.com/libjxl/libjxl
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Highway is a C++ library that provides portable SIMD/vector intrinsics.
https://github.com/google/highway
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 04154a6517 (support/download/cargo-post-process: cargo
output for vendor config), we switched away from our hand-crafted
cargo.toml mangling, to use cargo itself to update that file.
In doing so, we enabled the shell pipefail option, so that we could
catch cargo failures, while redirecting its output through tee to the
cargo.toml.
However, pipefail is overzealous, and will hit us even for pipes we do
not want to globally fail, like the one that actually checks whether an
archive is already vendored or not:
if tar tf "${output}" | grep -q "^[^/]*/VENDOR" ; then
...
with pipefail, the above may always fail:
- if the tarball is already vendored, grep will exit on the first
match because of -q (it only needs a single match to decide that its
return code will be zero), so the | will get closed, and tar may
get -EPIPE before it had a chance to finish listing the archive, and
thus would terminate in error;
- if the tarball is not vendored, grep will exit in error.
It turns out that the tee was only added so that we could see the
messages emitted by cargo, and still fill the cargo.tom with the output
of cargo.
But that's a bit overkill: the cargo messages are going to stderr, and
the blurb to add to cargo.toml to stdout, so we just need to redirect
stdout.
Yes, we do not see what cargo added to cargo.toml, but that is not so
interesting.
Still, cargo ends its messages with a suggestion for the user to modify
cargo.toml, with:
To use vendored sources, add this to your .cargo/config.toml for this project:
But since we've already redirected that to cargo.toml, there is nothing
for the user to edit, so the above can get confusing. Emit a little
blurb that states that everything is under control.
And then we can drop pipefail.
Note: the go-post-process initially had pipefail too, but it was dropped
in bfd1a31d0e (support/download/go-post-process: drop -o pipefail) as
it was causing spurious breakage when extracting the archive before
vendoring, so it is only reasonable that we also remove it from the
cargo-post-process.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Simon Richter <simon.richter@ptwdosimetry.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/12a/12a63ae177fe3ed0c9a1ef2fa01870f334f36b0f/
Currently, when the post-process helper fails while downloading from
upstream, there is no fallback to the backup mirror.
In case the post-process helper fails, we must consider that to be a
download failure, so we must bail out as if the download backend itself
did fail, but we fail to do so.
Duplicate the logic we have for the download helper: if the post-process
helper fails, remove the downloaded stuff, and continue on to the next
URI, which will ultimately hit the backup mirror (if one has been
configured).
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/820/820e98b1c126469b1f180f078d102ded43b9c40e/
scripts/Makefile.am of mosh-1.4.0 needs the perl diagnostics module on the host:
make[3]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/mosh-1.4.0/scripts'
perl -Mdiagnostics -c ./mosh.pl
Can't locate diagnostics.pm in @INC (you may need to install the diagnostics module) (@INC contains: /home/buildroot/autobuild/instance-2/output-1/host/lib/perl /usr/local/lib64/perl5/5.36 /usr/local/share/perl5/5.36 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5).
BEGIN failed--compilation aborted.
So add a check for it in dependencies.sh similar to the other perl modules.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds two new test cases:
- TestNodeJSBasic which builds a target configuration with just
NodeJS enabled, and which runs a very simple NodeJS script on the
target.
- TestNodeJSModule, which builds a target configuration with NodeJS
enabled + the installation of one extra module, which means npm on
the host (from host-nodejs) is used, and which runs a very simple
NodeJS script on the target that uses this extra module.
Having both tests separately allows to validate that both nodejs-only
and nodejs+host-nodejs configurations behave correctly, at least in
minimal scenarios.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently only SysV init scripts are checked using shellcheck and a few
other rules (e.g. variable naming, file naming).
Extend the check using shellcheck to all shell scripts in the tree.
This is actually limited to the list of directories that check-package
knows that can check, but that list can be expanded later.
In order to apply the check to all shell scripts, use python3-magic to
determine the file type. Unfortunately, there are two different python
modules called "magic". Support both by detecting which one is installed
and defining get_filetype accordingly.
Keep testing first for name pattern, and only in the case there is no
match, check the file type. This ensures, for instance, that SysV
init scripts follow specific rules.
Apply these checks for shell scripts:
- shellcheck;
- trailing space;
- consecutive empty lines;
- empty last line on file;
- newline at end of file.
Update the list of ignored warnings.
Do not add unit tests since no function was added, they were just
reused.
But expand the runtime test for check-package using as fixture a file
that generates a shellcheck warning.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Arnout: support both variants of the "magic" module]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The go vendoring fails on CentOS 7 (which uses git 1.8.3.1) with errors
related to shallow clones:
make docker-compose-source
..
go: downloading github.com/matttproud/golang_protobuf_extensions v1.0.4
github.com/docker/compose/v2/pkg/mocks imports
github.com/theupdateframework/notary/client imports
github.com/docker/go/canonical/json: github.com/docker/go@v1.5.1-1.0.20160303222718-d30aec9fd63c: invalid pseudo-version: git fetch --unshallow -f origin in /home/jacmet/source/buildroot-mirror/output/host/share/go-path/pkg/mod/cache/vcs/48fbd2dfabec81f4c93170677bfc89087d4bec07a2d08f6ca5ce3d17962677ee: exit status 128:
fatal: git fetch-pack: expected shallow list
make[1]: *** [/home/jacmet/source/buildroot-mirror/output/build/docker-compose-2.15.1/.stamp_downloaded] Error 1
It works with git 2.0.0 (released May 2014, included in Debian 8), so check
for >= 2.0.0 with logic similar to the GNU patch version check.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When gitlab prepares a job to run, it checks out the repository with a
non-root user, and spawns a container that runs as root, with some UID
mapping that makes the files be owned by root in the container. However,
our pipelines run as a nont-root user.
Commit bde165f7ad (.gitlab-ci.yml: update Docker image to use) updated
the docker image that is used to run in our pipelines.
That new image includes a git version that is stricter about the
ownership of the git tree it is acting in: git aborts in error when the
user running it does not own the repository.
We use `git ls-tree` quite a lot in our check-{flake8,package,symbols}
rules, so they all fail (in various ways).
To fix this, we either need to fix the ownership or tell git to ignore
the situation.
It is most probably impossible to change the ownership of the files: we
run as non-root,and the files belong to root (in the container). So
we're stuck.
The alternative, is to do as git suggest, and tell it to ignore the
situation. In a local setup, this would be very insecure, but in the
pipelines, this is in a throw-away container, where a single user exists
and is running, so we don't care much (if at all).
Add a global before_script that registers the git config to ignore
ownership issues in the buildroot repository; see [0] for the definition
of the CI_PROJECT_DIR variable. Note: unlike what is said in there, and
in [1], the value actually seen in CI_PROJECT_DIR is already prefixed
with CI_BUILDS_DIR (the documentation is unclear about that point).
[0] https://docs.gitlab.com/ee/ci/variables/predefined_variables.html
[1] https://docs.gitlab.com/runner/configuration/advanced-configuration.html#the-runners-section
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When gitlab prepares a job to run, it checks out the repository with a
non-root user, and spawns a container that runs as root, with some UID
mapping that makes the files be owned by root in the
container. However, our pipelines run as a nont-root user.
Commit bde165f7ad (.gitlab-ci.yml: update Docker image to use) updated
the docker image that is used to run in our pipelines.
That new image includes a git version that is stricter about the
ownership of the git tree it is acting in: git aborts in error when the
user running it does not own the repository.
We use `git ls-tree` quite a lot in our check-{flake8,package,symbols}
rules, so they all fail (in various ways).
To fix this, we either need to fix the ownership or tell git to ignore
the situation. In either case, we'll need to run a scriptlet before all
our jobs.
Gitlab-ci allows to provide a global before_script, that is inherited by
all jobs. However, some of our jobs already declare a before_script, and
that would shadow the global before_script.
There is no technical reason to do our before_script separately from
the actual script, so we move the code from the before_scripts to the
corresponding scripts.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The gcc plugin test was not using the -q option to grep causing it to print
the line to stdout, so fix that.
While we're at it, adjust the locale check to use grep -q instead of
redirecting to /dev/null for consistency with the other checks.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
snapshot.debian.org is notoriously slow, and quite often leads to
timeouts when downloading packages. To give us a better chance of
succeeding, let's retry 3 times before failing.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
SPAKE2 password-authenticated key exchange (in pure python).
This library implements the SPAKE2 password-authenticated key
exchange ("PAKE") algorithm. This allows two parties, who share a
weak password, to safely derive a strong shared secret (and
therefore build an encrypted+authenticated channel).
https://github.com/warner/python-spake2
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 4cdd99190e (support/dependencies/dependencies.sh: require open perl
package for libxcrypt) added a check for the "open" perl module for
libxcrypt, but it does not work as "open" cannot be directly used with
"require" as an argument is needed:
perl -e "require open"
Not enough arguments for open at -e line 1, at EOF
Execution of -e aborted due to compilation errors.
So special case the check to instead check with "use open ':std'".
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/16c/16cba783be11cc5024f9c56bb0a7abb0acf13ef8/
The configure script of libxcrypt needs the open perl module on the host:
Can't locate open.pm in @INC (you may need to install the open module) (@INC
contains: /home/buildroot/autobuild/instance-2/output-1/host/lib/perl
/usr/local/lib64/perl5/5.36 /usr/local/share/perl5/5.36
/usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5
/usr/share/perl5) at ./build-aux/scripts/expand-selected-hashes line 20.
So add a check for it in dependencies.sh similar to how it is done for mpv.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit d631615eb1 (support/testing: test check-package ignore list) added
a too long line causing the check-flake8 target to fail:
support/testing/tests/utils/test_check_package.py:233:133:
E501 line too long (138 > 132 characters)
https://gitlab.com/buildroot.org/buildroot/-/jobs/3726245521
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes http://autobuild.buildroot.net/results/166/1667b4ebd8e16e7d8b47bc3ca128a76daf27b4d9/
The configure script of host-libxml-parser-perl needs the English perl
module on the host:
ERROR from evaluation of
/home/buildroot/autobuild/instance-1/output-1/build/host-libxml-parser-perl-2.46/Expat/Makefile.PL:
Can't locate English.pm in @INC (you may need to install the English module)
(@INC contains:
/home/buildroot/autobuild/instance-1/output-1/build/host-libxml-parser-perl-2.46/inc
/home/buildroot/autobuild/instance-1/output-1/host/lib/perl
/usr/local/lib64/perl5/5.36 /usr/local/share/perl5/5.36
/usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5
/usr/share/perl5 .) at ./Makefile.PL line 3.
So add a check for it in dependencies.sh similar to the existing check for
ExtUtils::MakeMaker.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Running tests with top-level parallel builds can speed up running some
tests, expecially those that have a lot of packages like the systemd
init tests.
Trigger TLPB when the configuration enables per-package directories.
We're using the jlevel argument, which normally is used for BR2_JLEVEL
as the value for calling make -j<N> at the top-level. In fact,
BR2_JLEVEL is "unused" when using TLPB, because the top-level make
acts as the job server that distributes tokens to sub-makes (except
for the few build systems like waf or scons that don't support this),
so it's really the top-level make -j<N> that determines the level of
parallelism, and BR2_JLEVEL doesn't really have an effect.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Thomas: extend explanation a bit]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Start counting the line numbers in 1 instead of 0, in case an error
must be printed.
Both the error about a developer entry with no file entry and the error
about a file entry with no developer entry actually belong to the
non-empty line previous the one being analysed, so in these cases print
the line number from the line before.
Also count empty and comment lines, so a developer fixing the file can
jump to the correct line (or the nearest one).
At same time standardize the messages, printing the line number
also in the case of a warning for a file that is not in the tree
anymore.
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently 4 types of parsing errors/warnings can be found:
- entry for a file that is not in the tree anymore (warning)
- developer entry with no file entry (error)
- file entry with no developer (error)
- entry that is not a developer, a file or a comment (hard error)
Currently only the last one ends the script with -v with error code.
Make all 3 error types into hard errors and bail out at the first error
found, because the rest of the state machine is not designed to handle
malformed input.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a basic module that installs a single file, to check that it is
properly accounted for.
Reported-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thierry Bultel <thierry.bultel@linatsea.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
http://autobuild.buildroot.net/results/5d1/5d10f4f545dccf126e3f5b5efce777a393c5e7bc/http://autobuild.buildroot.net/results/7c2/7c2df31c6eb34b68e460e092d8c262bdc6c8f25a/
The configure script of (host-)libopenssl needs the FindBin perl module on the host:
Can't locate FindBin.pm in @INC (you may need to install the FindBin module)
(@INC contains: /home/buildroot/autobuild/instance-2/output-1/host/lib/perl
/usr/local/lib64/perl5/5.36 /usr/local/share/perl5/5.36
/usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5
/usr/share/perl5) at ./Configure line 15. BEGIN failed--compilation aborted
at ./Configure line 15.
As this is needed for both libopenssl and host-libopenssl (which does not
have a corresponding config symbol in the .config), we have to require it
unconditionally.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit is the result of running
support/scripts/gen-bootlin-toolchains now that 2022.08 toolchains
have been made available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It will be needed by check-package to run checks according to the file
type (the same determined by the command 'file').
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Extend test_check_package to also check the ignore list functionality.
Check:
- the entries in the ignore list use relative path;
- an entry in the ignore list actually ignores the warning;
- an outdated entry in the ignore list generates a warning by its own,
preventing the ignoring list to grow indefinitely.
For this to work, add 3 test fixtures, listing entries for an
pre-existing file in the br2-external used in the test.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This script checks for inconsistencies on symbols declared in Config.in
and used in .mk files.
Currently it checks only symbols following the pattern BR2_\w+ .
The script first gets the list of all files in the repository (using git
ls-files like 'make check-flake8' already do).
Then it parses all relevant files, searching for symbol definitions and
usages, and add entries into a database.
At the end, the database is searched for inconsistencies:
- symbol that is part of "choice" and is referenced with "select";
- legacy symbol being referenced in packages;
- legacy symbol being redefined in packages;
- symbol referenced but not defined;
- symbol defined but not referenced;
- legacy symbol that has a Note stating it is referenced by a package
(for legacy handling) but is referenced in the package without a
comment "# legacy";
- legacy symbol that has a Note stating it is referenced by a package
but it is not actually referenced.
There is also a debug parameter --search that dumps any filename or
symbol entries from the database that matches a regexp.
Sample usages:
$ utils/check-symbols
$ utils/docker-run utils/check-symbols
$ utils/check-symbols --search 'GETTEXT\b|\/openssl'
At same time the script is created:
- add unit tests for it, they can be run using:
utils/docker-run python3 -m pytest -v utils/checksymbolslib/
- add two more GitLab CI jobs: check-symbols (to check current tree
using the script) and check-check-symbols (to check the script against
its unit tests)
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Peter: print warnings to stderr, rename change_current_dir() to
change_to_top_dir()]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following the example of test-pkg config described in commit
"12c7a05da1 utils/test-pkg: add gitlab-ci support" to test a defconfig
fragment that contains a disabled option is currently possible, but
it do requires one to change the git config core.commentChart so the
lines starting with "#" are not discarded by git when creating/editing
the commit message.
For instance, without the indentation the 3rd line below would be
excluded from the commit message when the editor is closed:
test-pkg config:
SOME_OPTION=y
# OTHER_OPTION is not set
SOME_VARIABLE="some value"
Requiring to change git configs is not very nice.
So make the developer's life easier by changing the sed expression to
remove indentation with spaces from a defconfig fragment found on a
commit message.
For instance these lines become valid and generate a defconfig fragment
without the indentation of one space to be tested in GitLab CI:
test-pkg config:
SOME_OPTION=y
# OTHER_OPTION is not set
SOME_VARIABLE="some value"
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When we introduced support for the paranoid check of unsafe libraries
and headers path with commit 4ac8f78d37 (Add option for paranoid
unsafe path checking) back in 2014, we made it optional, as we expected
that would break quite a few packages.
Now, almost 8 years later, we only have three packages that explicitly
reference the option (dillo, gnuradio, and libtalloc), either in a patch
or in their .mk.
The option has been enabled by default since 2016, with 61c8854cef
(toolchain: enable paranoid unsafe path check by default), and that has
not triggered many build failures in a while.
The minimal defconfig used by test-pkg has also had it enabled as of
b6c98b3549 (minimal.config: add BR2_COMPILER_PARANOID_UNSAFE_PATH=y)
in 2017.
It is time to make that globally unconditional now.
There is still a remnant, in our binutils patches. As our toolchain may
get used outside of Buildroot, people may got the expectation that path
poisoning is only a warning, so we keep the current behaviour.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Romain Naour <romain.naour@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Open Fabrics Performance Tests.
This is a collection of tests written over uverbs intended
for use as a performance micro-benchmark. The tests may be
used for HW or SW tuning as well as for functional testing.
https://github.com/linux-rdma/perftest
Tested-by: Shamraiz Ashraf <shamraizashraf092@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
[yann.morin.1998@free.fr
- move all arch-related dependencies to _ARCH_SUPPORTS
- include musl condition in comment and its dependnecies
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is the userspace components for the Linux Kernel's
drivers/infiniband subsystem.
https://github.com/linux-rdma/rdma-core
Tested-by: Shamraiz Ashraf <shamraizashraf092@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
[yann.morin.1998@free.fr:
- select iproute2 as it provides the 'rdma' utility
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d48a8beb39)
[Peter: drop Makefile change]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 8450b76918 (package/pkg-cargo: move CARGO_HOME into DL_DIR)
allowed for a shared cargo cache of crates. Internally, cargo is
supposed to lock themselves when accessing that cache, and that commit
even had some research in that area, pointing at [0] for complaints
about too-coarse the lock, so it was deemed safe to have a shared cargo
home.
However, in practice, the locking as implemented by cargo, fails to
properly protect the concurrent accesses to the crates cache, with random
failures that manifest themselves like so:
Blocking waiting for file lock on package cache
Blocking waiting for file lock on package cache
Downloading crates ...
error: failed to sync
Caused by:
failed to download packages
Caused by:
failed to download `autocfg v1.1.0`
Caused by:
unable to get packages from source
Caused by:
failed to unpack package `autocfg v1.1.0`
Caused by:
failed to unpack entry at `autocfg-1.1.0/src/tests.rs`
Caused by:
No such file or directory (os error 2) while canonicalizing [...]
with the last few errors sometime being:
Caused by:
failed to parse manifest at `[...]/aho-corasick-0.7.18/Cargo.toml`
Caused by:
can't find library `aho_corasick`, rename file to `src/lib.rs` or specify lib.path
So, as we do not systematically use our own cargo build (we can use a
pre-built one with host-rust-bin), we can't patch cargo (even if we knew
what to do!).
Instead, we implement a lock ourselves, by wrapping the call to "cargo
vendor" with a flock(1) on cargo home.
Note: the download wrapper is already flock-ed, but it is a per-package
lock, so it does not prevent different packages from being downloaded in
parallel; if those packages need cargo vendoring, that will not be
protected by the flock on the dl wrapper. So we really do need a flock
on cargo home.
[0] https://github.com/rust-lang/cargo/issues/6930
Fixes: 8450b76918
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Moritz Bitsch <moritz@h6t.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit de4cf25375 (package/{rust, rust-bin}: bump to version 1.66.0)
forgot, despite the big comment above the version strings, to confirm
that the vendoring was still working.
Previously, we were adding the vendoring equivalence manually, but in
commit 04154a6517 (support/download/cargo-post-process: cargo output
for vendor config), we switched to using the output of "cargo vendor"
(on stdout) to support cases were the vendoring equivalence would be
more complex (e.g. when using crates not hosted on crates.io).
With rust until and including 1.65.0, "cargo vendor" would output (for
crates.io crates) the same output as our manual fixups, except it was
preceded by an empty line. So, to avoid recompting all our hashes, we
added a tweak to strip away the leading empty line in 04154a6517.
But rust 1.66.0 includes [0] which changes the output (on stdout) of
"cargo vendor", where the first empty line is no longer emitted.
This means that our tweak for rust 1.65.0 now strips out an important
part of the cargo vendor output, which renders the archives invalid, and
thus generates different archives, which fail to validate against our
hashes.
Fix this by doing what the comment in the post-process helper states,
and just keep the whole output of "cargo vendor", by just removing the
"tail --lines=+2". Since that comment is no longer meaningful, we drop
it too.
Now, all our 6 cargo-based packages, as well as our 5 python packages
that have rust code, can be vendored again, without changing our hashes,
but most importantly, with valid archives.
Still, we keep the comment above the versions strings, in the hope that
a future bumper will notice and be more careful at validating the
vendoring.
[0] https://github.com/rust-lang/cargo/pull/11273
Fixes:
http://autobuild.buildroot.org/results/bea/beac7674bbc9fd2f8777b5861f65afee9c485753/ (bat)
http://autobuild.buildroot.org/results/d1e/d1ec1ebbde115628a4b8b9099544347242a97c1c/ (dust)
http://autobuild.buildroot.org/results/f96/f968be895be9ca98b314fdd688ef8d3bdf4e5dfb/ (hyerfine)
http://autobuild.buildroot.org/results/a0c/a0cdb6cc9493f5248d98f98b13da854e12adc2be/ (ripgrep)
... and so many others...
Reported-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: James Hilliard <james.hilliard1@gmail.com>
Cc: Simon Richter <simon.richter@ptwdosimetry.com>
Reviewed-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Tested-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr:
- select host-cython in Config.in
- introduce obj_path in test sample
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, when asserting that a command succeeded, we just capture the
return code of the command. If that is not zero, the assertion fails,
but the error message is not very splicit:
AssertionError: 1 != 0
Replace the error message with an explicit message that dumps the failed
command, the error code, and the resulting output.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 86d32208b6 (support/testing/tests/init/test_systemd.py: use
downloaded kernel) stopped building a custom kernel for the systemd
tests, but forgot to drop the associated kernel config fragment.
That fragment is now not used in any test case, so we can drop it.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Z3, also known as the Z3 Theorem Prover, is a cross-platform
satisfiability modulo theories (SMT) solver.
https://github.com/Z3Prover/z3
Signed-off-by: Julien Olivain <ju.o@free.fr>
[yann.morin.1998@free.fr:
- python bindings 'depends on' python, not 'select' it
- fix check-package in test_z3.py
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 25680e6aa8)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Compilation of Perl-related packages fails if `PERL_MM_OPT` is defined.
We previously issued an error in this case.
Instead, simply `unexport` the variable.
Signed-off-by: Gleb Mazovetskiy <glex.spb@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Back when support/testing/tests/package/test_gdb was introduced, there
was a significant difference in how gdb < 10 and gdb >= 10 were
handled in gdb.mk, which explained why we were testing both gdb 9.x
and gdb 11.x.
However, support for gdb 9.x has now been dropped, and we only support
gdb >= 10.x, so testing gdb 9.x and 11.x separately no longer make
much sense. In addition:
- other GDB tests in the same file already test the default version,
which is now 11.x, meaning we in fact have duplicated tests between
the ones testing the default version and the ones testing 11.x
specifically
- GDB 9.x has been removed, which means all the tests testing GDB 9.x
are failing, with a Config.in.legacy build error.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3249828456 (TestGdbHostOnly9x)
https://gitlab.com/buildroot.org/buildroot/-/jobs/3249828454 (TestGdbHostGdbserver9x)
https://gitlab.com/buildroot.org/buildroot/-/jobs/3249828451 (TestGdbHostGdbTarget9x)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The CPIO filesystem generated by the test_python_crossbar test is too
large, and doesn't fit as an initramfs in the 256MB of RAM available
in the versatilepb machine. This causes a "Initramfs unpacking failed:
write error" when booting, and many files being missing from the root
filesystem, ultimately causing the test to fail.
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3249828587
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It seems like on Gitlab CI, the runners are quite slow, and the Flask
server does not startup in the 15 seconds we give it. So increase this
to 30 seconds before trying to contact the Flask server.
Hopefully fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3249828594
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Docker compose up outputs terminal control characters intended for
interactive output viewing.
Wget similarly can use the -q option to produce quieter logs.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Docker compose is now invoked as "docker compose" not "docker-compose."
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3249828442
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the output of `cargo vendor` to generate the vendor configuration.
Fixes the need to patch the generated configuration if there are
non-crates.io dependencies.
Note:
`cargo vendor` currently prints a newline before it prints the
needed configuration.
This is fixed in +nightly, will end up in +stable soon and must
be considered when updating cargo.
See: https://github.com/rust-lang/cargo/pull/11273
Until then it is needed to remove this first line to make sure
that the contents of .cargo/config will be the same as they were
generated with the earlier version of the script. Thus, the
hashes of the packages that use this script remain the same.
Signed-off-by: Simon Richter <simon.richter@ptwdosimetry.com>
[yann.morin.1998@free.fr: add comment in rust-bin.mk and rust.mk]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Startig with glibc 2.34, the gconv modules description has been split in
two:
- a common definition in the old location, /usr/lib/gconv/gconv-modules
- specific definitions in a subdirectory, /usr/lib/gconv/gconv-modules.d/
This is done so as to simplify the handling of glibc gconv modules, and
eventually to segregate those outside of glibc, and so that third-parties
may also provide their own gconv converters and their definitions.
And starting with that same glibc version, most of the gconv modules
definitions are moved to an extra configuration file in that
sub-directory.
It is thus no longer possible to use special code pages, like cp850,
which are very useful to access FAT-formatted devices.
Add support for this new gconv layout, while keeping support for older
glibc versions. Note that the modules themselves are not moved or
renamed, just the definition files have changed.
Instead of passing the one old gonv modules definitions file on stdin,
we pass the base directory to that file, and move into the script the
responsibility to find all the gconv definition files.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When only a subset of the glibc gconv modules are installed, we need to
generate a trimmed-down list of available modules. We currently use gawk
for that.
However, we are not using any GNU extension in that awk script, and it
happens to work as expected when using mawk (which has no GNU
extension).
Commit 11c1076db9 (toolchain: add option to copy the gconv libraries)
did not explain why it used gawk explicitly, and given the age for that
commit, we doubt we'd be able to have the involved participants recall
anything from that period...
Besides, gawk is not a requirement for Buildroot.
Switch over to using plain awk.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Newest versions requires a bit more time to finish.
Signed-off-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 25d865996d)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Any .pyc files generated by the pycompile script during target
finalization are currently counted in the "Unknown" package,
because packages-file-list.txt only contains the source .py file.
If a .py file is added to filesdict, add the corresponding .pyc
file as well.
Signed-off-by: Michael Klein <m.klein@mvz-labor-lb.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Polkit has two directories that are used to store rules.
Add the second directory to the existing tests, to ensure
that both work in the future.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Check that dependencies that are DT_NEEDED by a program are
automatically copied by dracut. We use cramfs, the package,
as it is small and just depends on libz.
Test more than one dracut config file.
Reported-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thierry Bultel <thierry.bultel@linatsea.fr>
Cc: Adam Duskett <aduskett@gmail.com>
[Arnout: remove test for features that haven't been merged yet]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Since we do not pivot_root/switch_root from the cpio, whatever we get
in the rootfs was exactly what we got by listing the cpio archive.
Drop the test for the presence of pv, it's redundant.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thierry Bultel <thierry.bultel@linatsea.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Due to a bug in the CodeSourcery ARM toolchain packaging, this
toolchain currently appears as available even for noMMU
configurations, which is obviously wrong. Due to this, the
bootlin-armv7m-uclibc.config fragment ends up using the CodeSourcery
ARM toolchain, which is obviously wrong for an ARM noMMU
configuration, causing a build failure when matching the toolchain
capabilities with the configuration.
Even though we will separately fix the CodeSourcery ARM toolchain
packaging, it makes sense to ensure that the
bootlin-armv7m-uclibc.config fragment explicitly selects the Bootlin
toolchain.
Reported-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This tests valdates that we can publish a message and read it back.
Signed-off-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr:
- don't manually start mosquitto, there's a startup script for that
- don't pass custom timeout
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit bf0d8c9659)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes flake8 errors:
support/scripts/pkg-stats:1013:133: E501 line too long (164 > 132 characters)
support/scripts/pkg-stats:1018:36: F541 f-string is missing placeholders
support/scripts/pkg-stats:1110:199: E261 at least two spaces before inline comment
For the first and the last one, we chose to split the long lines rather
than adding noqa: 501. Indeed, the long lines make it very unreadable,
and there are relatively natural places where the line can be broken.
Also split a line just below the second one in a similar way.
The f-string on 1018 doesn't need to be an f-string.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This is done either by switching to single quoted f-strings, triple
double quoted f-strings when needed, or simply single-quoted strings.
The renderer HTML is exactly identical before/after this commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-By: Sen Hastings <sen@phobosdpl.com>
Acked-By: Sen Hastings <sen@phobosdpl.com>
Within single-quoted f-strings, and within triple double quoted
strings, escaping all the double quotes is completely useless and
makes the code more difficult to read. Get rid of all this useless
escaping.
The renderer HTML is exactly identical before/after this commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-By: Sen Hastings <sen@phobosdpl.com>
Acked-By: Sen Hastings <sen@phobosdpl.com>
The python installer package isn't able to overwrite files of packges
that already exist, this causes problems when doing a rebuild or
update without a full clean.
To fix this we can use functionality from importlib to identify and
remove any conflicting python package files before installation.
We also need to use internals from python-installer, as we want to use
the same logic as pyinstaller uses internally for getting the scheme so
that we ensure we clean the correct package scheme (we want it to be the
same as the one we're installing)
Fixes:
Traceback (most recent call last):
File "/home/buildroot/buildroot/support/scripts/pyinstaller.py", line 69, in <module>
main()
File "/home/buildroot/buildroot/support/scripts/pyinstaller.py", line 61, in main
install(
File "/home/buildroot/buildroot/output/host/lib/python3.10/site-packages/installer/_core.py", line 109, in install
record = destination.write_file(
File "/home/buildroot/buildroot/output/host/lib/python3.10/site-packages/installer/destinations.py", line 207, in write_file
return self.write_to_fs(scheme, path_, stream, is_executable)
File "/home/buildroot/buildroot/output/host/lib/python3.10/site-packages/installer/destinations.py", line 167, in write_to_fs
raise FileExistsError(message)
FileExistsError: File already exists: /home/buildroot/buildroot/output/target/usr/lib/python3.10/site-packages/tinycss2/__init__.py
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Tested-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
[yann.morin.1998@free.fr:
- extend commit log about the use of the installer internals (the
symbols prefixed with '_')
- check path.files against explicitly None
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The python installer cli isn't able to overwrite files of packages
that already exist, this causes problems when doing a rebuild or
update without a full clean.
Since we need to add functionality to our pyinstaller.py script to fix
this issue we must also use pyinstaller.py for host python packages.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Tested-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 7652817c93 updated the
documentation but forgot to update support/dependencies
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
It includes a simple test for the full cpio image, and a test of the
dracut image. To validate that the dracut image is a subset of the full
image, 'pv' is added to the image, and the test verifies that pv is not
part of the image. Note that the real rootfs is not mounted at the
moment, so pv is never available in the running image.
Systemd and other init systems are currently untested.
Signed-off-by: Thierry Bultel <thierry.bultel@linatsea.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The CPIO filesystem generated by the test_python_s3transfer test is
too large, and doesn't fit as an initramfs in the 256MB of RAM
available in the versatilepb machine. This causes a "Initramfs
unpacking failed: write error" when booting, and many files being
missing from the root filesystem, ultimately causing the test to fail.
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884635126
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- drop superfluous# BR2_TARGET_ROOTFS_TAR is not set
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The CPIO filesystem generated by the test_python_botocore test is too
large, and doesn't fit as an initramfs in the 256MB of RAM available
in the versatilepb machine. This causes a "Initramfs unpacking failed:
write error" when booting, and many files being missing from the root
filesystem, ultimately causing the test to fail.
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884635042
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- drop superfluous# BR2_TARGET_ROOTFS_TAR is not set
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The CPIO filesystem generated by the test_python_boto3 test is too
large, and doesn't fit as an initramfs in the 256MB of RAM available
in the versatilepb machine. This causes a "Initramfs unpacking failed:
write error" when booting, and many files being missing from the root
filesystem, ultimately causing the test to fail.
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884635041
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- drop superfluous# BR2_TARGET_ROOTFS_TAR is not set
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In commit
9267b0f14d ("package/f2fs-tools: bump to
version 1.15.0"), f2fs-tools was bumped from 1.14.0 to 1.15.0.
It turns out that this version bump causes the output of dump.f2fs to
slightly change.
In version 1.14.0, it looked like this:
Info: Segments per section = 1
Info: Sections per zone = 1
Info: sector size = 512
Info: total sectors = 262144 (128 MB)
Info: MKFS version
"Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 2022"
Info: FSCK version
from "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
to "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
Info: superblock features = 0 :
Info: superblock encrypt level = 0, salt = 00000000000000000000000000000000
Info: total FS sectors = 262144 (128 MB)
Info: CKPT version = 70c101c3
Info: checkpoint state = 181 : trimmed nat_bits unmount
In version 1.15.0, it looked like this:
Info: MKFS version
"Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 2022"
Info: FSCK version
from "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
to "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
Info: superblock features = 0 :
Info: superblock encrypt level = 0, salt = 00000000000000000000000000000000
Info: Segments per section = 1
Info: Sections per zone = 1
Info: total FS sectors = 262144 (128 MB)
Info: CKPT version = b89f8bb
Info: checkpoint state = 181 : trimmed nat_bits unmount
You will notice that the message "Info: total sectors = 262144 (128
MB)" is no longer present, and only "Info: total FS sectors =
262144 (128 MB)" is not present.
Except our test case was precisely looking for this "Info: total
sectors" string in the output, causing the test to fail.
We fix this by simply matching on "Info: total FS sectors" now.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884634814
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Octave package test can occasionally fail due to timeout while testing
some octave modules. This commit slightly increase the timeout value
to reduce those failures.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit makes sure that the python-crossbar package pulls in the
right dependencies, based on the requirements-min.txt.
It does so by:
- Changing the 0002-Remove-idna-requirement patch by a more thorough
patch that drops all indirect dependencies from
requirements-min.txt, making it easier to have a 1:1 mapping
between lines in requirements-min.txt and Buildroot selects.
- Changing the
0003-crossbar-webservice-wap-use-markupsafe-instead-of-we patch to
update requirements-min.txt to indicate the new MarkupSafe
dependency. Here again, to have a 1:1 mapping between lines in
requirements-min.txt and Buildroot selects.
- Updating the Buildroot selects to match requirements-min.txt, with
relevant comments when it does not.
- Fixing up the Crossbar test case to no longer force autobahn to use
umsgpack. Instead, we now use the default of msgpack that is
expected by autobahn.
Fixes bug #14556, https://bugs.busybox.net/show_bug.cgi?id=14556.
Signed-off-by: Emile Cormier <emile.cormier.jr@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
python-scipy is moving to a meson build infrastructure, and requires
fortran cross-compilation. This commit extends the cross-compilation
configuration file generated for use by meson to add the "fortran",
"fortran_args" and "fortran_link_args" properties.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
construct is a Python library for declarative serialization/
deserialization of structured binary data.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Test the scipy::io module, to demonstrate that runtime dependencies
are correct.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Importing the scipy module in the Python interpreter running in Qemu
takes quite a while on slow machine, so a timeout extension to 30
seconds is needed to make sure the test has the time to run.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This adds an optional linebreak at the vendor attribute in the CPE ID.
It should be noted this is purely for formatting/layout purposes
and does not actually insert any additional characters
(newline or otherwise) into the rendered text.
This means that even though the text renders across two lines,
copy-pasting will still yield one line of text.
example: https://sen-h.github.io/pkg-stats/c245575.html
see also: https://developer.mozilla.org/en-US/docs/Web/HTML/Element/wbr
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Change the test into a characterization test for all warnings and errors
get-developers can return when parsing the DEVELOPERS files.
It will be helpful when changing the behavior of get-developers to bail
out on all syntax checking warnings.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test relies on the OLA Dummy plugin presenting a test device
and port. It starts the daemon, performs few configuration commands,
covers the Python bindings and also test the OLA web interface.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
