NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

configs/friendlyarm_nanopi_neo_plus2: remove defconfig

Browse Source 
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.

See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499055

Cc: Louis Aussedat <aussedat.louis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit is contained in:
Thomas Petazzoni 2022-11-01 23:19:55 +01:00 committed by Yann E. MORIN
parent 5f7a517f5c
commit d968cab0bd
8 changed files with 0 additions and 212 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
DEVELOPERS
View File

@ -1780,8 +1780,6 @@ F: package/ti-sgx-km/
F: package/ti-sgx-um/ F: package/ti-sgx-um/
N: Louis Aussedat <aussedat.louis@gmail.com> N: Louis Aussedat <aussedat.louis@gmail.com>
F: board/friendlyarm/nanopi-neo-plus2/
F: configs/friendlyarm_nanopi_neo_plus2_defconfig
F: package/mfoc F: package/mfoc
F: package/libpam-nfc F: package/libpam-nfc
F: package/python-dnspython/ F: package/python-dnspython/

4
board/friendlyarm/nanopi-neo-plus2/extlinux.conf
View File

@ -1,4 +0,0 @@
label linux
kernel /Image
devicetree /sun50i-h5-nanopi-neo-plus2.dtb
append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait

40
board/friendlyarm/nanopi-neo-plus2/genimage.cfg
View File

@ -1,40 +0,0 @@
image boot.vfat {
vfat {
files = {
"Image",
"sun50i-h5-nanopi-neo-plus2.dtb",
"extlinux"
}
}
size = 64M
}
image sdcard.img {
hdimage {
}
partition spl {
in-partition-table = "no"
image = "sunxi-spl.bin"
offset = 8K
}
partition u-boot {
in-partition-table = "no"
image = "u-boot.itb"
offset = 40K
size = 1M # 1MB - 40KB
}
partition boot {
partition-type = 0xC
bootable = "true"
image = "boot.vfat"
}
partition rootfs {
partition-type = 0x83
image = "rootfs.ext4"
}
}

10
board/friendlyarm/nanopi-neo-plus2/linux-extras.config
View File

@ -1,10 +0,0 @@
# wireless core
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
CONFIG_MAC80211=y
CONFIG_CFG80211_WEXT=y
# wireless drivers
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_BRCMFMAC=m

4
board/friendlyarm/nanopi-neo-plus2/post-build.sh
View File

@ -1,4 +0,0 @@
#!/bin/sh
BOARD_DIR="$(dirname $0)"
install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf

37
board/friendlyarm/nanopi-neo-plus2/readme.txt
View File

@ -1,37 +0,0 @@
Intro
=====
This default configuration will allow you to start experimenting with the
buildroot environment for the Nanopi NEO Plus2. With the current configuration
it will bring-up the board, and allow access through the serial console.
Nanopi NEO2 link:
http://nanopi.io/nanopi-neo-plus2.html
Wiki link:
http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO_Plus2
This configuration uses U-Boot mainline and kernel mainline.
How to build
============
$ make friendlyarm_nanopi_neo_plus2_defconfig
$ make
Note: you will need access to the internet to download the required
sources.
How to write the SD card
========================
Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.
Copy the bootable "sdcard.img" onto an SD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
$ sudo sync
Insert the micro SDcard in your Nanopi NEO Plus2 and power it up. The console
is on the serial line, 115200 8N1.

53
board/friendlyarm/nanopi-neo-plus2/rootfs_overlay/lib/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt
View File

@ -1,53 +0,0 @@
#AP6212_NVRAM_V1.0.1_20160606
# 2.4 GHz, 20 MHz BW mode
# The following parameter values are just placeholders, need to be updated.
manfid=0x2d0
prodid=0x0726
vendid=0x14e4
devid=0x43e2
boardtype=0x0726
boardrev=0x1101
boardnum=22
macaddr=00:90:4c:c5:12:38
sromrev=11
boardflags=0x00404201
xtalfreq=26000
nocrc=1
ag0=255
aa2g=1
ccode=ALL
pa0itssit=0x20
extpagain2g=0
#PA parameters for 2.4GHz, measured at CHIP OUTPUT
pa2ga0=-168,7161,-820
AvVmid_c0=0x0,0xc8
cckpwroffset0=5
# PPR params
maxp2ga0=90
txpwrbckof=6
cckbw202gpo=0x5555
legofdmbw202gpo=0x77777777
mcsbw202gpo=0xaaaaaaaa
# OFDM IIR :
ofdmdigfilttype=7
# PAPD mode:
papdmode=2
il0macaddr=00:90:4c:c5:12:38
wl0id=0x431b
#OOB parameters
hostwake=0x40
hostrdy=0x41
usbrdy=0x03
usbrdydelay=100
deadman_to=0xffffffff
# muxenab: 0x1 for UART enable, 0x10 for Host awake
muxenab=0x10
# CLDO PWM voltage settings - 0x4 - 1.1 volt
#cldo_pwm=0x4
glitch_based_crsmin=1

62
configs/friendlyarm_nanopi_neo_plus2_defconfig
View File

@ -1,62 +0,0 @@
BR2_aarch64=y
BR2_cortex_a53=y
BR2_ARM_FPU_VFPV4=y
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_3=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
BR2_ROOTFS_OVERLAY="board/friendlyarm/nanopi-neo-plus2/rootfs_overlay"
# Firmware
BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
R2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
# Bootloader
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.10"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi_neo_plus2"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
BR2_TARGET_UBOOT_SPL=y
BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.3.4"
BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-nanopi-neo-plus2"
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/friendlyarm/nanopi-neo-plus2/linux-extras.config"
# Filesystem
BR2_TARGET_GENERIC_ISSUE="Welcome to FriendlyARM Nanopi NEO Plus2"
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-neo-plus2/genimage.cfg"
BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-neo-plus2/post-build.sh"
# wireless firmware
BR2_PACKAGE_LINUX_FIRMWARE=y
BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXX=y
# wireless tools
BR2_PACKAGE_IW=y
BR2_PACKAGE_WIRELESS_TOOLS=y
BR2_PACKAGE_WIRELESS_TOOLS_LIB=y
BR2_PACKAGE_WPA_SUPPLICANT=y
BR2_PACKAGE_WPA_SUPPLICANT_NL80211=y
BR2_PACKAGE_WPA_SUPPLICANT_CLI=y