NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
bbd6fb9c2d
kumquat-buildroot/package/openocd/openocd.mk

125 lines
5.0 KiB
Makefile
Raw Normal View History

Normalize separator size to 80 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-06-06 01:53:30 +02:00
################################################################################
package: add openocd support with only the following Adapters - FTDI FT2xxx/FT4xxx - J-Link (Segger and Atmel SAM-ICE) - Versaloon-Link JTAG Adapter [Peter: Config.in tweaks] Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2011-09-20 13:19:52 +02:00
#
# openocd
#
Normalize separator size to 80 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-06-06 01:53:30 +02:00
################################################################################
packages: remove all := signs Finally get rid of all := used for variable definitions in packages, as we suggest in our manual and during the review of new packages. While I was at it, I also sometimes added a few missing new lines between the header and the first variable definition. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-01-20 10:45:47 +01:00
openocd: bump to 0.10.0 Some configure options have been renamed. Support for the deprecated FT2232 devices has been removed in this release, so remove this option. Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com> [Thomas: - Add Config.in.legacy handling, suggested by Arnout. - Improve commit log with more details, suggested by Arnout.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-04-28 16:34:34 +02:00
OPENOCD_VERSION = 0.10.0
package: add openocd support with only the following Adapters - FTDI FT2xxx/FT4xxx - J-Link (Segger and Atmel SAM-ICE) - Versaloon-Link JTAG Adapter [Peter: Config.in tweaks] Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2011-09-20 13:19:52 +02:00
OPENOCD_SOURCE = openocd-$(OPENOCD_VERSION).tar.bz2
openocd: bump to 0.9.0 Remove obsolete compilation error patch and update jimtcl related patch. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-12-01 09:52:22 +01:00
OPENOCD_SITE = http://sourceforge.net/projects/openocd/files/openocd/$(OPENOCD_VERSION)
package/openocd: add license infos Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-08-17 06:37:40 +02:00
OPENOCD_LICENSE = GPL-2.0+
OPENOCD_LICENSE_FILES = COPYING
package/openocd: fix uclinux build Fixes http://autobuild.buildroot.net/results/cd3/cd3f5b7329f45c2b75ed319caef3c6aa0e94ee2e/ Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-08-17 06:37:39 +02:00
# 0002-configure-enable-build-on-uclinux.patch patches configure.ac
OPENOCD_AUTORECONF = YES
package/openocd: fix fallout after no-C++ fixups Commit 4cd1ab158 (core: alternate solution to disable C++) made use of a non-existent 'no' binary when C++ is not available in the toolchain. However, some packages, like jimtcl as bundled in opeocd, really want to find the binary that $CXX contains. Revert openocd to use 'false' instead of 'no'. Fixes: http://autobuild.buildroot.org/results/cbd/cbd5ab97fb0659968ff628461130627cf1745955/ Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-03-31 09:20:20 +02:00
# The bundled jimtcl really wants to find a existing $CXX, so feed it
# false when we do not have one.
OPENOCD_CONF_ENV = \
$(if $(BR2_INSTALL_LIBSTDCPP),,CXX=false) \
CFLAGS="$(TARGET_CFLAGS) -std=gnu99"
openocd: bump to version 0.8.0 This patch adds the management of (almost) all the config options of openocd 0.8.0. A BR config variable is added for (almost) every adapter known to openocd and all the dependencies are automatically calculated from the chosen adapters, so only the necessary libraries are built. Note that CMSIS_DAP adapter requires hidapi (not libhid) and hidapi is not actually included in buildroot, so it has been removed. Also zy1000 adapters are actually broken in openocd and have been removed. The host version of the package enables all the possible adapters and the related libraries. [Thomas: - Slightly fixup the commit log. - Rename the patches to the new patch naming convention. - Update hash file using a contribution from Vincent Stehlé. - Move the thread dependency from the OpenOCD option down to each sub-option that actually needs it (when it needs libusb, libusb-compat or libftdi). We keep only one comment, as we would otherwise have to add too many repeatitive comments. - Remove commented options. - Add missing dependency on BR2_ARCH_HAS_ATOMICS when selecting BR2_PACKAGE_LIBFTDI. - Remove trailing white spaces. - Pass -std=gnu99, needed to build with a basic toolchain. - Write the OPENOCD_DEPENDENCIES and OPENOCD_CONF_OPTS conditions in a more compact way. - Adjust indentation for HOST_OPENOCD_CONF_OPTS. - Reword the comment above HOST_OPENOCD_CONF_OPTS.] Signed-off-by: Claudio Laurita <claudio.laurita@integrazionetotale.it> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-14 20:02:17 +01:00
packages: rename FOO_CONF_OPT into FOO_CONF_OPTS To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS, make the same change for FOO_CONF_OPT. Sed command used: find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g' Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-09-27 21:32:44 +02:00
OPENOCD_CONF_OPTS = \
package: add openocd support with only the following Adapters - FTDI FT2xxx/FT4xxx - J-Link (Segger and Atmel SAM-ICE) - Versaloon-Link JTAG Adapter [Peter: Config.in tweaks] Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2011-09-20 13:19:52 +02:00
--oldincludedir=$(STAGING_DIR)/usr/include \
--includedir=$(STAGING_DIR)/usr/include \
--disable-doxygen-html \
openocd: bump to version 0.8.0 This patch adds the management of (almost) all the config options of openocd 0.8.0. A BR config variable is added for (almost) every adapter known to openocd and all the dependencies are automatically calculated from the chosen adapters, so only the necessary libraries are built. Note that CMSIS_DAP adapter requires hidapi (not libhid) and hidapi is not actually included in buildroot, so it has been removed. Also zy1000 adapters are actually broken in openocd and have been removed. The host version of the package enables all the possible adapters and the related libraries. [Thomas: - Slightly fixup the commit log. - Rename the patches to the new patch naming convention. - Update hash file using a contribution from Vincent Stehlé. - Move the thread dependency from the OpenOCD option down to each sub-option that actually needs it (when it needs libusb, libusb-compat or libftdi). We keep only one comment, as we would otherwise have to add too many repeatitive comments. - Remove commented options. - Add missing dependency on BR2_ARCH_HAS_ATOMICS when selecting BR2_PACKAGE_LIBFTDI. - Remove trailing white spaces. - Pass -std=gnu99, needed to build with a basic toolchain. - Write the OPENOCD_DEPENDENCIES and OPENOCD_CONF_OPTS conditions in a more compact way. - Adjust indentation for HOST_OPENOCD_CONF_OPTS. - Reword the comment above HOST_OPENOCD_CONF_OPTS.] Signed-off-by: Claudio Laurita <claudio.laurita@integrazionetotale.it> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-14 20:02:17 +01:00
--with-jim-shared=no \
--disable-shared \
openocd: pass --disable-werror to fix build issues Should fix: http://autobuild.buildroot.org/results/91d/91d2ae34f14f1978e0985e75f803055d51201a93/ and similar build problems. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-01-02 20:32:47 +01:00
--enable-dummy \
--disable-werror
package: add openocd support with only the following Adapters - FTDI FT2xxx/FT4xxx - J-Link (Segger and Atmel SAM-ICE) - Versaloon-Link JTAG Adapter [Peter: Config.in tweaks] Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2011-09-20 13:19:52 +02:00
openocd: bump to version 0.8.0 This patch adds the management of (almost) all the config options of openocd 0.8.0. A BR config variable is added for (almost) every adapter known to openocd and all the dependencies are automatically calculated from the chosen adapters, so only the necessary libraries are built. Note that CMSIS_DAP adapter requires hidapi (not libhid) and hidapi is not actually included in buildroot, so it has been removed. Also zy1000 adapters are actually broken in openocd and have been removed. The host version of the package enables all the possible adapters and the related libraries. [Thomas: - Slightly fixup the commit log. - Rename the patches to the new patch naming convention. - Update hash file using a contribution from Vincent Stehlé. - Move the thread dependency from the OpenOCD option down to each sub-option that actually needs it (when it needs libusb, libusb-compat or libftdi). We keep only one comment, as we would otherwise have to add too many repeatitive comments. - Remove commented options. - Add missing dependency on BR2_ARCH_HAS_ATOMICS when selecting BR2_PACKAGE_LIBFTDI. - Remove trailing white spaces. - Pass -std=gnu99, needed to build with a basic toolchain. - Write the OPENOCD_DEPENDENCIES and OPENOCD_CONF_OPTS conditions in a more compact way. - Adjust indentation for HOST_OPENOCD_CONF_OPTS. - Reword the comment above HOST_OPENOCD_CONF_OPTS.] Signed-off-by: Claudio Laurita <claudio.laurita@integrazionetotale.it> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-14 20:02:17 +01:00
# Rely on the Config.in options of each individual adapter selecting
# the dependencies they need.
OPENOCD_DEPENDENCIES = \
package/openocd: depends on libftdi1 instead of libftdi Note that, if both libftdi and libftdi1 are available, openocd will prefer libftdi1, so does Buildroot. ;-) Signed-off-by: Samuel Martin <s.martin49@gmail.com> Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-03-17 18:36:36 +01:00
$(if $(BR2_PACKAGE_LIBFTDI1),libftdi1) \
openocd: bump to version 0.8.0 This patch adds the management of (almost) all the config options of openocd 0.8.0. A BR config variable is added for (almost) every adapter known to openocd and all the dependencies are automatically calculated from the chosen adapters, so only the necessary libraries are built. Note that CMSIS_DAP adapter requires hidapi (not libhid) and hidapi is not actually included in buildroot, so it has been removed. Also zy1000 adapters are actually broken in openocd and have been removed. The host version of the package enables all the possible adapters and the related libraries. [Thomas: - Slightly fixup the commit log. - Rename the patches to the new patch naming convention. - Update hash file using a contribution from Vincent Stehlé. - Move the thread dependency from the OpenOCD option down to each sub-option that actually needs it (when it needs libusb, libusb-compat or libftdi). We keep only one comment, as we would otherwise have to add too many repeatitive comments. - Remove commented options. - Add missing dependency on BR2_ARCH_HAS_ATOMICS when selecting BR2_PACKAGE_LIBFTDI. - Remove trailing white spaces. - Pass -std=gnu99, needed to build with a basic toolchain. - Write the OPENOCD_DEPENDENCIES and OPENOCD_CONF_OPTS conditions in a more compact way. - Adjust indentation for HOST_OPENOCD_CONF_OPTS. - Reword the comment above HOST_OPENOCD_CONF_OPTS.] Signed-off-by: Claudio Laurita <claudio.laurita@integrazionetotale.it> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-14 20:02:17 +01:00
$(if $(BR2_PACKAGE_LIBUSB),libusb) \
$(if $(BR2_PACKAGE_LIBUSB_COMPAT),libusb-compat) \
$(if $(BR2_PACKAGE_LIBHID),libhid)
package: add openocd support with only the following Adapters - FTDI FT2xxx/FT4xxx - J-Link (Segger and Atmel SAM-ICE) - Versaloon-Link JTAG Adapter [Peter: Config.in tweaks] Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2011-09-20 13:19:52 +02:00
# Adapters
openocd: bump to version 0.8.0 This patch adds the management of (almost) all the config options of openocd 0.8.0. A BR config variable is added for (almost) every adapter known to openocd and all the dependencies are automatically calculated from the chosen adapters, so only the necessary libraries are built. Note that CMSIS_DAP adapter requires hidapi (not libhid) and hidapi is not actually included in buildroot, so it has been removed. Also zy1000 adapters are actually broken in openocd and have been removed. The host version of the package enables all the possible adapters and the related libraries. [Thomas: - Slightly fixup the commit log. - Rename the patches to the new patch naming convention. - Update hash file using a contribution from Vincent Stehlé. - Move the thread dependency from the OpenOCD option down to each sub-option that actually needs it (when it needs libusb, libusb-compat or libftdi). We keep only one comment, as we would otherwise have to add too many repeatitive comments. - Remove commented options. - Add missing dependency on BR2_ARCH_HAS_ATOMICS when selecting BR2_PACKAGE_LIBFTDI. - Remove trailing white spaces. - Pass -std=gnu99, needed to build with a basic toolchain. - Write the OPENOCD_DEPENDENCIES and OPENOCD_CONF_OPTS conditions in a more compact way. - Adjust indentation for HOST_OPENOCD_CONF_OPTS. - Reword the comment above HOST_OPENOCD_CONF_OPTS.] Signed-off-by: Claudio Laurita <claudio.laurita@integrazionetotale.it> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-14 20:02:17 +01:00
OPENOCD_CONF_OPTS += \
package/openocd: explicitly disable unselected adapters Some adapters are automatically enabled, but may not be built because of missing (archecture) dependencies. So, just set the options symetrically. Signed-off-by: Samuel Martin <s.martin49@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-01-02 22:19:26 +01:00
$(if $(BR2_PACKAGE_OPENOCD_FTDI),--enable-ftdi,--disable-ftdi) \
$(if $(BR2_PACKAGE_OPENOCD_STLINK),--enable-stlink,--disable-stlink) \
$(if $(BR2_PACKAGE_OPENOCD_TI_ICDI),--enable-ti-icdi,--disable-ti-icdi) \
$(if $(BR2_PACKAGE_OPENOCD_ULINK),--enable-ulink,--disable-ulink) \
$(if $(BR2_PACKAGE_OPENOCD_UBLASTER2),--enable-usb-blaster-2,--disable-usb-blaster-2) \
$(if $(BR2_PACKAGE_OPENOCD_JLINK),--enable-jlink,--disable-jlink) \
$(if $(BR2_PACKAGE_OPENOCD_OSDBM),--enable-osbdm,--disable-osbdm) \
$(if $(BR2_PACKAGE_OPENOCD_OPENDOUS),--enable-opendous,--disable-opendous) \
$(if $(BR2_PACKAGE_OPENOCD_AICE),--enable-aice,--disable-aice) \
$(if $(BR2_PACKAGE_OPENOCD_VSLLINK),--enable-vsllink,--disable-vsllink) \
$(if $(BR2_PACKAGE_OPENOCD_USBPROG),--enable-usbprog,--disable-usbprog) \
$(if $(BR2_PACKAGE_OPENOCD_RLINK),--enable-rlink,--disable-rlink) \
$(if $(BR2_PACKAGE_OPENOCD_ARMEW),--enable-armjtagew,--disable-armjtagew) \
$(if $(BR2_PACKAGE_OPENOCD_CMSIS_DAP),--enable-cmsis-dap,--disable-cmsis-dap) \
$(if $(BR2_PACKAGE_OPENOCD_PARPORT),--enable-parport,--disable-parport) \
$(if $(BR2_PACKAGE_OPENOCD_VPI),--enable-jtag_vpi,--disable-jtag_vpi) \
openocd: bump to 0.10.0 Some configure options have been renamed. Support for the deprecated FT2232 devices has been removed in this release, so remove this option. Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com> [Thomas: - Add Config.in.legacy handling, suggested by Arnout. - Improve commit log with more details, suggested by Arnout.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-04-28 16:34:34 +02:00
$(if $(BR2_PACKAGE_OPENOCD_UBLASTER),--enable-usb-blaster,--disable-usb-blaster) \
package/openocd: explicitly disable unselected adapters Some adapters are automatically enabled, but may not be built because of missing (archecture) dependencies. So, just set the options symetrically. Signed-off-by: Samuel Martin <s.martin49@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-01-02 22:19:26 +01:00
$(if $(BR2_PACKAGE_OPENOCD_AMTJT),--enable-amtjtagaccel,--disable-amjtagaccel) \
$(if $(BR2_PACKAGE_OPENOCD_ZY1000_MASTER),--enable-zy1000-master,--disable-zy1000-master) \
$(if $(BR2_PACKAGE_OPENOCD_ZY1000),--enable-zy1000,--disable-zy1000) \
$(if $(BR2_PACKAGE_OPENOCD_EP93XX),--enable-ep93xx,--disable-ep93xx) \
$(if $(BR2_PACKAGE_OPENOCD_AT91RM),--enable-at91rm9200,--disable-at91rm9200) \
$(if $(BR2_PACKAGE_OPENOCD_BCM2835),--enable-bcm2835gpio,--disable-bcm2835gpio) \
$(if $(BR2_PACKAGE_OPENOCD_GW16012),--enable-gw16012,--disable-gw16012) \
openocd: bump to 0.10.0 Some configure options have been renamed. Support for the deprecated FT2232 devices has been removed in this release, so remove this option. Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com> [Thomas: - Add Config.in.legacy handling, suggested by Arnout. - Improve commit log with more details, suggested by Arnout.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-04-28 16:34:34 +02:00
$(if $(BR2_PACKAGE_OPENOCD_PRESTO),--enable-presto,--disable-presto) \
$(if $(BR2_PACKAGE_OPENOCD_OPENJTAG),--enable-openjtag,--disable-openjtag) \
package/openocd: explicitly disable unselected adapters Some adapters are automatically enabled, but may not be built because of missing (archecture) dependencies. So, just set the options symetrically. Signed-off-by: Samuel Martin <s.martin49@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-01-02 22:19:26 +01:00
$(if $(BR2_PACKAGE_OPENOCD_BUSPIRATE),--enable-buspirate,--disable-buspirate) \
$(if $(BR2_PACKAGE_OPENOCD_SYSFS),--enable-sysfsgpio,--disable-sysfsgpio)
openocd: bump to version 0.8.0 This patch adds the management of (almost) all the config options of openocd 0.8.0. A BR config variable is added for (almost) every adapter known to openocd and all the dependencies are automatically calculated from the chosen adapters, so only the necessary libraries are built. Note that CMSIS_DAP adapter requires hidapi (not libhid) and hidapi is not actually included in buildroot, so it has been removed. Also zy1000 adapters are actually broken in openocd and have been removed. The host version of the package enables all the possible adapters and the related libraries. [Thomas: - Slightly fixup the commit log. - Rename the patches to the new patch naming convention. - Update hash file using a contribution from Vincent Stehlé. - Move the thread dependency from the OpenOCD option down to each sub-option that actually needs it (when it needs libusb, libusb-compat or libftdi). We keep only one comment, as we would otherwise have to add too many repeatitive comments. - Remove commented options. - Add missing dependency on BR2_ARCH_HAS_ATOMICS when selecting BR2_PACKAGE_LIBFTDI. - Remove trailing white spaces. - Pass -std=gnu99, needed to build with a basic toolchain. - Write the OPENOCD_DEPENDENCIES and OPENOCD_CONF_OPTS conditions in a more compact way. - Adjust indentation for HOST_OPENOCD_CONF_OPTS. - Reword the comment above HOST_OPENOCD_CONF_OPTS.] Signed-off-by: Claudio Laurita <claudio.laurita@integrazionetotale.it> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-14 20:02:17 +01:00
# Enable all configuration options for host build.
#
# Note that deprecated options have been removed. CMSIS_DAP needs
# hidapi (currently not included in buildroot) and zy1000 stuff fails
# to build, so they've been removed too.
#
HOST_OPENOCD_CONF_OPTS = \
--enable-ftdi \
--enable-stlink \
--enable-ti-icdi \
--enable-ulink \
--enable-usb-blaster-2 \
--enable-jlink \
--enable-osbdm \
--enable-opendous \
--enable-aice \
--enable-vsllink \
--enable-usbprog \
--enable-rlink \
--enable-armjtagew \
--enable-parport \
--enable-jtag_vpi \
openocd: bump to 0.10.0 Some configure options have been renamed. Support for the deprecated FT2232 devices has been removed in this release, so remove this option. Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com> [Thomas: - Add Config.in.legacy handling, suggested by Arnout. - Improve commit log with more details, suggested by Arnout.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-04-28 16:34:34 +02:00
--enable-usb-blaster \
openocd: bump to version 0.8.0 This patch adds the management of (almost) all the config options of openocd 0.8.0. A BR config variable is added for (almost) every adapter known to openocd and all the dependencies are automatically calculated from the chosen adapters, so only the necessary libraries are built. Note that CMSIS_DAP adapter requires hidapi (not libhid) and hidapi is not actually included in buildroot, so it has been removed. Also zy1000 adapters are actually broken in openocd and have been removed. The host version of the package enables all the possible adapters and the related libraries. [Thomas: - Slightly fixup the commit log. - Rename the patches to the new patch naming convention. - Update hash file using a contribution from Vincent Stehlé. - Move the thread dependency from the OpenOCD option down to each sub-option that actually needs it (when it needs libusb, libusb-compat or libftdi). We keep only one comment, as we would otherwise have to add too many repeatitive comments. - Remove commented options. - Add missing dependency on BR2_ARCH_HAS_ATOMICS when selecting BR2_PACKAGE_LIBFTDI. - Remove trailing white spaces. - Pass -std=gnu99, needed to build with a basic toolchain. - Write the OPENOCD_DEPENDENCIES and OPENOCD_CONF_OPTS conditions in a more compact way. - Adjust indentation for HOST_OPENOCD_CONF_OPTS. - Reword the comment above HOST_OPENOCD_CONF_OPTS.] Signed-off-by: Claudio Laurita <claudio.laurita@integrazionetotale.it> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-14 20:02:17 +01:00
--enable-amtjtagaccel \
--enable-gw16012 \
openocd: bump to 0.10.0 Some configure options have been renamed. Support for the deprecated FT2232 devices has been removed in this release, so remove this option. Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com> [Thomas: - Add Config.in.legacy handling, suggested by Arnout. - Improve commit log with more details, suggested by Arnout.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-04-28 16:34:34 +02:00
--enable-presto \
--enable-openjtag \
openocd: bump to version 0.8.0 This patch adds the management of (almost) all the config options of openocd 0.8.0. A BR config variable is added for (almost) every adapter known to openocd and all the dependencies are automatically calculated from the chosen adapters, so only the necessary libraries are built. Note that CMSIS_DAP adapter requires hidapi (not libhid) and hidapi is not actually included in buildroot, so it has been removed. Also zy1000 adapters are actually broken in openocd and have been removed. The host version of the package enables all the possible adapters and the related libraries. [Thomas: - Slightly fixup the commit log. - Rename the patches to the new patch naming convention. - Update hash file using a contribution from Vincent Stehlé. - Move the thread dependency from the OpenOCD option down to each sub-option that actually needs it (when it needs libusb, libusb-compat or libftdi). We keep only one comment, as we would otherwise have to add too many repeatitive comments. - Remove commented options. - Add missing dependency on BR2_ARCH_HAS_ATOMICS when selecting BR2_PACKAGE_LIBFTDI. - Remove trailing white spaces. - Pass -std=gnu99, needed to build with a basic toolchain. - Write the OPENOCD_DEPENDENCIES and OPENOCD_CONF_OPTS conditions in a more compact way. - Adjust indentation for HOST_OPENOCD_CONF_OPTS. - Reword the comment above HOST_OPENOCD_CONF_OPTS.] Signed-off-by: Claudio Laurita <claudio.laurita@integrazionetotale.it> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-14 20:02:17 +01:00
--enable-buspirate \
--enable-sysfsgpio \
Globally replace $(HOST_DIR)/usr/include with $(HOST_DIR)/include Since things are no longer installed in $(HOST_DIR)/usr, the callers should also not refer to it. This is a mechanical change with git grep -l '$(HOST_DIR)/usr/include' | xargs sed -i 's%$(HOST_DIR)/usr/include%$(HOST_DIR)/include%g' Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-05 13:14:22 +02:00
--oldincludedir=$(HOST_DIR)/include \
--includedir=$(HOST_DIR)/include \
openocd: bump to version 0.8.0 This patch adds the management of (almost) all the config options of openocd 0.8.0. A BR config variable is added for (almost) every adapter known to openocd and all the dependencies are automatically calculated from the chosen adapters, so only the necessary libraries are built. Note that CMSIS_DAP adapter requires hidapi (not libhid) and hidapi is not actually included in buildroot, so it has been removed. Also zy1000 adapters are actually broken in openocd and have been removed. The host version of the package enables all the possible adapters and the related libraries. [Thomas: - Slightly fixup the commit log. - Rename the patches to the new patch naming convention. - Update hash file using a contribution from Vincent Stehlé. - Move the thread dependency from the OpenOCD option down to each sub-option that actually needs it (when it needs libusb, libusb-compat or libftdi). We keep only one comment, as we would otherwise have to add too many repeatitive comments. - Remove commented options. - Add missing dependency on BR2_ARCH_HAS_ATOMICS when selecting BR2_PACKAGE_LIBFTDI. - Remove trailing white spaces. - Pass -std=gnu99, needed to build with a basic toolchain. - Write the OPENOCD_DEPENDENCIES and OPENOCD_CONF_OPTS conditions in a more compact way. - Adjust indentation for HOST_OPENOCD_CONF_OPTS. - Reword the comment above HOST_OPENOCD_CONF_OPTS.] Signed-off-by: Claudio Laurita <claudio.laurita@integrazionetotale.it> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-14 20:02:17 +01:00
--disable-doxygen-html \
--with-jim-shared=no \
--disable-shared \
openocd: pass --disable-werror to fix build issues Should fix: http://autobuild.buildroot.org/results/91d/91d2ae34f14f1978e0985e75f803055d51201a93/ and similar build problems. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-01-02 20:32:47 +01:00
--enable-dummy \
--disable-werror
openocd: bump to version 0.8.0 This patch adds the management of (almost) all the config options of openocd 0.8.0. A BR config variable is added for (almost) every adapter known to openocd and all the dependencies are automatically calculated from the chosen adapters, so only the necessary libraries are built. Note that CMSIS_DAP adapter requires hidapi (not libhid) and hidapi is not actually included in buildroot, so it has been removed. Also zy1000 adapters are actually broken in openocd and have been removed. The host version of the package enables all the possible adapters and the related libraries. [Thomas: - Slightly fixup the commit log. - Rename the patches to the new patch naming convention. - Update hash file using a contribution from Vincent Stehlé. - Move the thread dependency from the OpenOCD option down to each sub-option that actually needs it (when it needs libusb, libusb-compat or libftdi). We keep only one comment, as we would otherwise have to add too many repeatitive comments. - Remove commented options. - Add missing dependency on BR2_ARCH_HAS_ATOMICS when selecting BR2_PACKAGE_LIBFTDI. - Remove trailing white spaces. - Pass -std=gnu99, needed to build with a basic toolchain. - Write the OPENOCD_DEPENDENCIES and OPENOCD_CONF_OPTS conditions in a more compact way. - Adjust indentation for HOST_OPENOCD_CONF_OPTS. - Reword the comment above HOST_OPENOCD_CONF_OPTS.] Signed-off-by: Claudio Laurita <claudio.laurita@integrazionetotale.it> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-14 20:02:17 +01:00
HOST_OPENOCD_DEPENDENCIES = host-libftdi host-libusb host-libusb-compat
openocd: add host variant Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Luca Ceresoli <luca@lucaceresoli.net> Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-01-28 18:42:54 +01:00
openocd: avoid documentation rebuild to fix build issues On PowerPC64(le), we patch all configure scripts. Due to this, the version.texi in OpenOCD files gets regenerated, and then since it has a newer date than openocd.info, openocd build system rebuilds the documentation. Unfortunately, this documentation rebuild fails on old machines. We work around this by faking the date of the generated version.texi file, to make the build system believe the documentation doesn't need to be regenerated. Fixes: http://autobuild.buildroot.net/results/3cbe65a46e75b8e67846d593884c96df97dec7a4 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-02-26 23:22:16 +01:00
# Avoid documentation rebuild. On PowerPC64(le), we patch the
# configure script. Due to this, the version.texi files gets
# regenerated, and then since it has a newer date than openocd.info,
# openocd build system rebuilds the documentation. Unfortunately, this
# documentation rebuild fails on old machines. We work around this by
# faking the date of the generated version.texi file, to make the
# build system believe the documentation doesn't need to be
# regenerated.
define OPENOCD_FIX_VERSION_TEXI
package/openocd: indentation cleanup Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-03-19 10:59:49 +01:00
touch -r $(@D)/doc/openocd.info $(@D)/doc/version.texi
openocd: avoid documentation rebuild to fix build issues On PowerPC64(le), we patch all configure scripts. Due to this, the version.texi in OpenOCD files gets regenerated, and then since it has a newer date than openocd.info, openocd build system rebuilds the documentation. Unfortunately, this documentation rebuild fails on old machines. We work around this by faking the date of the generated version.texi file, to make the build system believe the documentation doesn't need to be regenerated. Fixes: http://autobuild.buildroot.net/results/3cbe65a46e75b8e67846d593884c96df97dec7a4 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-02-26 23:22:16 +01:00
endef
OPENOCD_POST_BUILD_HOOKS += OPENOCD_FIX_VERSION_TEXI
HOST_OPENOCD_POST_BUILD_HOOKS += OPENOCD_FIX_VERSION_TEXI
all packages: rename XXXTARGETS to xxx-package Also remove the redundant $(call ...). This is a purely mechanical change, performed with find package linux toolchain boot -name \*.mk | \ xargs sed -i -e 's/$(eval $(call GENTARGETS))/$(eval $(generic-package))/' \ -e 's/$(eval $(call AUTOTARGETS))/$(eval $(autotools-package))/' \ -e 's/$(eval $(call CMAKETARGETS))/$(eval $(cmake-package))/' Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-07-03 00:07:32 +02:00
$(eval $(autotools-package))
all packages: use new host-xxx-package macros This is a purely mechanical change, performed with find package linux toolchain boot -name \*.mk | \ xargs sed -i -e 's/$(eval $(call GENTARGETS,host))/$(eval $(host-generic-package))/' \ -e 's/$(eval $(call AUTOTARGETS,host))/$(eval $(host-autotools-package))/' \ -e 's/$(eval $(call CMAKETARGETS,host))/$(eval $(host-cmake-package))/' Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-07-03 00:06:54 +02:00
$(eval $(host-autotools-package))
Reference in New Issue Copy Permalink