# Introduction

This section of the documentation contains important information about the interfaces available on the Kumquat. It will take a closer look at the location and usage of these interfaces.

## Software Setup

For all examples you will need the demonstration image installed on your Kumquat. Please follow the steps below, in order to install it:

1. Download the demonstration-image from [here](https://git.netcubesystems.at/NetCube-Systems-Austria/kumquat-buildroot-releases/releases/tag/demo-build)
2. Install the downloaded image as explained in the [Quickstart](quickstart) guide, and start the Kumquat with a console connection.