NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
ff34b4d60a
kumquat-buildroot/system/Config.in
Eric Le Bihan c2277c2d4e systemd: needs kernel headers >= 3.10 
Systemd needs a toolchain with kernel headers >= 3.10, as it needs
IFLA_VLAN_PROTOCOL from linux/if_link.h.

Fixes: http://autobuild.buildroot.net/results/33e/33e1447949d13bccc4076b69f902432e2131cc1c

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-06-13 22:32:37 +02:00

393 lines
11 KiB
Plaintext
Raw Blame History

menu "System configuration"
config BR2_TARGET_GENERIC_HOSTNAME
string "System hostname"
default "buildroot"
help
Select system hostname to be stored in /etc/hostname.
Leave empty to not create /etc/hostname, or to keep the
one from a custom skeleton.
config BR2_TARGET_GENERIC_ISSUE
string "System banner"
default "Welcome to Buildroot"
help
Select system banner (/etc/issue) to be displayed at login.
Leave empty to not create /etc/issue, or to keep the
one from a custom skeleton.
choice
bool "Passwords encoding"
default BR2_TARGET_GENERIC_PASSWD_MD5
help
Choose the password encoding scheme to use when Buildroot
needs to encode a password (eg. the root password, below).
Note: this is used at build-time, and *not* at runtime.
config BR2_TARGET_GENERIC_PASSWD_DES
bool "des"
help
Use standard 56-bit DES-based crypt(3) to encode passwords.
Old, wildly available, but also the weakest, very susceptible to
brute-force attacks.
config BR2_TARGET_GENERIC_PASSWD_MD5
bool "md5"
help
Use MD5 to encode passwords.
The default. Wildly available, and pretty good.
Although pretty strong, MD5 is now an old hash function, and
suffers from some weaknesses, which makes it susceptible to
brute-force attacks.
config BR2_TARGET_GENERIC_PASSWD_SHA256
bool "sha-256"
help
Use SHA256 to encode passwords.
Very strong, but not ubiquitous, although available in glibc
for some time now. Choose only if you are sure your C library
understands SHA256 passwords.
config BR2_TARGET_GENERIC_PASSWD_SHA512
bool "sha-512"
help
Use SHA512 to encode passwords.
Extremely strong, but not ubiquitous, although available in glibc
for some time now. Choose only if you are sure your C library
understands SHA512 passwords.
endchoice # Passwd encoding
config BR2_TARGET_GENERIC_PASSWD_METHOD
string
default "des" if BR2_TARGET_GENERIC_PASSWD_DES
default "md5" if BR2_TARGET_GENERIC_PASSWD_MD5
default "sha-256" if BR2_TARGET_GENERIC_PASSWD_SHA256
default "sha-512" if BR2_TARGET_GENERIC_PASSWD_SHA512
choice
prompt "Init system"
default BR2_INIT_BUSYBOX
config BR2_INIT_BUSYBOX
bool "BusyBox"
select BR2_PACKAGE_BUSYBOX
config BR2_INIT_SYSV
bool "systemV"
select BR2_PACKAGE_BUSYBOX_SHOW_OTHERS # sysvinit
select BR2_PACKAGE_SYSVINIT
config BR2_INIT_SYSTEMD
bool "systemd"
depends on BR2_PACKAGE_SYSTEMD_ARCH_SUPPORTS
depends on BR2_TOOLCHAIN_USES_GLIBC
depends on BR2_LARGEFILE
depends on BR2_USE_WCHAR
depends on BR2_INET_IPV6
depends on BR2_TOOLCHAIN_HAS_THREADS
depends on BR2_TOOLCHAIN_HAS_SSP
depends on BR2_USE_MMU
depends on !BR2_PREFER_STATIC_LIB
depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10
select BR2_PACKAGE_SYSTEMD
comment 'systemd needs an (e)glibc toolchain, headers >= 3.10'
depends on !(BR2_TOOLCHAIN_USES_GLIBC \
&& BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10)
config BR2_INIT_NONE
bool "None"
endchoice
choice
prompt "/dev management" if !BR2_INIT_SYSTEMD
default BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS
config BR2_ROOTFS_DEVICE_CREATION_STATIC
bool "Static using device table"
config BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS
bool "Dynamic using devtmpfs only"
config BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV
bool "Dynamic using mdev"
select BR2_PACKAGE_BUSYBOX
config BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV
bool "Dynamic using eudev"
depends on !BR2_avr32 # eudev
depends on BR2_LARGEFILE
depends on BR2_USE_WCHAR
depends on !BR2_PREFER_STATIC_LIB
depends on BR2_USE_MMU # eudev
select BR2_PACKAGE_EUDEV
comment "eudev needs a toolchain w/ largefile, wchar, dynamic library"
depends on !BR2_avr32 # eudev
depends on BR2_USE_MMU
depends on !BR2_LARGEFILE || !BR2_USE_WCHAR || BR2_PREFER_STATIC_LIB
endchoice
comment "/dev management using udev (from systemd)"
depends on BR2_INIT_SYSTEMD
config BR2_ROOTFS_DEVICE_TABLE
string "Path to the permission tables"
default "system/device_table.txt"
help
Specify a space-separated list of permission table locations,
that will be passed to the makedevs utility to assign
correct owners and permissions on various files in the
target filesystem.
See package/makedevs/README for details on the usage and
syntax of these files.
config BR2_ROOTFS_STATIC_DEVICE_TABLE
string "Path to the device tables"
default "system/device_table_dev.txt"
depends on BR2_ROOTFS_DEVICE_CREATION_STATIC
help
Specify a space-separated list of device table locations,
that will be passed to the makedevs utility to create all
the special device files under /dev.
See package/makedevs/README for details on the usage and
syntax of these files.
choice
prompt "Root FS skeleton"
config BR2_ROOTFS_SKELETON_DEFAULT
bool "default target skeleton"
help
Use default target skeleton
config BR2_ROOTFS_SKELETON_CUSTOM
bool "custom target skeleton"
help
Use custom target skeleton.
endchoice
if BR2_ROOTFS_SKELETON_CUSTOM
config BR2_ROOTFS_SKELETON_CUSTOM_PATH
string "custom target skeleton path"
default "system/skeleton"
help
Path to custom target skeleton.
endif
if BR2_ROOTFS_SKELETON_DEFAULT
config BR2_TARGET_GENERIC_ROOT_PASSWD
string "Root password"
default ""
help
Set the initial root password (in clear). It will be md5-encrypted.
If set to empty (the default), then no root password will be set,
and root will need no password to log in.
WARNING! WARNING!
Although pretty strong, MD5 is now an old hash function, and
suffers from some weaknesses, which makes it susceptible to attacks.
It is showing its age, so this root password should not be trusted
to properly secure any product that can be shipped to the wide,
hostile world.
WARNING! WARNING!
The password appears in clear in the .config file, and may appear
in the build log! Avoid using a valuable password if either the
.config file or the build log may be distributed!
config BR2_TARGET_GENERIC_GETTY
bool "Run a getty (login prompt) after boot"
default y
if BR2_TARGET_GENERIC_GETTY
menu "getty options"
config BR2_TARGET_GENERIC_GETTY_PORT
string "TTY port"
default "ttyS0"
help
Specify a port to run a getty on.
choice
prompt "Baudrate"
default BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200
help
Select a baudrate to use.
config BR2_TARGET_GENERIC_GETTY_BAUDRATE_KEEP
bool "keep kernel default"
config BR2_TARGET_GENERIC_GETTY_BAUDRATE_9600
bool "9600"
config BR2_TARGET_GENERIC_GETTY_BAUDRATE_19200
bool "19200"
config BR2_TARGET_GENERIC_GETTY_BAUDRATE_38400
bool "38400"
config BR2_TARGET_GENERIC_GETTY_BAUDRATE_57600
bool "57600"
config BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200
bool "115200"
endchoice
config BR2_TARGET_GENERIC_GETTY_BAUDRATE
string
default "0" if BR2_TARGET_GENERIC_GETTY_BAUDRATE_KEEP
default "9600" if BR2_TARGET_GENERIC_GETTY_BAUDRATE_9600
default "19200" if BR2_TARGET_GENERIC_GETTY_BAUDRATE_19200
default "38400" if BR2_TARGET_GENERIC_GETTY_BAUDRATE_38400
default "57600" if BR2_TARGET_GENERIC_GETTY_BAUDRATE_57600
default "115200" if BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200
config BR2_TARGET_GENERIC_GETTY_TERM
string "TERM environment variable"
default "vt100"
help
Specify a TERM type.
config BR2_TARGET_GENERIC_GETTY_OPTIONS
string "other options to pass to getty"
default ""
help
Any other flags you want to pass to getty,
Refer to getty --help for details.
endmenu
endif
config BR2_TARGET_TZ_INFO
bool "Install timezone info"
# No timezone for musl; only for uClibc or (e)glibc.
depends on BR2_TOOLCHAIN_USES_GLIBC || BR2_TOOLCHAIN_USES_UCLIBC
select BR2_PACKAGE_TZDATA if BR2_TOOLCHAIN_USES_GLIBC
select BR2_PACKAGE_TZ if BR2_TOOLCHAIN_USES_UCLIBC
help
Say 'y' here to install timezone info.
if BR2_TARGET_TZ_INFO
config BR2_TARGET_TZ_ZONELIST
string "timezone list"
default "default"
help
Space-separated list of time zones to compile.
The value "default" includes all commonly used time zones. Note
that this set consumes around 5.5M for (e)glibc and 2.1M for uClibc.
The full list is the list of files in the time zone database source,
not including the build and .tab files.
config BR2_TARGET_LOCALTIME
string "default local time"
help
The time zone to install as the default local time, expressed as a
tzdata location, such as:
GMT
Europe/Paris
America/New_York
Pacific/Wallis
...
If empty, no local time will be set, and the dates will be
expressed in UTC.
endif # BR2_TARGET_TZ_INFO
config BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW
bool "remount root filesystem read-write during boot"
default y
help
The root filesystem is typically mounted read-only at boot.
By default, buildroot remounts it in read-write mode early during the
boot process.
Say no here if you would rather like your root filesystem to remain
read-only.
If unsure, say Y.
endif # BR2_ROOTFS_SKELETON_DEFAULT
config BR2_ROOTFS_USERS_TABLES
string "Path to the users tables"
help
Specify a space-separated list of users table locations,
that will be passed to the mkusers utility to create
users on the system, with home directory, password, etc.
See manual for details on the usage and syntax of these files.
config BR2_ROOTFS_OVERLAY
string "Root filesystem overlay directories"
default ""
help
Specify a list of directories that are copied over the target
root filesystem after the build has finished and before it is
packed into the selected filesystem images.
They are copied as-is into the rootfs, excluding files ending with
~ and .git, .svn and .hg directories.
config BR2_ROOTFS_POST_BUILD_SCRIPT
string "Custom scripts to run before creating filesystem images"
default ""
help
Specify a space-separated list of scripts to be run after the build
has finished and before Buildroot starts packing the files into
selected filesystem images.
This gives users the opportunity to do board-specific cleanups,
add-ons and the like, so the generated files can be used directly
without further processing.
These scripts are called with the target directory name as first
argument. Make sure the exit code of those scripts are 0, otherwise
make will stop after calling them.
config BR2_ROOTFS_POST_IMAGE_SCRIPT
string "Custom scripts to run after creating filesystem images"
default ""
help
Specify a space-separated list of scripts to be run after
the build has finished and after Buildroot has packed the
files into selected filesystem images.
This can for example be used to call a tool building a
firmware image from different images generated by Buildroot,
or automatically extract the tarball root filesystem image
into some location exported by NFS, or any other custom
action.
These scripts are called with the images directory name as
first argument. The script is executed from the main Buildroot
source directory as the current directory.
config BR2_ROOTFS_POST_SCRIPT_ARGS
string "Extra post-{build,image} arguments"
depends on BR2_ROOTFS_POST_BUILD_SCRIPT != "" || BR2_ROOTFS_POST_IMAGE_SCRIPT != ""
help
Pass these additional arguments to each post-build or post-image
scripts.
Note that all the post-build and post-image scripts will be passed
the same set of arguments, you can not pass different arguments to
each script.
Note also, as stated in their respective help text, that the first
argument to each post-build or post-image script is the target
directory / images directory. The arguments in this option will be
passed *after* those.
endmenu
Reference in New Issue View Git Blame Copy Permalink