7b02ca842d
Add support for PineCube with: - U-Boot 2022.04 - Linux 5.15.61 PineCube is a low-powered, open source IP camera with the following specs: - Allwinner S3 Cortex-A7 - 128 MiB DDR3 - 16 MiB SPI flash - 5 MPx OV5640 camera - MicroSD slot - 10/100M Ethernet with passive PoE - 802.11 b/g/n WiFi - Bluetooth 4.1 - USB 2.0 - 26 pins GPIO header - Microphone - IR LEDs for night vision Board homepage: https://www.pine64.org/cube/ Board wiki: https://wiki.pine64.org/wiki/PineCube Signed-off-by: Jan Havran <havran.jan@email.cz> Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
46 lines
1.3 KiB
Plaintext
46 lines
1.3 KiB
Plaintext
# Target options
|
|
BR2_arm=y
|
|
BR2_cortex_a7=y
|
|
BR2_ARM_FPU_VFPV4=y
|
|
|
|
# Toolchain options
|
|
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
|
|
|
|
# System configuration
|
|
BR2_TARGET_GENERIC_HOSTNAME="pinecube"
|
|
BR2_TARGET_GENERIC_ISSUE="Welcome to Pine64 Pinecube"
|
|
BR2_SYSTEM_DHCP="eth0"
|
|
BR2_ROOTFS_POST_BUILD_SCRIPT="board/pine64/pinecube/post-build.sh"
|
|
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
|
|
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pine64/pinecube/genimage.cfg"
|
|
|
|
# Kernel
|
|
BR2_LINUX_KERNEL=y
|
|
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
|
|
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.61"
|
|
BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
|
|
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
|
BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-s3-pinecube"
|
|
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
|
|
|
|
# Filesystem
|
|
BR2_TARGET_ROOTFS_EXT2=y
|
|
BR2_TARGET_ROOTFS_EXT2_4=y
|
|
|
|
# Bootloader
|
|
BR2_TARGET_UBOOT=y
|
|
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
|
|
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
|
|
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04"
|
|
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="pinecube"
|
|
BR2_TARGET_UBOOT_NEEDS_DTC=y
|
|
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
|
|
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
|
|
BR2_TARGET_UBOOT_SPL=y
|
|
BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
|
|
|
|
# Required host utilities for building an SDCard image
|
|
BR2_PACKAGE_HOST_DOSFSTOOLS=y
|
|
BR2_PACKAGE_HOST_GENIMAGE=y
|
|
BR2_PACKAGE_HOST_MTOOLS=y
|