kumquat-buildroot/Makefile
Cody P Schafer 7e674dfa4f powerpc: add powerpc64 and powerpc64le support
This enables powerpc64 and powerpc64le. Currently, le needs at least
glibc 2.19 and gcc 4.9.0. For gdb, 7.7.1 works (added in an earlier
patch).

[Peter: also disallow gcc 4.8 for ppc64le]
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-26 21:48:33 +02:00

938 lines
34 KiB
Makefile

# Makefile for buildroot
#
# Copyright (C) 1999-2005 by Erik Andersen <andersen@codepoet.org>
# Copyright (C) 2006-2014 by the Buildroot developers <buildroot@uclibc.org>
# Copyright (C) 2014 by the Buildroot developers <buildroot@buildroot.org>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
#--------------------------------------------------------------
# Just run 'make menuconfig', configure stuff, then run 'make'.
# You shouldn't need to mess with anything beyond this point...
#--------------------------------------------------------------
# Set and export the version string
export BR2_VERSION := 2014.05-rc1
# Check for minimal make version (note: this check will break at make 10.x)
MIN_MAKE_VERSION = 3.81
ifneq ($(firstword $(sort $(MAKE_VERSION) $(MIN_MAKE_VERSION))),$(MIN_MAKE_VERSION))
$(error You have make '$(MAKE_VERSION)' installed. GNU make >= $(MIN_MAKE_VERSION) is required)
endif
export HOSTARCH := $(shell uname -m | \
sed -e s/i.86/x86/ \
-e s/sun4u/sparc64/ \
-e s/arm.*/arm/ \
-e s/sa110/arm/ \
-e s/ppc64/powerpc64/ \
-e s/ppc/powerpc/ \
-e s/macppc/powerpc/\
-e s/sh.*/sh/)
# Parallel execution of this Makefile is disabled because it changes
# the packages building order, that can be a problem for two reasons:
# - If a package has an unspecified optional dependency and that
# dependency is present when the package is built, it is used,
# otherwise it isn't (but compilation happily proceeds) so the end
# result will differ if the order is swapped due to parallel
# building.
# - Also changing the building order can be a problem if two packages
# manipulate the same file in the target directory.
#
# Taking into account the above considerations, if you still want to execute
# this top-level Makefile in parallel comment the ".NOTPARALLEL" line and
# build using the following command:
# make BR2_JLEVEL= -j$((`getconf _NPROCESSORS_ONLN`+1))
.NOTPARALLEL:
# absolute path
TOPDIR := $(shell pwd)
CONFIG_CONFIG_IN = Config.in
CONFIG = support/kconfig
DATE := $(shell date +%Y%m%d)
# Compute the full local version string so packages can use it as-is
# Need to export it, so it can be got from environment in children (eg. mconf)
export BR2_VERSION_FULL := $(BR2_VERSION)$(shell $(TOPDIR)/support/scripts/setlocalversion)
noconfig_targets := menuconfig nconfig gconfig xconfig config oldconfig randconfig \
defconfig %_defconfig allyesconfig allnoconfig silentoldconfig release \
randpackageconfig allyespackageconfig allnopackageconfig \
source-check print-version olddefconfig
# Strip quotes and then whitespaces
qstrip = $(strip $(subst ",,$(1)))
#"))
# Variables for use in Make constructs
comma := ,
empty :=
space := $(empty) $(empty)
ifneq ("$(origin O)", "command line")
O := output
CONFIG_DIR := $(TOPDIR)
NEED_WRAPPER =
else
# other packages might also support Linux-style out of tree builds
# with the O=<dir> syntax (E.G. Busybox does). As make automatically
# forwards command line variable definitions those packages get very
# confused. Fix this by telling make to not do so
MAKEOVERRIDES =
# strangely enough O is still passed to submakes with MAKEOVERRIDES
# (with make 3.81 atleast), the only thing that changes is the output
# of the origin function (command line -> environment).
# Unfortunately some packages don't look at origin (E.G. uClibc 0.9.31+)
# To really make O go away, we have to override it.
override O := $(O)
CONFIG_DIR := $(O)
# we need to pass O= everywhere we call back into the toplevel makefile
EXTRAMAKEARGS = O=$(O)
NEED_WRAPPER = y
endif
# bash prints the name of the directory on 'cd <dir>' if CDPATH is
# set, so unset it here to not cause problems. Notice that the export
# line doesn't affect the environment of $(shell ..) calls, so
# explictly throw away any output from 'cd' here.
export CDPATH :=
BASE_DIR := $(shell mkdir -p $(O) && cd $(O) >/dev/null && pwd)
$(if $(BASE_DIR),, $(error output directory "$(O)" does not exist))
# Handling of BR2_EXTERNAL.
#
# The value of BR2_EXTERNAL is stored in .br-external in the output directory.
# On subsequent invocations of make, it is read in. It can still be overridden
# on the command line, therefore the file is re-created every time make is run.
#
# When BR2_EXTERNAL is not set, the .br-external file is removed and we point
# to support/dummy-external. This makes sure we can unconditionally include the
# Config.in and external.mk from the BR2_EXTERNAL directory. In this case,
# override is necessary so the user can clear BR2_EXTERNAL from the command
# line, but the dummy path is still used internally.
BR2_EXTERNAL_FILE = $(BASE_DIR)/.br-external
-include $(BR2_EXTERNAL_FILE)
ifeq ($(BR2_EXTERNAL),)
override BR2_EXTERNAL = support/dummy-external
$(shell rm -f $(BR2_EXTERNAL_FILE))
else
_BR2_EXTERNAL = $(shell cd $(BR2_EXTERNAL) >/dev/null 2>&1 && pwd)
ifeq ($(_BR2_EXTERNAL),)
$(error BR2_EXTERNAL='$(BR2_EXTERNAL)' does not exist, relative to $(TOPDIR))
endif
override BR2_EXTERNAL := $(_BR2_EXTERNAL)
$(shell echo BR2_EXTERNAL ?= $(BR2_EXTERNAL) > $(BR2_EXTERNAL_FILE))
endif
# To make sure the the environment variable overrides the .config option,
# set this before including .config.
ifneq ($(BR2_DL_DIR),)
DL_DIR := $(BR2_DL_DIR)
endif
# Need that early, before we scan packages
# Avoids doing the $(or...) everytime
BR_GRAPH_OUT := $(or $(BR2_GRAPH_OUT),pdf)
BR_GRAPH_DEPTH := $(or $(BR2_GRAPH_DEPTH),0)
BUILD_DIR := $(BASE_DIR)/build
BINARIES_DIR := $(BASE_DIR)/images
TARGET_DIR := $(BASE_DIR)/target
# initial definition so that 'make clean' works for most users, even without
# .config. HOST_DIR will be overwritten later when .config is included.
HOST_DIR := $(BASE_DIR)/host
LEGAL_INFO_DIR = $(BASE_DIR)/legal-info
REDIST_SOURCES_DIR_TARGET = $(LEGAL_INFO_DIR)/sources
REDIST_SOURCES_DIR_HOST = $(LEGAL_INFO_DIR)/host-sources
LICENSE_FILES_DIR_TARGET = $(LEGAL_INFO_DIR)/licenses
LICENSE_FILES_DIR_HOST = $(LEGAL_INFO_DIR)/host-licenses
LEGAL_MANIFEST_CSV_TARGET = $(LEGAL_INFO_DIR)/manifest.csv
LEGAL_MANIFEST_CSV_HOST = $(LEGAL_INFO_DIR)/host-manifest.csv
LEGAL_LICENSES_TXT_TARGET = $(LEGAL_INFO_DIR)/licenses.txt
LEGAL_LICENSES_TXT_HOST = $(LEGAL_INFO_DIR)/host-licenses.txt
LEGAL_WARNINGS = $(LEGAL_INFO_DIR)/.warnings
LEGAL_REPORT = $(LEGAL_INFO_DIR)/README
BR2_CONFIG = $(CONFIG_DIR)/.config
# Pull in the user's configuration file
ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),)
-include $(BR2_CONFIG)
endif
# To put more focus on warnings, be less verbose as default
# Use 'make V=1' to see the full commands
ifdef V
ifeq ("$(origin V)", "command line")
KBUILD_VERBOSE = $(V)
endif
endif
ifndef KBUILD_VERBOSE
KBUILD_VERBOSE = 0
endif
ifeq ($(KBUILD_VERBOSE),1)
quiet =
Q =
ifndef VERBOSE
VERBOSE = 1
endif
else
quiet = quiet_
Q = @
endif
# we want bash as shell
SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
else if [ -x /bin/bash ]; then echo /bin/bash; \
else echo sh; fi; fi)
# kconfig uses CONFIG_SHELL
CONFIG_SHELL := $(SHELL)
export SHELL CONFIG_SHELL quiet Q KBUILD_VERBOSE VERBOSE
ifndef HOSTAR
HOSTAR := ar
endif
ifndef HOSTAS
HOSTAS := as
endif
ifndef HOSTCC
HOSTCC := gcc
HOSTCC := $(shell which $(HOSTCC) || type -p $(HOSTCC) || echo gcc)
endif
HOSTCC_NOCCACHE := $(HOSTCC)
ifndef HOSTCXX
HOSTCXX := g++
HOSTCXX := $(shell which $(HOSTCXX) || type -p $(HOSTCXX) || echo g++)
endif
HOSTCXX_NOCCACHE := $(HOSTCXX)
ifndef HOSTFC
HOSTFC := gfortran
endif
ifndef HOSTCPP
HOSTCPP := cpp
endif
ifndef HOSTLD
HOSTLD := ld
endif
ifndef HOSTLN
HOSTLN := ln
endif
ifndef HOSTNM
HOSTNM := nm
endif
ifndef HOSTOBJCOPY
HOSTOBJCOPY := objcopy
endif
ifndef HOSTRANLIB
HOSTRANLIB := ranlib
endif
HOSTAR := $(shell which $(HOSTAR) || type -p $(HOSTAR) || echo ar)
HOSTAS := $(shell which $(HOSTAS) || type -p $(HOSTAS) || echo as)
HOSTFC := $(shell which $(HOSTLD) || type -p $(HOSTLD) || echo || which g77 || type -p g77 || echo gfortran)
HOSTCPP := $(shell which $(HOSTCPP) || type -p $(HOSTCPP) || echo cpp)
HOSTLD := $(shell which $(HOSTLD) || type -p $(HOSTLD) || echo ld)
HOSTLN := $(shell which $(HOSTLN) || type -p $(HOSTLN) || echo ln)
HOSTNM := $(shell which $(HOSTNM) || type -p $(HOSTNM) || echo nm)
HOSTOBJCOPY := $(shell which $(HOSTOBJCOPY) || type -p $(HOSTOBJCOPY) || echo objcopy)
HOSTRANLIB := $(shell which $(HOSTRANLIB) || type -p $(HOSTRANLIB) || echo ranlib)
export HOSTAR HOSTAS HOSTCC HOSTCXX HOSTFC HOSTLD
export HOSTCC_NOCCACHE HOSTCXX_NOCCACHE
# Make sure pkg-config doesn't look outside the buildroot tree
unexport PKG_CONFIG_PATH
unexport PKG_CONFIG_SYSROOT_DIR
unexport PKG_CONFIG_LIBDIR
# Having DESTDIR set in the environment confuses the installation
# steps of some packages.
unexport DESTDIR
# Causes breakage with packages that needs host-ruby
unexport RUBYOPT
ifeq ($(BR2_HAVE_DOT_CONFIG),y)
################################################################################
#
# Hide troublesome environment variables from sub processes
#
################################################################################
unexport CROSS_COMPILE
unexport ARCH
unexport CC
unexport CXX
unexport CPP
unexport CFLAGS
unexport CXXFLAGS
unexport GREP_OPTIONS
unexport TAR_OPTIONS
unexport CONFIG_SITE
unexport QMAKESPEC
unexport TERMINFO
GNU_HOST_NAME := $(shell support/gnuconfig/config.guess)
TARGETS :=
# silent mode requested?
QUIET := $(if $(findstring s,$(MAKEFLAGS)),-q)
# Strip off the annoying quoting
ARCH := $(call qstrip,$(BR2_ARCH))
KERNEL_ARCH := $(shell echo "$(ARCH)" | sed -e "s/-.*//" \
-e s/i.86/i386/ -e s/sun4u/sparc64/ \
-e s/arcle/arc/ \
-e s/arceb/arc/ \
-e s/arm.*/arm/ -e s/sa110/arm/ \
-e s/aarch64/arm64/ \
-e s/bfin/blackfin/ \
-e s/parisc64/parisc/ \
-e s/powerpc64.*/powerpc/ \
-e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
-e s/sh.*/sh/ \
-e s/microblazeel/microblaze/)
ZCAT := $(call qstrip,$(BR2_ZCAT))
BZCAT := $(call qstrip,$(BR2_BZCAT))
XZCAT := $(call qstrip,$(BR2_XZCAT))
TAR_OPTIONS = $(call qstrip,$(BR2_TAR_OPTIONS)) -xf
# packages compiled for the host go here
HOST_DIR := $(call qstrip,$(BR2_HOST_DIR))
# Quotes are needed for spaces and all in the original PATH content.
BR_PATH = "$(HOST_DIR)/bin:$(HOST_DIR)/sbin:$(HOST_DIR)/usr/bin:$(HOST_DIR)/usr/sbin:$(PATH)"
# locales to generate
GENERATE_LOCALE = $(call qstrip,$(BR2_GENERATE_LOCALE))
TARGET_SKELETON = $(TOPDIR)/system/skeleton
# Location of a file giving a big fat warning that output/target
# should not be used as the root filesystem.
TARGET_DIR_WARNING_FILE = $(TARGET_DIR)/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM
ifeq ($(BR2_CCACHE),y)
CCACHE := $(HOST_DIR)/usr/bin/ccache
BR_CACHE_DIR = $(call qstrip,$(BR2_CCACHE_DIR))
export BR_CACHE_DIR
HOSTCC := $(CCACHE) $(HOSTCC)
HOSTCXX := $(CCACHE) $(HOSTCXX)
endif
# Scripts in support/ or post-build scripts may need to reference
# these locations, so export them so it is easier to use
export BR2_CONFIG
export TARGET_DIR
export STAGING_DIR
export HOST_DIR
export BINARIES_DIR
export BASE_DIR
################################################################################
#
# You should probably leave this stuff alone unless you know
# what you are doing.
#
################################################################################
all: world
# Include legacy before the other things, because package .mk files
# may rely on it.
ifneq ($(BR2_DEPRECATED),y)
include Makefile.legacy
endif
include package/Makefile.in
include support/dependencies/dependencies.mk
# We also need the various per-package makefiles, which also add
# each selected package to TARGETS if that package was selected
# in the .config file.
include toolchain/helpers.mk
include toolchain/*/*.mk
# Include the package override file if one has been provided in the
# configuration.
PACKAGE_OVERRIDE_FILE = $(call qstrip,$(BR2_PACKAGE_OVERRIDE_FILE))
ifneq ($(PACKAGE_OVERRIDE_FILE),)
-include $(PACKAGE_OVERRIDE_FILE)
endif
include $(sort $(wildcard package/*/*.mk))
include boot/common.mk
include linux/linux.mk
include system/system.mk
include $(BR2_EXTERNAL)/external.mk
ifeq ($(BR2_TOOLCHAIN_USES_GLIBC),y)
ifneq ($(GENERATE_LOCALE),)
TARGETS += target-generatelocales
endif
endif
ifeq ($(BR2_ECLIPSE_REGISTER),y)
TARGETS += toolchain-eclipse-register
endif
include fs/common.mk
TARGETS_SOURCE := $(patsubst %,%-source,$(TARGETS))
TARGETS_DIRCLEAN := $(patsubst %,%-dirclean,$(TARGETS))
# host-* dependencies have to be handled specially, as those aren't
# visible in Kconfig and hence not added to a variable like TARGETS.
# instead, find all the host-* targets listed in each <PKG>_DEPENDENCIES
# variable for each enabled target.
# Notice: this only works for newstyle gentargets/autotargets packages
TARGETS_HOST_DEPS = $(sort $(filter host-%,$(foreach dep,\
$(addsuffix _DEPENDENCIES,\
$(call UPPERCASE,$(TARGETS) $(TARGETS_ROOTFS))),\
$($(dep)))))
# Host packages can in turn have their own dependencies. Likewise find
# all the package names listed in the HOST_<PKG>_DEPENDENCIES for each
# host package found above. Ideally this should be done recursively until
# no more packages are found, but that's hard to do in make, so limit to
# 1 level for now.
HOST_DEPS = $(sort $(foreach dep,\
$(addsuffix _DEPENDENCIES,$(call UPPERCASE,$(TARGETS_HOST_DEPS))),\
$($(dep))))
HOST_SOURCE += $(addsuffix -source,$(sort $(TARGETS_HOST_DEPS) $(HOST_DEPS)))
TARGETS_LEGAL_INFO := $(patsubst %,%-legal-info,\
$(TARGETS) $(TARGETS_HOST_DEPS) $(HOST_DEPS))))
dirs: $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
$(HOST_DIR) $(BINARIES_DIR)
$(BUILD_DIR)/buildroot-config/auto.conf: $(BR2_CONFIG)
$(MAKE1) $(EXTRAMAKEARGS) HOSTCC="$(HOSTCC_NOCCACHE)" HOSTCXX="$(HOSTCXX_NOCCACHE)" silentoldconfig
prepare: $(BUILD_DIR)/buildroot-config/auto.conf
# Add base dependencies to all targets even on those not based on the
# package framework.
$(TARGETS): dirs prepare dependencies
world: target-post-image
.PHONY: all world toolchain dirs clean distclean source outputmakefile \
legal-info legal-info-prepare legal-info-clean printvars \
target-finalize target-post-image \
$(TARGETS) $(TARGETS_ROOTFS) \
$(TARGETS_DIRCLEAN) $(TARGETS_SOURCE) $(TARGETS_LEGAL_INFO) \
$(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
$(HOST_DIR) $(BINARIES_DIR)
################################################################################
#
# staging and target directories do NOT list these as
# dependencies anywhere else
#
################################################################################
$(BUILD_DIR) $(HOST_DIR) $(BINARIES_DIR) $(LEGAL_INFO_DIR) $(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST):
@mkdir -p $@
# We make a symlink lib32->lib or lib64->lib as appropriate
# MIPS64/n32 requires lib32 even though it's a 64-bit arch.
ifeq ($(BR2_ARCH_IS_64)$(BR2_MIPS_NABI32),y)
LIB_SYMLINK = lib64
else
LIB_SYMLINK = lib32
endif
$(STAGING_DIR):
@mkdir -p $(STAGING_DIR)/bin
@mkdir -p $(STAGING_DIR)/lib
@ln -snf lib $(STAGING_DIR)/$(LIB_SYMLINK)
@mkdir -p $(STAGING_DIR)/usr/lib
@ln -snf lib $(STAGING_DIR)/usr/$(LIB_SYMLINK)
@mkdir -p $(STAGING_DIR)/usr/include
@mkdir -p $(STAGING_DIR)/usr/bin
@ln -snf $(STAGING_DIR) $(BASE_DIR)/staging
ifeq ($(BR2_ROOTFS_SKELETON_CUSTOM),y)
TARGET_SKELETON = $(BR2_ROOTFS_SKELETON_CUSTOM_PATH)
endif
RSYNC_VCS_EXCLUSIONS = \
--exclude .svn --exclude .git --exclude .hg --exclude .bzr \
--exclude CVS
$(BUILD_DIR)/.root:
mkdir -p $(TARGET_DIR)
rsync -a --ignore-times $(RSYNC_VCS_EXCLUSIONS) \
--chmod=Du+w --exclude .empty --exclude '*~' \
$(TARGET_SKELETON)/ $(TARGET_DIR)/
$(INSTALL) -m 0644 support/misc/target-dir-warning.txt $(TARGET_DIR_WARNING_FILE)
@ln -snf lib $(TARGET_DIR)/$(LIB_SYMLINK)
@mkdir -p $(TARGET_DIR)/usr
@ln -snf lib $(TARGET_DIR)/usr/$(LIB_SYMLINK)
touch $@
$(TARGET_DIR): $(BUILD_DIR)/.root
STRIP_FIND_CMD = find $(TARGET_DIR)
ifneq (,$(call qstrip,$(BR2_STRIP_EXCLUDE_DIRS)))
STRIP_FIND_CMD += \( $(call finddirclauses,$(TARGET_DIR),$(call qstrip,$(BR2_STRIP_EXCLUDE_DIRS))) \) -prune -o
endif
STRIP_FIND_CMD += -type f \( -perm /111 -o -name '*.so*' \)
# file exclusions:
# - libpthread.so: a non-stripped libpthread shared library is needed for
# proper debugging of pthread programs using gdb.
# - kernel modules (*.ko): do not function properly when stripped like normal
# applications and libraries. Normally kernel modules are already excluded
# by the executable permission check above, so the explicit exclusion is only
# done for kernel modules with incorrect permissions.
STRIP_FIND_CMD += -not \( $(call findfileclauses,libpthread*.so* *.ko $(call qstrip,$(BR2_STRIP_EXCLUDE_FILES))) \) -print
ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
LOCALE_WHITELIST = $(BUILD_DIR)/locales.nopurge
LOCALE_NOPURGE = $(call qstrip,$(BR2_ENABLE_LOCALE_WHITELIST))
define TARGET_PURGE_LOCALES
rm -f $(LOCALE_WHITELIST)
for i in $(LOCALE_NOPURGE); do echo $$i >> $(LOCALE_WHITELIST); done
for dir in $(wildcard $(addprefix $(TARGET_DIR),/usr/share/locale /usr/share/X11/locale /usr/man /usr/share/man /usr/lib/locale)); \
do \
for lang in $$(cd $$dir; ls .|grep -v man); \
do \
grep -qx $$lang $(LOCALE_WHITELIST) || rm -rf $$dir/$$lang; \
done; \
done
endef
endif
$(TARGETS_ROOTFS): target-finalize
target-finalize: $(TARGETS)
@$(call MESSAGE,"Finalizing target directory")
$(TARGET_PURGE_LOCALES)
rm -rf $(TARGET_DIR)/usr/include $(TARGET_DIR)/usr/share/aclocal \
$(TARGET_DIR)/usr/lib/pkgconfig $(TARGET_DIR)/usr/share/pkgconfig \
$(TARGET_DIR)/usr/lib/cmake $(TARGET_DIR)/usr/share/cmake
find $(TARGET_DIR)/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f
find $(TARGET_DIR)/lib \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
find $(TARGET_DIR)/usr/lib \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
ifneq ($(BR2_PACKAGE_GDB),y)
rm -rf $(TARGET_DIR)/usr/share/gdb
endif
rm -rf $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/man
rm -rf $(TARGET_DIR)/usr/info $(TARGET_DIR)/usr/share/info
rm -rf $(TARGET_DIR)/usr/doc $(TARGET_DIR)/usr/share/doc
rm -rf $(TARGET_DIR)/usr/share/gtk-doc
-rmdir $(TARGET_DIR)/usr/share 2>/dev/null
ifeq ($(BR2_PACKAGE_PYTHON_PY_ONLY)$(BR2_PACKAGE_PYTHON3_PY_ONLY),y)
find $(TARGET_DIR)/usr/lib/ -name '*.pyc' -print0 | xargs -0 rm -f
endif
ifeq ($(BR2_PACKAGE_PYTHON_PYC_ONLY)$(BR2_PACKAGE_PYTHON3_PYC_ONLY),y)
find $(TARGET_DIR)/usr/lib/ -name '*.py' -print0 | xargs -0 rm -f
endif
rm -rf $(TARGET_DIR)/usr/lib/luarocks
$(STRIP_FIND_CMD) | xargs $(STRIPCMD) 2>/dev/null || true
if test -d $(TARGET_DIR)/lib/modules; then \
find $(TARGET_DIR)/lib/modules -type f -name '*.ko' | \
xargs -r $(KSTRIPCMD); fi
# See http://sourceware.org/gdb/wiki/FAQ, "GDB does not see any threads
# besides the one in which crash occurred; or SIGTRAP kills my program when
# I set a breakpoint"
ifeq ($(BR2_TOOLCHAIN_HAS_THREADS),y)
find $(TARGET_DIR)/lib -type f -name 'libpthread*.so*' | \
xargs -r $(STRIPCMD) $(STRIP_STRIP_DEBUG)
endif
mkdir -p $(TARGET_DIR)/etc
# Mandatory configuration file and auxilliary cache directory
# for recent versions of ldconfig
touch $(TARGET_DIR)/etc/ld.so.conf
mkdir -p $(TARGET_DIR)/var/cache/ldconfig
if [ -x "$(TARGET_CROSS)ldconfig" ]; \
then \
$(TARGET_CROSS)ldconfig -r $(TARGET_DIR); \
else \
/sbin/ldconfig -r $(TARGET_DIR); \
fi
( \
echo "NAME=Buildroot"; \
echo "VERSION=$(BR2_VERSION_FULL)"; \
echo "ID=buildroot"; \
echo "VERSION_ID=$(BR2_VERSION)"; \
echo "PRETTY_NAME=\"Buildroot $(BR2_VERSION)\"" \
) > $(TARGET_DIR)/etc/os-release
@$(foreach d, $(call qstrip,$(BR2_ROOTFS_OVERLAY)), \
$(call MESSAGE,"Copying overlay $(d)"); \
rsync -a --ignore-times $(RSYNC_VCS_EXCLUSIONS) \
--chmod=Du+w --exclude .empty --exclude '*~' \
$(d)/ $(TARGET_DIR)$(sep))
@$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_BUILD_SCRIPT)), \
$(call MESSAGE,"Executing post-build script $(s)"); \
$(EXTRA_ENV) $(s) $(TARGET_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))
ifneq ($(GENERATE_LOCALE),)
# Generate locale data. Basically, we call the localedef program
# (built by the host-localedef package) for each locale. The input
# data comes preferably from the toolchain, or if the toolchain does
# not have them (Linaro toolchains), we use the ones available on the
# host machine.
target-generatelocales: host-localedef toolchain
$(Q)mkdir -p $(TARGET_DIR)/usr/lib/locale/
$(Q)for locale in $(GENERATE_LOCALE) ; do \
inputfile=`echo $${locale} | cut -f1 -d'.'` ; \
charmap=`echo $${locale} | cut -f2 -d'.' -s` ; \
if test -z "$${charmap}" ; then \
charmap="UTF-8" ; \
fi ; \
echo "Generating locale $${inputfile}.$${charmap}" ; \
I18NPATH=$(STAGING_DIR)/usr/share/i18n:/usr/share/i18n \
$(HOST_DIR)/usr/bin/localedef \
--prefix=$(TARGET_DIR) \
--$(call LOWERCASE,$(BR2_ENDIAN))-endian \
-i $${inputfile} -f $${charmap} \
$${locale} ; \
done
endif
target-post-image: $(TARGETS_ROOTFS) target-finalize
@$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_IMAGE_SCRIPT)), \
$(call MESSAGE,"Executing post-image script $(s)"); \
$(EXTRA_ENV) $(s) $(BINARIES_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))
toolchain-eclipse-register: toolchain
./support/scripts/eclipse-register-toolchain `readlink -f $(O)` $(notdir $(TARGET_CROSS)) $(BR2_ARCH)
source: $(TARGETS_SOURCE) $(HOST_SOURCE)
external-deps:
@$(MAKE1) -Bs DL_MODE=SHOW_EXTERNAL_DEPS $(EXTRAMAKEARGS) source | sort -u
legal-info-clean:
@rm -fr $(LEGAL_INFO_DIR)
legal-info-prepare: $(LEGAL_INFO_DIR)
@$(call MESSAGE,"Collecting legal info")
@$(call legal-license-file,buildroot,COPYING,COPYING,HOST)
@$(call legal-manifest,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,TARGET)
@$(call legal-manifest,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,HOST)
@$(call legal-manifest,buildroot,$(BR2_VERSION_FULL),GPLv2+,COPYING,not saved,HOST)
@$(call legal-warning,the Buildroot source code has not been saved)
@$(call legal-warning,the toolchain has not been saved)
@cp $(BR2_CONFIG) $(LEGAL_INFO_DIR)/buildroot.config
legal-info: dirs legal-info-clean legal-info-prepare $(TARGETS_LEGAL_INFO) \
$(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST)
@cat support/legal-info/README.header >>$(LEGAL_REPORT)
@if [ -r $(LEGAL_WARNINGS) ]; then \
cat support/legal-info/README.warnings-header \
$(LEGAL_WARNINGS) >>$(LEGAL_REPORT); \
cat $(LEGAL_WARNINGS); fi
@echo "Legal info produced in $(LEGAL_INFO_DIR)"
@rm -f $(LEGAL_WARNINGS)
show-targets:
@echo $(HOST_DEPS) $(TARGETS_HOST_DEPS) $(TARGETS) $(TARGETS_ROOTFS)
graph-build: $(O)/build/build-time.log
@install -d $(O)/graphs
$(foreach o,name build duration,./support/scripts/graph-build-time \
--type=histogram --order=$(o) --input=$(<) \
--output=$(O)/graphs/build.hist-$(o).$(BR_GRAPH_OUT) \
$(if $(BR2_GRAPH_ALT),--alternate-colors)$(sep))
$(foreach t,packages steps,./support/scripts/graph-build-time \
--type=pie-$(t) --input=$(<) \
--output=$(O)/graphs/build.pie-$(t).$(BR_GRAPH_OUT) \
$(if $(BR2_GRAPH_ALT),--alternate-colors)$(sep))
graph-depends:
@$(INSTALL) -d $(O)/graphs
@cd "$(CONFIG_DIR)"; \
$(TOPDIR)/support/scripts/graph-depends -d $(BR_GRAPH_DEPTH) \
|tee $(O)/graphs/$(@).dot \
|dot -T$(BR_GRAPH_OUT) -o $(O)/graphs/$(@).$(BR_GRAPH_OUT)
else # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
all: menuconfig
endif # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
# configuration
# ---------------------------------------------------------------------------
HOSTCFLAGS = $(CFLAGS_FOR_BUILD)
export HOSTCFLAGS
$(BUILD_DIR)/buildroot-config/%onf:
mkdir -p $(@D)/lxdialog
$(MAKE) CC="$(HOSTCC_NOCCACHE)" HOSTCC="$(HOSTCC_NOCCACHE)" obj=$(@D) -C $(CONFIG) -f Makefile.br $(@F)
DEFCONFIG = $(call qstrip,$(BR2_DEFCONFIG))
# We don't want to fully expand BR2_DEFCONFIG here, so Kconfig will
# recognize that if it's still at its default $(CONFIG_DIR)/defconfig
COMMON_CONFIG_ENV = \
BR2_DEFCONFIG='$(call qstrip,$(value BR2_DEFCONFIG))' \
KCONFIG_AUTOCONFIG=$(BUILD_DIR)/buildroot-config/auto.conf \
KCONFIG_AUTOHEADER=$(BUILD_DIR)/buildroot-config/autoconf.h \
KCONFIG_TRISTATE=$(BUILD_DIR)/buildroot-config/tristate.config \
BR2_CONFIG=$(BR2_CONFIG) \
BR2_EXTERNAL=$(BR2_EXTERNAL)
xconfig: $(BUILD_DIR)/buildroot-config/qconf outputmakefile
@mkdir -p $(BUILD_DIR)/buildroot-config
@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
gconfig: $(BUILD_DIR)/buildroot-config/gconf outputmakefile
@mkdir -p $(BUILD_DIR)/buildroot-config
@$(COMMON_CONFIG_ENV) srctree=$(TOPDIR) $< $(CONFIG_CONFIG_IN)
menuconfig: $(BUILD_DIR)/buildroot-config/mconf outputmakefile
@mkdir -p $(BUILD_DIR)/buildroot-config
@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
nconfig: $(BUILD_DIR)/buildroot-config/nconf outputmakefile
@mkdir -p $(BUILD_DIR)/buildroot-config
@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
config: $(BUILD_DIR)/buildroot-config/conf outputmakefile
@mkdir -p $(BUILD_DIR)/buildroot-config
@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
oldconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
mkdir -p $(BUILD_DIR)/buildroot-config
@$(COMMON_CONFIG_ENV) $< --oldconfig $(CONFIG_CONFIG_IN)
randconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
@mkdir -p $(BUILD_DIR)/buildroot-config
@$(COMMON_CONFIG_ENV) $< --randconfig $(CONFIG_CONFIG_IN)
allyesconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
@mkdir -p $(BUILD_DIR)/buildroot-config
@$(COMMON_CONFIG_ENV) $< --allyesconfig $(CONFIG_CONFIG_IN)
allnoconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
@mkdir -p $(BUILD_DIR)/buildroot-config
@$(COMMON_CONFIG_ENV) $< --allnoconfig $(CONFIG_CONFIG_IN)
randpackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
@mkdir -p $(BUILD_DIR)/buildroot-config
@grep -v BR2_PACKAGE_ $(BR2_CONFIG) > $(CONFIG_DIR)/.config.nopkg
@grep '^config BR2_PACKAGE_' Config.in.legacy | \
while read config pkg; do \
echo "# $$pkg is not set" >> $(CONFIG_DIR)/.config.nopkg; done
@$(COMMON_CONFIG_ENV) \
KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
$< --randconfig $(CONFIG_CONFIG_IN)
@rm -f $(CONFIG_DIR)/.config.nopkg
allyespackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
@mkdir -p $(BUILD_DIR)/buildroot-config
@grep -v BR2_PACKAGE_ $(BR2_CONFIG) > $(CONFIG_DIR)/.config.nopkg
@grep '^config BR2_PACKAGE_' Config.in.legacy | \
while read config pkg; do \
echo "# $$pkg is not set" >> $(CONFIG_DIR)/.config.nopkg; done
@$(COMMON_CONFIG_ENV) \
KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
$< --allyesconfig $(CONFIG_CONFIG_IN)
@rm -f $(CONFIG_DIR)/.config.nopkg
allnopackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
@mkdir -p $(BUILD_DIR)/buildroot-config
@grep -v BR2_PACKAGE_ $(BR2_CONFIG) > $(CONFIG_DIR)/.config.nopkg
@$(COMMON_CONFIG_ENV) \
KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
$< --allnoconfig $(CONFIG_CONFIG_IN)
@rm -f $(CONFIG_DIR)/.config.nopkg
silentoldconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
@mkdir -p $(BUILD_DIR)/buildroot-config
$(COMMON_CONFIG_ENV) $< --silentoldconfig $(CONFIG_CONFIG_IN)
olddefconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
@mkdir -p $(BUILD_DIR)/buildroot-config
$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN)
defconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
@mkdir -p $(BUILD_DIR)/buildroot-config
@$(COMMON_CONFIG_ENV) $< --defconfig$(if $(DEFCONFIG),=$(DEFCONFIG)) $(CONFIG_CONFIG_IN)
%_defconfig: $(BUILD_DIR)/buildroot-config/conf $(TOPDIR)/configs/%_defconfig outputmakefile
@mkdir -p $(BUILD_DIR)/buildroot-config
@$(COMMON_CONFIG_ENV) $< --defconfig=$(TOPDIR)/configs/$@ $(CONFIG_CONFIG_IN)
%_defconfig: $(BUILD_DIR)/buildroot-config/conf $(BR2_EXTERNAL)/configs/%_defconfig outputmakefile
@mkdir -p $(BUILD_DIR)/buildroot-config
@$(COMMON_CONFIG_ENV) $< --defconfig=$(BR2_EXTERNAL)/configs/$@ $(CONFIG_CONFIG_IN)
savedefconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
@mkdir -p $(BUILD_DIR)/buildroot-config
@$(COMMON_CONFIG_ENV) $< \
--savedefconfig=$(if $(DEFCONFIG),$(DEFCONFIG),$(CONFIG_DIR)/defconfig) \
$(CONFIG_CONFIG_IN)
# check if download URLs are outdated
source-check:
$(MAKE1) DL_MODE=SOURCE_CHECK $(EXTRAMAKEARGS) source
.PHONY: defconfig savedefconfig
################################################################################
#
# Cleanup and misc junk
#
################################################################################
# outputmakefile generates a Makefile in the output directory, if using a
# separate output directory. This allows convenient use of make in the
# output directory.
outputmakefile:
ifeq ($(NEED_WRAPPER),y)
$(Q)$(TOPDIR)/support/scripts/mkmakefile $(TOPDIR) $(O)
endif
# printvars prints all the variables currently defined in our Makefiles
printvars:
@$(foreach V, \
$(sort $(.VARIABLES)), \
$(if $(filter-out environment% default automatic, \
$(origin $V)), \
$(info $V=$($V) ($(value $V)))))
clean:
rm -rf $(TARGET_DIR) $(BINARIES_DIR) $(HOST_DIR) \
$(BUILD_DIR) $(BASE_DIR)/staging \
$(LEGAL_INFO_DIR)
distclean: clean
ifeq ($(DL_DIR),$(TOPDIR)/dl)
rm -rf $(DL_DIR)
endif
ifeq ($(O),output)
rm -rf $(O)
endif
rm -rf $(BR2_CONFIG) $(CONFIG_DIR)/.config.old $(CONFIG_DIR)/.auto.deps
help:
@echo 'Cleaning:'
@echo ' clean - delete all files created by build'
@echo ' distclean - delete all non-source files (including .config)'
@echo
@echo 'Build:'
@echo ' all - make world'
@echo ' toolchain - build toolchain'
@echo ' <package>-rebuild - force recompile <package>'
@echo ' <package>-reconfigure - force reconfigure <package>'
@echo ' <package>-graph-depends - generate graph of the dependency tree for package'
@echo
@echo 'Configuration:'
@echo ' menuconfig - interactive curses-based configurator'
@echo ' nconfig - interactive ncurses-based configurator'
@echo ' xconfig - interactive Qt-based configurator'
@echo ' gconfig - interactive GTK-based configurator'
@echo ' oldconfig - resolve any unresolved symbols in .config'
@echo ' silentoldconfig - Same as oldconfig, but quietly, additionally update deps'
@echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value'
@echo ' randconfig - New config with random answer to all options'
@echo ' defconfig - New config with default answer to all options'
@echo ' BR2_DEFCONFIG, if set, is used as input'
@echo ' savedefconfig - Save current config as ./defconfig (minimal config)'
@echo ' allyesconfig - New config where all options are accepted with yes'
@echo ' allnoconfig - New config where all options are answered with no'
@echo ' randpackageconfig - New config with random answer to package options'
@echo ' allyespackageconfig - New config where pkg options are accepted with yes'
@echo ' allnopackageconfig - New config where package options are answered with no'
ifeq ($(BR2_PACKAGE_BUSYBOX),y)
@echo ' busybox-menuconfig - Run BusyBox menuconfig'
endif
ifeq ($(BR2_LINUX_KERNEL),y)
@echo ' linux-menuconfig - Run Linux kernel menuconfig'
@echo ' linux-savedefconfig - Run Linux kernel savedefconfig'
endif
ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y)
@echo ' uclibc-menuconfig - Run uClibc menuconfig'
endif
ifeq ($(BR2_TARGET_BAREBOX),y)
@echo ' barebox-menuconfig - Run barebox menuconfig'
@echo ' barebox-savedefconfig - Run barebox savedefconfig'
endif
@echo
@echo 'Documentation:'
@echo ' manual - build manual in all formats'
@echo ' manual-html - build manual in HTML'
@echo ' manual-split-html - build manual in split HTML'
@echo ' manual-pdf - build manual in PDF'
@echo ' manual-text - build manual in text'
@echo ' manual-epub - build manual in ePub'
@echo ' graph-build - generate graphs of the build times'
@echo ' graph-depends - generate graph of the dependency tree'
@echo
@echo 'Miscellaneous:'
@echo ' source - download all sources needed for offline-build'
@echo ' source-check - check selected packages for valid download URLs'
@echo ' external-deps - list external packages used'
@echo ' legal-info - generate info about license compliance'
@echo
@echo ' make V=0|1 - 0 => quiet build (default), 1 => verbose build'
@echo ' make O=dir - Locate all output files in "dir", including .config'
@echo
@echo 'Built-in configs:'
@$(foreach b, $(sort $(notdir $(wildcard $(TOPDIR)/configs/*_defconfig))), \
printf " %-35s - Build for %s\\n" $(b) $(b:_defconfig=);)
ifneq ($(wildcard $(BR2_EXTERNAL)/configs/*_defconfig),)
@echo
@echo 'User-provided configs:'
@$(foreach b, $(sort $(notdir $(wildcard $(BR2_EXTERNAL)/configs/*_defconfig))), \
printf " %-35s - Build for %s\\n" $(b) $(b:_defconfig=);)
endif
@echo
@echo 'See docs/README, or generate the Buildroot manual for further details'
@echo
release: OUT = buildroot-$(BR2_VERSION)
# Create release tarballs. We need to fiddle a bit to add the generated
# documentation to the git output
release:
git archive --format=tar --prefix=$(OUT)/ HEAD > $(OUT).tar
$(MAKE) O=$(OUT) manual-html manual-text manual-pdf
tar rf $(OUT).tar $(OUT)
gzip -9 -c < $(OUT).tar > $(OUT).tar.gz
bzip2 -9 -c < $(OUT).tar > $(OUT).tar.bz2
rm -rf $(OUT) $(OUT).tar
print-version:
@echo $(BR2_VERSION_FULL)
include docs/manual/manual.mk
.PHONY: $(noconfig_targets)