d7bdee2d41
Add initial support for a13_olinuxino board with below features - U-Boot 2017.05 - Linux 4.11.5 - Default packages from buildroot Signed-off-by: Chakra Divi <chakra@openedev.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> [Thomas: - use full name in DEVELOPERS file - remove parametrization of the post-build.sh script, just hardcode the boot.cmd file used as input - add missing dosfstools and mtools host packages in defconfig, needed because a vfat partition is defined in the genimage.cfg file - minor tweaks to readme.txt file.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
44 lines
1.0 KiB
Plaintext
44 lines
1.0 KiB
Plaintext
A13-OLinuXino
|
|
|
|
Intro
|
|
=====
|
|
|
|
This default configuration will allow you to start experimenting with
|
|
the buildroot environment for the A13-OLinuXino. With the current
|
|
configuration it will bring-up the board, and allow access through the
|
|
serial console.
|
|
|
|
For more details about the A13-OLinuXino:
|
|
|
|
https://www.olimex.com/Products/OLinuXino/A13/A13-OLinuXino/open-source-hardware
|
|
|
|
How to build it
|
|
===============
|
|
|
|
Configure Buildroot:
|
|
|
|
$ make olimex_a13_olinuxino_defconfig
|
|
|
|
Compile everything and build the rootfs image:
|
|
|
|
$ make
|
|
|
|
Note: you will need access to the internet to download the required
|
|
sources.
|
|
|
|
How to write the SD card
|
|
========================
|
|
|
|
The sdcard.img file is a complete bootable image ready to be written
|
|
on the boot medium. To install it, simply copy the image to a micro SD
|
|
card:
|
|
|
|
# dd if=output/images/sdcard.img of=/dev/sdX
|
|
|
|
Notes:
|
|
- replace 'sdX' with the actual device with your micro SDcard,
|
|
- you may need to be root to do that (use 'sudo').
|
|
|
|
Eject the SD card, insert it in the A13-OLinuXino board, and power it
|
|
up.
|