f851660f9d
This is a Xilinx Zynq (xc7z045) development board, based on Xilinx Zynq (xc7z045). This support is based on Avnet Zedboard defconfig/readme. [Thomas: - minor fixes in the readme.txt - rename defconfig from zc706_defconfig to xilinx_zc706_defconfig.] Signed-off-by: Jordi Montagne <jordi.montagne66@gmail.com> Tested-by: Jean Burgat <jeanburgat33@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
57 lines
1.9 KiB
Plaintext
57 lines
1.9 KiB
Plaintext
This is the Buildroot board support for the Xilinx ZC706. The ZC706 is
|
|
a development board based on the Xilinx Zynq-7000 based
|
|
All-Programmable System-On-Chip.
|
|
|
|
ZC706 information including schematics, reference designs, and manuals
|
|
are available from
|
|
http://www.xilinx.com/products/boards-and-kits/ek-z7-zc706-g.html.
|
|
|
|
uboot.bin -- U-Boot SPL w/ Xilinx boot.bin wrapper
|
|
---------------------------------------------------
|
|
|
|
Due to licensing issues, the files ps7_init.c/h are not distributed
|
|
with the U-Boot source code. These files are required to make a
|
|
boot.bin file.
|
|
|
|
If you already have the Xilinx tools installed, the following sequence
|
|
will unpack, patch and build the rfs, kernel, uboot, and uboot-spl.
|
|
|
|
make xilinx_zc706_defconfig
|
|
make uboot-patch
|
|
cp ${XILINX_SDK_LIB}/hwplatform_templates/ZC706_hw_platform/ps7_init.{c,h} \
|
|
output/build/uboot-xilinx-v2014.1/board/xilinx/zynq/
|
|
|
|
Where ${XILINX_SDK_LIB} is ${XILINX}/SDK/${VERSION}/data/embeddedsw/lib.
|
|
|
|
After copying these files into the U-Boot source tree, you can
|
|
continue the build with:
|
|
|
|
make
|
|
|
|
*Notice*
|
|
While the build will successfully complete without the ps7_init.*
|
|
files, the uboot.bin file generated by this configuration will not
|
|
function properly on the ZC706. Therefore, it is imperative that the
|
|
ps7_init.* files be copied into the U-Boot source tree any time the
|
|
clean, or uboot-dirclean targets are executed.
|
|
|
|
Resulting system
|
|
----------------
|
|
|
|
A FAT32 partition should be created at the beggining of the SD Card
|
|
and the following files should be installed:
|
|
|
|
- boot.bin
|
|
- devicetree.dtb
|
|
- uImage
|
|
- uramdisk.image.gz
|
|
- u-boot.img
|
|
|
|
All needed files can be taken from <output>/images/
|
|
|
|
cp <output>/images/boot.bin /media/sdcard/
|
|
cp <output>/images/uImage /media/sdcard/
|
|
cp <output>/images/u-boot.img /media/sdcard/
|
|
cp <output>/images/zynq-zc706.dtb /media/sdcard/devicetree.dtb
|
|
cp <output>/images/rootfs.cpio.uboot /media/sdcard/uramdisk.image.gz
|