9e5a5451c7
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
64 lines
2.0 KiB
Plaintext
64 lines
2.0 KiB
Plaintext
|
|
******************** WARNING ********************
|
|
The compiled U-Boot binary is intended for NOR flash only!
|
|
It won't work for NAND or SPI and will brick those bootloaders!
|
|
|
|
Also don't go playing around with different U-boot versions or flash targets
|
|
unless you've got the necessary hardware and/or know-how to unbrick your kit.
|
|
|
|
2013.04 is known good for NOR.
|
|
******************** WARNING ********************
|
|
|
|
You'll need to program the files created by buildroot into the flash.
|
|
The fast way is to tftp transfer the files via one of the network interfaces.
|
|
|
|
Alternatively you can transfer the files via serial console with an Ymodem
|
|
file transfer from your terminal program by using a "loady" command
|
|
from the u-boot prompt instead of the "tftp ..." commands stated below.
|
|
Beware that serial console file transfers are quite slow!
|
|
|
|
Remember to set the P1010RDB switches to NOR boot if you want to use
|
|
your newly built U-Boot.
|
|
|
|
1. Program the new U-Boot binary to NOR flash (optional)
|
|
If you don't feel confident upgrading your bootloader then don't do it,
|
|
it's unnecessary most of the time.
|
|
|
|
=> tftp $loadaddr u-boot.bin
|
|
=> protect off 0xeff80000 +$filesize
|
|
=> erase 0xeff80000 +$filesize
|
|
=> cp.b $loadaddr 0xeff80000 $filesize
|
|
|
|
2. Program the DTB to NOR flash
|
|
|
|
=> tftp $loadaddr p1010rdb.dtb
|
|
=> erase 0xee000000 +$filesize
|
|
=> cp.b $loadaddr 0xee000000 $filesize
|
|
|
|
3. Program the kernel to NOR flash
|
|
|
|
=> tftp $loadaddr uImage
|
|
=> erase 0xee080000 +$filesize
|
|
=> cp.b $loadaddr 0xee080000 $filesize
|
|
|
|
4. Program the root filesystem to NOR flash
|
|
|
|
=> tftp $loadaddr rootfs.jffs2
|
|
=> erase 0xee800000 0xeff5ffff
|
|
=> cp.b $loadaddr 0xee800000 $filesize
|
|
|
|
5. Booting your new system
|
|
|
|
=> setenv norboot 'setenv bootargs root=/dev/mtdblock2 rootfstype=jffs2 console=$consoledev,$baudrate;bootm 0xee080000 - 0xee000000'
|
|
|
|
If you want to set this boot option as default:
|
|
|
|
=> setenv bootcmd 'run norboot'
|
|
=> saveenv
|
|
|
|
...or for a single boot:
|
|
|
|
=> run norboot
|
|
|
|
You can login with user "root".
|