kumquat-buildroot/board/freescale/warpboard/patches/linux/0002-replace-uart2-by-uart5.patch
Arthur LAMBERT 2c6e667caa board: add support for WarPboard
This is a set of patch to add support for warpboard
(Freescale board based on imx6sl)

The patch contains :
  - defconfig for warpboard
  - linux patches from Fabio Estevam to fix device tree due to last change on
  warpboard schematics (rev 1.12) and to fix kernel imx_v6_v7 defconfig which
  use incorrect hci protocol
  - specific firmware file for warpboard bluetooth
  nvram : brcmfmac4330-sdio.txt

Origin of nvram config file for wifi :
https://github.com/Freescale/meta-fsl-arm-extra

[Thomas: misc rewording/improvements in the README file.]

Signed-off-by: Arthur LAMBERT <arthur@dreem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-07-04 15:03:15 +02:00

104 lines
2.6 KiB
Diff

From: Fabio Estevam <fabio.estevam@freescale.com>
Date: Fri, 29 May 2015 16:19:39 -0300
Subject: [PATCH] ARM: dts: imx6sl-warp: Add changes for rev1.12
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
arch/arm/boot/dts/imx6sl-warp.dts | 32 +++++++++++++++++++-------------
1 file changed, 19 insertions(+), 13 deletions(-)
diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts
index 0da906b..bdfa82b 100644
--- a/arch/arm/boot/dts/imx6sl-warp.dts
+++ b/arch/arm/boot/dts/imx6sl-warp.dts
@@ -61,7 +61,9 @@
usdhc3_pwrseq: usdhc3_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, /* WL_REG_ON */
+ <&gpio4 7 GPIO_ACTIVE_LOW>, /* WL_HOSTWAKE */
<&gpio3 25 GPIO_ACTIVE_LOW>, /* BT_REG_ON */
+ <&gpio3 27 GPIO_ACTIVE_LOW>, /* BT_HOSTWAKE */
<&gpio4 4 GPIO_ACTIVE_LOW>, /* BT_WAKE */
<&gpio4 6 GPIO_ACTIVE_LOW>; /* BT_RST_N */
};
@@ -73,16 +75,16 @@
status = "okay";
};
-&uart2 {
+&uart3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- fsl,uart-has-rtscts;
+ pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
-&uart3 {
+&uart5 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
+ pinctrl-0 = <&pinctrl_uart5>;
+ fsl,uart-has-rtscts;
status = "okay";
};
@@ -130,14 +132,6 @@
>;
};
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX6SL_PAD_EPDC_D12__UART2_RX_DATA 0x41b0b1
- MX6SL_PAD_EPDC_D13__UART2_TX_DATA 0x41b0b1
- MX6SL_PAD_EPDC_D14__UART2_RTS_B 0x4130B1
- MX6SL_PAD_EPDC_D15__UART2_CTS_B 0x4130B1
- >;
- };
pinctrl_uart3: uart3grp {
fsl,pins = <
@@ -146,6 +140,15 @@
>;
};
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA 0x41b0b1
+ MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA 0x41b0b1
+ MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B 0x4130b1
+ MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B 0x4130b1
+ >;
+ };
+
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6SL_PAD_SD2_CMD__SD2_CMD 0x417059
@@ -158,6 +161,7 @@
MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x417059
MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x417059
MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x417059
+ MX6SL_PAD_SD2_RST__SD2_RESET 0x417059
>;
};
@@ -173,6 +177,7 @@
MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170b9
MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170b9
MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170b9
+ MX6SL_PAD_SD2_RST__SD2_RESET 0x4170b9
>;
};
@@ -188,6 +193,7 @@
MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170f9
MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170f9
MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170f9
+ MX6SL_PAD_SD2_RST__SD2_RESET 0x4170f9
>;
};
--
1.9.1