a3bba18f24
A defconfig for the friendlyarm nanopc-t4 was added inc23895f06e, but then removed in8efd4463f7because an ARM32 compiler was needed to build ATF, and this was not supported back then. Now, since package/arm-gnu-a-toolchain/ has been added, this defconfig can be re-introduced. Following new changes are introduced in comparision with the older changeset: - updated readme - GPT partition layout is being used - update defconfig to build ATF - bump u-boot to 2020.07 - bump linux to 5.8.2 Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> [Arnout: fixate U-Boot version; remove blind BR2_TARGET_UBOOT_NEEDS_PYTHON]
46 lines
867 B
Plaintext
46 lines
867 B
Plaintext
FriendlyARM NANOPC-T4
|
|
=====================
|
|
|
|
Build:
|
|
|
|
$ make nanopc_t4_defconfig
|
|
$ make
|
|
|
|
Files created in output directory
|
|
=================================
|
|
|
|
output/images
|
|
|
|
├── bl31.elf
|
|
├── boot.vfat
|
|
├── extlinux
|
|
├── idbloader.img
|
|
├── Image
|
|
├── rk3399-nanopc-t4.dtb
|
|
├── rootfs.ext2
|
|
├── rootfs.ext4 -> rootfs.ext2
|
|
├── rootfs.tar
|
|
├── sdcard.img
|
|
├── u-boot.bin
|
|
└── u-boot.itb
|
|
|
|
Creating bootable SD card:
|
|
==========================
|
|
|
|
Simply invoke (as root)
|
|
|
|
sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
|
|
|
|
Where X is your SD card device
|
|
|
|
Serial console
|
|
--------------
|
|
|
|
Baudrate for this board is 1500000
|
|
|
|
Login:
|
|
------
|
|
Apply power and press the PWR button for 3 sec. Enter 'root' as login user, and the prompt is ready.
|
|
|
|
https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/npc_t4.html
|