NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
e6f3e8c493
kumquat-buildroot/board/stmicroelectronics/stm32f429-disco
History
Arnout Vandecappelle 3dc8e8a97b stm32f429-disco: replace $HOST_DIR/usr with $HOST_DIR in flash script 
Manual change because the script uses ${OUTPUT_DIR}/host instead of
${HOST_DIR}.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-05 16:06:24 +02:00
..
patches/linux
flash.sh stm32f429-disco: replace $HOST_DIR/usr with $HOST_DIR in flash script 2017-07-05 16:06:24 +02:00
readme.txt board: add stm32f429-disc1 config 2017-05-01 20:54:39 +02:00

readme.txt 

STM32F429 Discovery
===================

This tutorial describes how to use the predefined Buildroot
configuration for the STM32F429 Discovery evaluation platform.

Supported HW
------------

 - STM32F429I-DISCO evaluation board
 - STM32F429I-DISC1 evaluation board

Building
--------

  make stm32f429_disco_defconfig
  make

Wire the UART
-------------

Use a USB to TTL adapter, and connect:

 - RX to PA9
 - TX to PA10
 - GND to one of the GND available on the board

The UART is configured at 115200.

Flashing
--------

  ./board/stmicroelectronics/stm32f429-disco/flash.sh output/ \
      {stm32f429discovery|stm32f429disc1}

It will flash the minimal bootloader, the Device Tree Blob, and the
kernel image which includes the root filesystem as initramfs.