NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
e6f3e8c493
kumquat-buildroot/board/friendlyarm/nanopi-r1
History
Davide Viti c08ec9191f configs/nanopi_r1: new defconfig 
Add initial support for Nanopi R1 board with below features:

  - U-Boot 2019.01
  - Linux 5.0
  - Default packages from buildroot

Configuration files taken from Armbian:

  https://github.com/armbian/build/blob/master/patch

Signed-off-by: Davide Viti <zinosat@gmail.com>
[Thomas: move U-Boot config and DT to board/friendlyarm/nanopi-r1/uboot/]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-04-13 22:29:30 +02:00
..
kernel configs/nanopi_r1: new defconfig 2020-04-13 22:29:30 +02:00
uboot configs/nanopi_r1: new defconfig 2020-04-13 22:29:30 +02:00
boot.cmd configs/nanopi_r1: new defconfig 2020-04-13 22:29:30 +02:00
genimage.cfg configs/nanopi_r1: new defconfig 2020-04-13 22:29:30 +02:00
readme.txt configs/nanopi_r1: new defconfig 2020-04-13 22:29:30 +02:00

readme.txt 

NanoPi R1

Intro
=====

This default configuration will allow you to start experimenting with the
buildroot environment for the NanoPi R1. With the current configuration
it will bring-up the board, and allow access through the serial console.

How to build it
===============

Configure Buildroot:

    $ make nanopi_r1_defconfig

Compile everything and build the SD card image:

    $ make

How to write the SD card
========================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX