35635cdc5b
This patch adds a new defconfig for the Star64 board made by Pine64. This board is based on the Starfive JH7110 RISC-V 64 bits SoC. See: https://wiki.pine64.org/wiki/STAR64. This patch uses a custom Kernel and U-Boot made for this board. The SPL has to be signed with the Starfive SPL-Tool which is a software provided by the vendor to get the necessary headers on the SPL. The image configuration is based on the work done by Ivan Velickovic <i.velickovic@unsw.edu.au>. Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> |
||
|---|---|---|
| .. | ||
| overlay/boot/extlinux | ||
| genimage.cfg | ||
| post-build.sh | ||
| readme.txt | ||
| star64-uboot-fit-image.its | ||
Pine64 Star64 ============= The Star64 is a low-cost RISC-V 64-bit based platform, powered by a Starfive JH7110 processor. https://wiki.pine64.org/wiki/STAR64 How to build ============ $ make pine64_star64_defconfig $ make How to write the SD card ======================== Once the build process is finished you will have an image called "sdcard.img" in the output/images/ directory. Copy the bootable "sdcard.img" onto an SD card with "dd": $ sudo dd if=output/images/sdcard.img of=/dev/sdX conv=fdatasync Preparing the board =================== Connect a TTL UART cable to pin 6 (GND), 8 (TX) and 10 (RX). Insert your SD card. Power-up the board using a 12V power supply.