NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
df5793e309
kumquat-buildroot/board/freescale/imx25pdk
History
Fabio Estevam d43f526a0e configs/freescale: drop unneeded exit statement in post-image scripts 
There is no need for the 'exit' statement in the post-image scripts,
so just remove it.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-08-01 21:36:22 +02:00
..
genimage.cfg
post-image.sh
readme.txt

readme.txt 

**************************
Freescale i.MX25 PDK board
**************************

This file documents the Buildroot support for the Freescale i.MX25 PDK board.

Build
=====

First, configure Buildroot for the i.MX25 PDK board:

  make mx25pdk_defconfig

Build all components:

  make

You will find in output/images/ the following files:
  - imx25-pdk.dtb
  - rootfs.ext4
  - rootfs.tar
  - sdcard.img
  - u-boot.imx
  - zImage

Create a bootable SD card
=========================

To determine the device associated to the SD card have a look in the
/proc/partitions file:

  cat /proc/partitions

Buildroot prepares a bootable "sdcard.img" image in the output/images/
directory, ready to be dumped on a SD card. Launch the following
command as root:

  dd if=output/images/sdcard.img of=/dev/<your-sd-device>

*** WARNING! This will destroy all the card content. Use with care! ***

For details about the medium image layout, see the definition in
board/freescale/imx25pdk/genimage.cfg.

Boot the i.MX25 PDK board
=========================

To boot your newly created system:
- insert the SD card in the SD slot of the board;
- put a USB cable into the Debug USB Port and connect using a terminal
  emulator at 115200 bps, 8n1;
- power on the board.

Enjoy!