dff08793ee
Signed-off-by: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
47 lines
1.0 KiB
Plaintext
47 lines
1.0 KiB
Plaintext
Pandaboard
|
|
==========
|
|
|
|
This file documents the Buildroot support for the Pandaboard, a
|
|
low-power, low-cost single-board computer development platform based
|
|
on the Texas Instruments OMAP4 system on a chip (SoC).
|
|
|
|
Configuring and building Buildroot
|
|
----------------------------------
|
|
|
|
Start from the defconfig:
|
|
|
|
$ make pandaboard_defconfig
|
|
|
|
You can edit build options the usual way:
|
|
|
|
$ make menuconfig
|
|
|
|
When you are happy with the setup, run:
|
|
|
|
$ make
|
|
|
|
The result of the build with the default settings should be these files:
|
|
|
|
output/images
|
|
+-- MLO
|
|
+-- omap4-panda-a4.dtb
|
|
+-- omap4-panda.dtb
|
|
+-- omap4-panda-es.dtb
|
|
+-- rootfs.ext4
|
|
+-- sdcard.img
|
|
+-- u-boot.img
|
|
+-- zImage
|
|
|
|
How to write the SD card
|
|
------------------------
|
|
|
|
Once the build process is finished you will have an image called "sdcard.img"
|
|
in the output/images/ directory.
|
|
|
|
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
|
|
|
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
|
|
|
Where /dev/sdX is the device node of your SD card (may be /dev/mmcblkX
|
|
instead depending on setup).
|