kumquat-buildroot/configs/atmel_sama5d2_xplained_mmc_dev_defconfig
Thomas Petazzoni dab1539613 configs/{at91, atmel}*_dev*: drop Dropbear as it duplicates OpenSSH
The "development" defconfigs for Atmel platforms enable both OpenSSH
and Dropbear, which doesn't make a lot of sense, as only one SSH
server can start on port 22.

This commit therefore drops BR2_PACKAGE_DROPBEAR=y from those
defconfigs, keeping OpenSSH as an SSH server/client, as was requested
by Atmel/Microchip folks in the review of an earlier version of this
patch [1]. Since those defconfigs are "development" defconfigs, they
are not meant to be minimal, and already provide an arbitrary set of
packages, so using openssh is just as good as using dropbear in this
case.

[1] https://patchwork.ozlabs.org/patch/989516/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-10-30 22:49:00 +01:00

106 lines
2.9 KiB
Plaintext

# Architecture
BR2_arm=y
BR2_cortex_a5=y
BR2_ARM_ENABLE_NEON=y
BR2_ARM_ENABLE_VFP=y
BR2_ARM_INSTRUCTIONS_THUMB2=y
# Toolchain
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Needed for some packages
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
# Needed for gdb
BR2_PTHREAD_DEBUG=y
# Needed for some packages
BR2_TOOLCHAIN_BUILDROOT_CXX=y
# System Configuration
# Needed for usb-utils
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
# Creation of the SD card image
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/atmel/sama5d2_xplained_mmc/genimage.cfg"
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,linux-at91,linux4sam_5.8)/linux-linux4sam_5.8.tar.gz"
BR2_LINUX_KERNEL_DEFCONFIG="sama5"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-sama5d2_xplained at91-sama5d2_xplained_pda4 at91-sama5d2_xplained_pda7 at91-sama5d2_xplained_pda7b"
# Packages
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
BR2_PACKAGE_ALSA_UTILS=y
BR2_PACKAGE_ALSA_UTILS_ALSACONF=y
BR2_PACKAGE_ALSA_UTILS_APLAY=y
BR2_PACKAGE_FFMPEG=y
BR2_PACKAGE_FFMPEG_GPL=y
BR2_PACKAGE_FFMPEG_SWSCALE=y
BR2_PACKAGE_MPG123=y
BR2_PACKAGE_BZIP2=y
BR2_PACKAGE_GZIP=y
BR2_PACKAGE_UNZIP=y
BR2_PACKAGE_XZ=y
BR2_PACKAGE_ZIP=y
BR2_PACKAGE_GDB=y
BR2_PACKAGE_LMBENCH=y
BR2_PACKAGE_DOSFSTOOLS=y
BR2_PACKAGE_DOSFSTOOLS_FATLABEL=y
BR2_PACKAGE_DOSFSTOOLS_FSCK_FAT=y
BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y
BR2_PACKAGE_MMC_UTILS=y
BR2_PACKAGE_MTD=y
BR2_PACKAGE_WILC1000_FIRMWARE=y
BR2_PACKAGE_DEVMEM2=y
BR2_PACKAGE_EVTEST=y
BR2_PACKAGE_I2C_TOOLS=y
BR2_PACKAGE_SETSERIAL=y
BR2_PACKAGE_SPI_TOOLS=y
BR2_PACKAGE_USBUTILS=y
BR2_PACKAGE_LIBDRM=y
BR2_PACKAGE_LIBDRM_INSTALL_TESTS=y
BR2_PACKAGE_DTC=y
BR2_PACKAGE_DTC_PROGRAMS=y
BR2_PACKAGE_BLUEZ_UTILS=y
BR2_PACKAGE_BRIDGE_UTILS=y
BR2_PACKAGE_CAN_UTILS=y
BR2_PACKAGE_ETHTOOL=y
BR2_PACKAGE_IPERF=y
BR2_PACKAGE_IPROUTE2=y
BR2_PACKAGE_IPTABLES=y
BR2_PACKAGE_IW=y
BR2_PACKAGE_LRZSZ=y
BR2_PACKAGE_MII_DIAG=y
BR2_PACKAGE_OPENSSH=y
BR2_PACKAGE_WGET=y
BR2_PACKAGE_WIRELESS_TOOLS=y
BR2_PACKAGE_WPA_SUPPLICANT=y
BR2_PACKAGE_BASH=y
BR2_PACKAGE_HTOP=y
BR2_PACKAGE_VIM=y
# Filesystem
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
# Bootloaders
BR2_TARGET_AT91BOOTSTRAP3=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.10"
BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d2_xplainedsd_uboot"
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_GIT=y
BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_5.8"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d2_xplained_mmc"
BR2_TARGET_UBOOT_NEEDS_DTC=y
# Host packages
# Needed to generate the SD card image
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y