6f3261bca9
This patch adds support for ZynqMP ZCU104 evaluation board. ZCU104 features can be found here: https://www.xilinx.com/products/boards-and-kits/zcu104.html Signed-off-by: Neal Frager <neal.frager@amd.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
67 lines
1.6 KiB
Plaintext
67 lines
1.6 KiB
Plaintext
***************************************************
|
|
Xilinx ZCU102 / ZCU104 / ZCU106 boards - ZynqMP SoC
|
|
***************************************************
|
|
|
|
This document describes the Buildroot support for the ZCU102, ZCU104
|
|
and ZCU106 boards by Xilinx, based on the Zynq UltraScale+ MPSoC (aka
|
|
ZynqMP). It has been tested with the ZCU102 and ZCU106 production
|
|
boards.
|
|
|
|
Evaluation board features can be found here with the links below.
|
|
|
|
ZCU102:
|
|
https://www.xilinx.com/products/boards-and-kits/zcu102.html
|
|
|
|
ZCU104:
|
|
https://www.xilinx.com/products/boards-and-kits/zcu104.html
|
|
|
|
ZCU106:
|
|
https://www.xilinx.com/products/boards-and-kits/zcu106.html
|
|
|
|
|
|
How to build it
|
|
===============
|
|
|
|
Configure Buildroot: (use the command for the specific board)
|
|
|
|
$ make zynqmp_zcu102_defconfig
|
|
$ make zynqmp_zcu104_defconfig
|
|
$ make zynqmp_zcu106_defconfig
|
|
|
|
Compile everything and build the rootfs image:
|
|
|
|
$ make
|
|
|
|
Result of the build
|
|
-------------------
|
|
|
|
After building, you should get a tree like this:
|
|
|
|
output/images/
|
|
+-- atf-uboot.ub
|
|
+-- bl31.bin
|
|
+-- boot.bin
|
|
+-- boot.vfat
|
|
+-- Image
|
|
+-- rootfs.ext2
|
|
+-- rootfs.ext4 -> rootfs.ext2
|
|
+-- sdcard.img
|
|
+-- system.dtb -> zynqmp-zcu106-revA.dtb
|
|
+-- u-boot.itb
|
|
`-- zynqmp-zcu106-revA.dtb
|
|
|
|
How to write the SD card
|
|
========================
|
|
|
|
WARNING! This will destroy all the card content. Use with care!
|
|
|
|
The sdcard.img file is a complete bootable image ready to be written
|
|
on the boot medium. To install it, simply copy the image to an SD
|
|
card:
|
|
|
|
# dd if=output/images/sdcard.img of=/dev/sdX
|
|
|
|
Where 'sdX' is the device node of the SD.
|
|
|
|
Eject the SD card, insert it in the board, and power it up.
|