kumquat-buildroot/configs/beaglebone_defconfig
Anders Darander 0399249b76 beaglebone: add am33x-cm3 to the build
Add the FW needed for the Cortex M3 on the beaglebone. This is required
for working power management.

Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-05-14 22:50:17 +02:00

40 lines
1.2 KiB
Plaintext

# architecture
BR2_arm=y
BR2_cortex_a8=y
BR2_EXTRA_GCC_CONFIG_OPTIONS="--with-fpu=vfpv3 --with-float=hard"
# BR2_SOFT_FLOAT is not set
# system
BR2_TARGET_GENERIC_HOSTNAME="beaglebone"
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y
BR2_TARGET_GENERIC_GETTY_PORT="ttyO0"
# BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW is not set
# filesystem
BR2_PACKAGE_AM33X_CM3=y
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
# lock down headers to avoid breaking with new defaults
BR2_KERNEL_HEADERS_VERSION=y
BR2_DEFAULT_KERNEL_VERSION="3.8.12"
# bootloader
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BOARDNAME="am335x_evm"
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2013.04"
BR2_TARGET_UBOOT_FORMAT_IMG=y
BR2_TARGET_UBOOT_SPL=y
BR2_TARGET_UBOOT_SPL_NAME="MLO"
# kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.ti.com/ti-linux-kernel/ti-linux-kernel.git"
BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="935f6c2f82056d538b528272e2bdbb5c08d69a58"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/beaglebone/linux-3.8.config"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="am335x-bone"