e6e60becb0
Linaro has just released a new pre-built toolchain, available as a tarball, which is a pure toolchain (only the C library is included). This makes this new Linaro 2012.01 toolchain usable in Buildroot, so let's integrate the support for it. In addition to simply adding the new external toolchain at the usual locations, this patch allows need to adapt a few things to support Linaro toolchains. Most toolchains store their libraries in the "lib/" or "usr/lib" directories relative to the toolchain. Buildroot toolchains on the other hand, store the libraries in the "usr/<target-name>/lib" directory. And the Linaro toolchain has choosen to use the "lib/<target-name>" directory. Therefore, this patch adjust: * The logic to search a particular library when that library needs to be copied to the target directory * The logic to deduce the sysroot directory from the libc.a file location in the toolchain: removing "(usr/?)lib(64?)" is no longer sufficient, we need to take into account the "lib/<target-name>/" case. Since the Linaro toolchain generates code for Cortex-A processors only, the selection of this toolchain is limited to Cortex-A8 and Cortex-A9. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
280 lines
10 KiB
Makefile
280 lines
10 KiB
Makefile
# This Makefile fragment declares helper functions, usefull to handle
|
|
# non- buildroot-built toolchains, eg. purely external toolchains or
|
|
# toolchains (internally) built using crosstool-NG.
|
|
|
|
#
|
|
# Copy a toolchain library and its symbolic links from the sysroot
|
|
# directory to the target directory. Also optionaly strips the
|
|
# library.
|
|
#
|
|
# Most toolchains (CodeSourcery ones) have their libraries either in
|
|
# /lib or /usr/lib relative to their ARCH_SYSROOT_DIR, so we search
|
|
# libraries in:
|
|
#
|
|
# $${ARCH_LIB_DIR}
|
|
# usr/$${ARCH_LIB_DIR}
|
|
#
|
|
# Buildroot toolchains, however, have basic libraries in /lib, and
|
|
# libstdc++/libgcc_s in /usr/<target-name>/lib(64), so we also need to
|
|
# search libraries in:
|
|
#
|
|
# usr/$(TOOLCHAIN_EXTERNAL_PREFIX)/$${ARCH_LIB_DIR}
|
|
#
|
|
# Finally, Linaro toolchains have the libraries in lib/<target-name>/,
|
|
# so we need to search libraries in:
|
|
#
|
|
# $${ARCH_LIB_DIR}/$(TOOLCHAIN_EXTERNAL_PREFIX)
|
|
#
|
|
# Thanks to ARCH_LIB_DIR we also take into account toolchains that
|
|
# have the libraries in lib64 and usr/lib64.
|
|
#
|
|
# Please be very careful to check the major toolchain sources:
|
|
# Buildroot, Crosstool-NG, CodeSourcery and Linaro before doing any
|
|
# modification on the below logic.
|
|
#
|
|
# $1: arch specific sysroot directory
|
|
# $2: library directory ('lib' or 'lib64') from which libraries must be copied
|
|
# $3: library name
|
|
# $4: destination directory of the libary, relative to $(TARGET_DIR)
|
|
#
|
|
copy_toolchain_lib_root = \
|
|
ARCH_SYSROOT_DIR="$(strip $1)"; \
|
|
ARCH_LIB_DIR="$(strip $2)" ; \
|
|
LIB="$(strip $3)"; \
|
|
DESTDIR="$(strip $4)" ; \
|
|
\
|
|
LIBS=`(cd $${ARCH_SYSROOT_DIR}; \
|
|
find -L $${ARCH_LIB_DIR} usr/$${ARCH_LIB_DIR} usr/$(TOOLCHAIN_EXTERNAL_PREFIX)/$${ARCH_LIB_DIR} $${ARCH_LIB_DIR}/$(TOOLCHAIN_EXTERNAL_PREFIX) \
|
|
-maxdepth 1 -name "$${LIB}.*" 2>/dev/null \
|
|
)` ; \
|
|
for FILE in $${LIBS} ; do \
|
|
LIB=`basename $${FILE}`; \
|
|
LIBDIR=`dirname $${FILE}` ; \
|
|
while test \! -z "$${LIB}"; do \
|
|
FULLPATH="$${ARCH_SYSROOT_DIR}/$${LIBDIR}/$${LIB}" ; \
|
|
rm -fr $(TARGET_DIR)/$${DESTDIR}/$${LIB}; \
|
|
mkdir -p $(TARGET_DIR)/$${DESTDIR}; \
|
|
if test -h $${FULLPATH} ; then \
|
|
cp -d $${FULLPATH} $(TARGET_DIR)/$${DESTDIR}/; \
|
|
elif test -f $${FULLPATH}; then \
|
|
$(INSTALL) -D -m0755 $${FULLPATH} $(TARGET_DIR)/$${DESTDIR}/$${LIB}; \
|
|
else \
|
|
exit -1; \
|
|
fi; \
|
|
LIB="`readlink $${FULLPATH}`"; \
|
|
done; \
|
|
done; \
|
|
\
|
|
echo -n
|
|
|
|
#
|
|
# Copy the full external toolchain sysroot directory to the staging
|
|
# dir. The operation of this function is rendered a little bit
|
|
# complicated by the support for multilib toolchains.
|
|
#
|
|
# We start by copying etc, lib, sbin and usr from the sysroot of the
|
|
# selected architecture variant (as pointed by ARCH_SYSROOT_DIR). This
|
|
# allows to import into the staging directory the C library and
|
|
# companion libraries for the correct architecture variant. We
|
|
# explictly only copy etc, lib, sbin and usr since other directories
|
|
# might exist for other architecture variants (on Codesourcery
|
|
# toolchain, the sysroot for the default architecture variant contains
|
|
# the armv4t and thumb2 subdirectories, which are the sysroot for the
|
|
# corresponding architecture variants), and we don't want to import
|
|
# them.
|
|
#
|
|
# Then, if the selected architecture variant is not the default one
|
|
# (i.e, if SYSROOT_DIR != ARCH_SYSROOT_DIR), then we :
|
|
#
|
|
# * Import the header files from the default architecture
|
|
# variant. Header files are typically shared between the sysroots
|
|
# for the different architecture variants. If we use the
|
|
# non-default one, header files were not copied by the previous
|
|
# step, so we copy them here from the sysroot of the default
|
|
# architecture variant.
|
|
#
|
|
# * Create a symbolic link that matches the name of the subdirectory
|
|
# for the architecture variant in the original sysroot. This is
|
|
# required as the compiler will by default look in
|
|
# sysroot_dir/arch_variant/ for libraries and headers, when the
|
|
# non-default architecture variant is used. Without this, the
|
|
# compiler fails to find libraries and headers.
|
|
#
|
|
# Note that the 'locale' directories are not copied. They are huge
|
|
# (400+MB) in CodeSourcery toolchains, and they are not really useful.
|
|
#
|
|
# $1: main sysroot directory of the toolchain
|
|
# $2: arch specific sysroot directory of the toolchain
|
|
# $3: arch specific subdirectory in the sysroot
|
|
# $4: directory of libraries ('lib' or 'lib64')
|
|
#
|
|
copy_toolchain_sysroot = \
|
|
SYSROOT_DIR="$(strip $1)"; \
|
|
ARCH_SYSROOT_DIR="$(strip $2)"; \
|
|
ARCH_SUBDIR="$(strip $3)"; \
|
|
ARCH_LIB_DIR="$(strip $4)" ; \
|
|
for i in etc $${ARCH_LIB_DIR} sbin usr ; do \
|
|
if [ -d $${ARCH_SYSROOT_DIR}/$$i ] ; then \
|
|
rsync -au --chmod=Du+w --exclude 'usr/lib/locale' $${ARCH_SYSROOT_DIR}/$$i $(STAGING_DIR)/ ; \
|
|
fi ; \
|
|
done ; \
|
|
if [ `readlink -f $${SYSROOT_DIR}` != `readlink -f $${ARCH_SYSROOT_DIR}` ] ; then \
|
|
if [ ! -d $${ARCH_SYSROOT_DIR}/usr/include ] ; then \
|
|
cp -a $${SYSROOT_DIR}/usr/include $(STAGING_DIR)/usr ; \
|
|
fi ; \
|
|
mkdir -p `dirname $(STAGING_DIR)/$${ARCH_SUBDIR}` ; \
|
|
relpath="./" ; \
|
|
nbslashs=`echo -n $${ARCH_SUBDIR} | sed 's%[^/]%%g' | wc -c` ; \
|
|
for slash in `seq 1 $${nbslashs}` ; do \
|
|
relpath=$${relpath}"../" ; \
|
|
done ; \
|
|
ln -s $${relpath} $(STAGING_DIR)/$${ARCH_SUBDIR} ; \
|
|
echo "Symlinking $(STAGING_DIR)/$${ARCH_SUBDIR} -> $${relpath}" ; \
|
|
fi ; \
|
|
find $(STAGING_DIR) -type d | xargs chmod 755
|
|
|
|
#
|
|
# Create lib64 -> lib and usr/lib64 -> usr/lib symbolic links in the
|
|
# target and staging directories. This is needed for some 64 bits
|
|
# toolchains such as the Crosstool-NG toolchains, for which the path
|
|
# to the dynamic loader and other libraries is /lib64, but the
|
|
# libraries are stored in /lib.
|
|
#
|
|
create_lib64_symlinks = \
|
|
(cd $(TARGET_DIR) ; ln -s lib lib64) ; \
|
|
(cd $(TARGET_DIR)/usr ; ln -s lib lib64) ; \
|
|
(cd $(STAGING_DIR) ; ln -s lib lib64) ; \
|
|
(cd $(STAGING_DIR)/usr ; ln -s lib lib64)
|
|
|
|
#
|
|
# Check the availability of a particular glibc feature. We assume that
|
|
# all Buildroot toolchain options are supported by glibc, so we just
|
|
# check that they are enabled.
|
|
#
|
|
# $1: Buildroot option name
|
|
# $2: feature description
|
|
#
|
|
check_glibc_feature = \
|
|
if [ x$($(1)) != x"y" ] ; then \
|
|
echo "$(2) available in C library, please enable $(1)" ; \
|
|
exit 1 ; \
|
|
fi
|
|
|
|
#
|
|
# Check the correctness of a glibc external toolchain configuration.
|
|
# 1. Check that the C library selected in Buildroot matches the one
|
|
# of the external toolchain
|
|
# 2. Check that all the C library-related features are enabled in the
|
|
# config, since glibc always supports all of them
|
|
#
|
|
# $1: sysroot directory
|
|
#
|
|
check_glibc = \
|
|
SYSROOT_DIR="$(strip $1)"; \
|
|
if ! test -f $${SYSROOT_DIR}/lib/ld-linux*.so.* -o -f $${SYSROOT_DIR}/lib/ld.so.* ; then \
|
|
echo "Incorrect selection of the C library"; \
|
|
exit -1; \
|
|
fi; \
|
|
$(call check_glibc_feature,BR2_LARGEFILE,Large file support) ;\
|
|
$(call check_glibc_feature,BR2_INET_IPV6,IPv6 support) ;\
|
|
$(call check_glibc_feature,BR2_INET_RPC,RPC support) ;\
|
|
$(call check_glibc_feature,BR2_ENABLE_LOCALE,Locale support) ;\
|
|
$(call check_glibc_feature,BR2_USE_MMU,MMU support) ;\
|
|
$(call check_glibc_feature,BR2_USE_WCHAR,Wide char support)
|
|
|
|
#
|
|
# Check the conformity of Buildroot configuration with regard to the
|
|
# uClibc configuration of the external toolchain, for a particular
|
|
# feature.
|
|
#
|
|
# $1: uClibc macro name
|
|
# $2: Buildroot option name
|
|
# $3: uClibc config file
|
|
# $4: feature description
|
|
#
|
|
check_uclibc_feature = \
|
|
IS_IN_LIBC=`grep -q "\#define $(1) 1" $(3) && echo y` ; \
|
|
if [ x$($(2)) != x"y" -a x$${IS_IN_LIBC} = x"y" ] ; then \
|
|
echo "$(4) available in C library, please enable $(2)" ; \
|
|
exit 1 ; \
|
|
fi ; \
|
|
if [ x$($(2)) = x"y" -a x$${IS_IN_LIBC} != x"y" ] ; then \
|
|
echo "$(4) not available in C library, please disable $(2)" ; \
|
|
exit 1 ; \
|
|
fi
|
|
|
|
#
|
|
# Check the correctness of a uclibc external toolchain configuration
|
|
# 1. Check that the C library selected in Buildroot matches the one
|
|
# of the external toolchain
|
|
# 2. Check that the features enabled in the Buildroot configuration
|
|
# match the features available in the uClibc of the external
|
|
# toolchain
|
|
#
|
|
# $1: sysroot directory
|
|
#
|
|
check_uclibc = \
|
|
SYSROOT_DIR="$(strip $1)"; \
|
|
if ! test -f $${SYSROOT_DIR}/usr/include/bits/uClibc_config.h ; then \
|
|
echo "Incorrect selection of the C library"; \
|
|
exit -1; \
|
|
fi; \
|
|
UCLIBC_CONFIG_FILE=$${SYSROOT_DIR}/usr/include/bits/uClibc_config.h ; \
|
|
$(call check_uclibc_feature,__ARCH_USE_MMU__,BR2_USE_MMU,$${UCLIBC_CONFIG_FILE},MMU support) ;\
|
|
$(call check_uclibc_feature,__UCLIBC_HAS_LFS__,BR2_LARGEFILE,$${UCLIBC_CONFIG_FILE},Large file support) ;\
|
|
$(call check_uclibc_feature,__UCLIBC_HAS_IPV6__,BR2_INET_IPV6,$${UCLIBC_CONFIG_FILE},IPv6 support) ;\
|
|
$(call check_uclibc_feature,__UCLIBC_HAS_RPC__,BR2_INET_RPC,$${UCLIBC_CONFIG_FILE},RPC support) ;\
|
|
$(call check_uclibc_feature,__UCLIBC_HAS_LOCALE__,BR2_ENABLE_LOCALE,$${UCLIBC_CONFIG_FILE},Locale support) ;\
|
|
$(call check_uclibc_feature,__UCLIBC_HAS_WCHAR__,BR2_USE_WCHAR,$${UCLIBC_CONFIG_FILE},Wide char support) ;\
|
|
$(call check_uclibc_feature,__UCLIBC_HAS_THREADS__,BR2_TOOLCHAIN_HAS_THREADS,$${UCLIBC_CONFIG_FILE},Thread support) ;\
|
|
$(call check_uclibc_feature,__PTHREADS_DEBUG_SUPPORT__,BR2_TOOLCHAIN_HAS_THREADS_DEBUG,$${UCLIBC_CONFIG_FILE},Thread debugging support)
|
|
|
|
#
|
|
# Check that the Buildroot configuration of the ABI matches the
|
|
# configuration of the external toolchain.
|
|
#
|
|
# $1: cross-gcc path
|
|
#
|
|
check_arm_abi = \
|
|
__CROSS_CC=$(strip $1) ; \
|
|
EXT_TOOLCHAIN_TARGET=`LANG=C $${__CROSS_CC} -v 2>&1 | grep ^Target | cut -f2 -d ' '` ; \
|
|
if echo $${EXT_TOOLCHAIN_TARGET} | grep -q 'eabi$$' ; then \
|
|
EXT_TOOLCHAIN_ABI="eabi" ; \
|
|
else \
|
|
EXT_TOOLCHAIN_ABI="oabi" ; \
|
|
fi ; \
|
|
if [ x$(BR2_ARM_OABI) = x"y" -a $${EXT_TOOLCHAIN_ABI} = "eabi" ] ; then \
|
|
echo "Incorrect ABI setting" ; \
|
|
exit 1 ; \
|
|
fi ; \
|
|
if [ x$(BR2_ARM_EABI) = x"y" -a $${EXT_TOOLCHAIN_ABI} = "oabi" ] ; then \
|
|
echo "Incorrect ABI setting" ; \
|
|
exit 1 ; \
|
|
fi
|
|
|
|
#
|
|
# Check that the external toolchain supports C++
|
|
#
|
|
# $1: cross-g++ path
|
|
#
|
|
check_cplusplus = \
|
|
__CROSS_CXX=$(strip $1) ; \
|
|
$${__CROSS_CXX} -v > /dev/null 2>&1 ; \
|
|
if test $$? -ne 0 ; then \
|
|
echo "C++ support is selected but is not available in external toolchain" ; \
|
|
exit 1 ; \
|
|
fi
|
|
|
|
#
|
|
# Check that the cross-compiler given in the configuration exists
|
|
#
|
|
# $1: cross-gcc path
|
|
#
|
|
check_cross_compiler_exists = \
|
|
__CROSS_CC=$(strip $1) ; \
|
|
$${__CROSS_CC} -v > /dev/null 2>&1 ; \
|
|
if test $$? -ne 0 ; then \
|
|
echo "Cannot execute cross-compiler '$${__CROSS_CC}'" ; \
|
|
exit 1 ; \
|
|
fi
|