RADXA ROCKPI-N8
================
https://wiki.radxa.com/RockpiN8
Build:
======
$ make rock_pi_n8_defconfig
$ make
Files created in output directory
=================================
output/images
.
├── boot.vfat
├── extlinux
├── idbloader.img
├── rk3288-rock-pi-n8.dtb
├── rootfs.ext2
├── rootfs.ext4 -> rootfs.ext2
├── rootfs.tar
├── sdcard.img
├── u-boot.bin
├── u-boot-dtb.bin
├── u-boot-dtb.img
└── zImage
Creating bootable SD card:
==========================
Simply invoke (as root)
sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
Where X is your SD card device.
Booting:
========
Serial console:
---------------
RockPi-N8 has a 40-pin GPIO header. The pin layout is as follows:
pin 6: gnd
pin 8: tx
pin 10: rx
Baudrate for this board is 115200.
The boot order on rockpi-n8 is emmc, sd. If emmc contains a valid Image, the board
always boots from emmc. To boot from SD, erase emmc as per the guide:
https://wiki.amarulasolutions.com/bsp/setup/rockchip/rk3399_emmc.html
Login:
------
Enter 'root' as login user, and the prompt is ready.
wiki link:
----------
https://wiki.amarulasolutions.com/bsp/rockchip/rk3288/rock-pi-n8.html
a87ae21630