NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
d30258309f
kumquat-buildroot/make/gcc-3.3.mk
Manuel Novoa III d632d42b34 Enable building soft float buildroot for gcc 3.3. Currently works for 
i386 (limited to 64 bit long double... same as double), arm (libfloat),
  mips, and mipsel.
Enable cross compiling a native gcc 3.3 toolchain to run on the target.
Misc rootfs cleanups... strip some things that weren't, eliminate duplicate
  libs, move openssl shared libs out of /lib, reduce size of libssl.so
  by dynamicly linking with libcrypto.so, fix dropbear compile on mips.
2003-11-01 05:34:41 +00:00

463 lines
19 KiB
Makefile
Raw Blame History

# Makefile for to build a gcc/uClibc toolchain
#
# Copyright (C) 2002-2003 Erik Andersen <andersen@uclibc.org>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
ifneq ($(GCC_2_95_TOOLCHAIN),true)
# Older stuff...
#GCC_SITE:=ftp://ftp.gnu.org/gnu/gcc/
#GCC_SOURCE:=gcc-3.3.tar.gz
#GCC_DIR:=$(TOOL_BUILD_DIR)/gcc-3.3
#GCC_CAT:=zcat
# Shiny new stuff...
GCC_VERSION:=3.3.2
#GCC_SITE:=ftp://ftp.gnu.org/gnu/gcc/gcc-$(GCC_VERSION)
#GCC_SITE:=http://www.binarycode.org/gcc/releases/gcc-$(GCC_VERSION)
GCC_SITE:=http://gcc.get-software.com/releases/gcc-$(GCC_VERSION)
#
# snapshots....
#GCC_VERSION:=3.3-20031013
#GCC_SITE:=http://gcc.get-software.com/snapshots/$(GCC_VERSION)
#
GCC_SOURCE:=gcc-$(GCC_VERSION).tar.bz2
GCC_DIR:=$(TOOL_BUILD_DIR)/gcc-$(GCC_VERSION)
GCC_CAT:=bzcat
#############################################################
#
# Setup some initial stuff
#
#############################################################
ifeq ($(INSTALL_LIBSTDCPP),true)
TARGET_LANGUAGES:=c,c++
else
TARGET_LANGUAGES:=c
endif
#############################################################
#
# build the first pass gcc compiler
#
#############################################################
GCC_BUILD_DIR1:=$(TOOL_BUILD_DIR)/gcc-3.3-initial
$(DL_DIR)/$(GCC_SOURCE):
$(WGET) -P $(DL_DIR) $(GCC_SITE)/$(GCC_SOURCE)
$(GCC_DIR)/.unpacked: $(DL_DIR)/$(GCC_SOURCE)
$(GCC_CAT) $(DL_DIR)/$(GCC_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
touch $(GCC_DIR)/.unpacked
$(GCC_DIR)/.patched: $(GCC_DIR)/.unpacked
# Apply any files named gcc-*.patch from the source directory to gcc
$(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR) gcc-*.patch
ifneq ("$(strip $(TARGET_SOFT_FLOAT))","")
ifeq ("$(strip $(ARCH))","i386")
$(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR) i386-gcc-soft-float.patch
endif
endif
touch $(GCC_DIR)/.patched
$(GCC_DIR)/.gcc3_3_build_hacks: $(GCC_DIR)/.patched
#
# Hack things to use the correct shared lib loader
#
(cd $(GCC_DIR); set -e; export LIST=`grep -lr -- "-dynamic-linker.*\.so[\.0-9]*" *`;\
if [ -n "$$LIST" ] ; then \
perl -i -p -e "s,-dynamic-linker.*\.so[\.0-9]*},\
-dynamic-linker /lib/ld-uClibc.so.0},;" $$LIST; fi);
#
# Prevent system glibc start files from leaking in uninvited...
#
perl -i -p -e "s,standard_startfile_prefix_1 = \".*,standard_startfile_prefix_1 =\
\"$(STAGING_DIR)/lib/\";,;" $(GCC_DIR)/gcc/gcc.c;
perl -i -p -e "s,standard_startfile_prefix_2 = \".*,standard_startfile_prefix_2 =\
\"$(STAGING_DIR)/usr/lib/\";,;" $(GCC_DIR)/gcc/gcc.c;
#
# Prevent system glibc include files from leaking in uninvited...
#
perl -i -p -e "s,^NATIVE_SYSTEM_HEADER_DIR.*,NATIVE_SYSTEM_HEADER_DIR=\
$(STAGING_DIR)/include,;" $(GCC_DIR)/gcc/Makefile.in;
perl -i -p -e "s,^CROSS_SYSTEM_HEADER_DIR.*,CROSS_SYSTEM_HEADER_DIR=\
$(STAGING_DIR)/include,;" $(GCC_DIR)/gcc/Makefile.in;
perl -i -p -e "s,^#define.*STANDARD_INCLUDE_DIR.*,#define STANDARD_INCLUDE_DIR \
\"$(STAGING_DIR)/include\",;" $(GCC_DIR)/gcc/cppdefault.h;
#
# Prevent system glibc libraries from being found by collect2
# when it calls locatelib() and rummages about the system looking
# for libraries with the correct name...
#
perl -i -p -e "s,\"/lib,\"$(STAGING_DIR)/lib,g;" $(GCC_DIR)/gcc/collect2.c
perl -i -p -e "s,\"/usr/,\"$(STAGING_DIR)/usr/,g;" $(GCC_DIR)/gcc/collect2.c
#
# Prevent gcc from using the unwind-dw2-fde-glibc code
#
perl -i -p -e "s,^#ifndef inhibit_libc,#define inhibit_libc\n\
#ifndef inhibit_libc,g;" $(GCC_DIR)/gcc/unwind-dw2-fde-glibc.c;
touch $(GCC_DIR)/.gcc3_3_build_hacks
# The --without-headers option stopped working with gcc 3.0 and has never been
# # fixed, so we need to actually have working C library header files prior to
# # the step or libgcc will not build...
$(GCC_BUILD_DIR1)/.configured: $(GCC_DIR)/.gcc3_3_build_hacks
mkdir -p $(GCC_BUILD_DIR1)
echo -e "#!/bin/sh\nexec $(GCC_BUILD_DIR1)/gcc/xgcc -B$(GCC_BUILD_DIR1)/gcc/ -B$(STAGING_DIR)/arm-linux/bin/ -B$(STAGING_DIR)/arm-linux/lib/ -isystem $(STAGING_DIR)/arm-linux/include $(TARGET_SOFT_FLOAT) \$$@" > $(GCC_BUILD_DIR1)/target_gcc
chmod a+x $(GCC_BUILD_DIR1)/target_gcc
(cd $(GCC_BUILD_DIR1); PATH=$(TARGET_PATH) AR=$(TARGET_CROSS)ar \
RANLIB=$(TARGET_CROSS)ranlib CC=$(HOSTCC) \
gcc_cv_as_hidden=no \
$(GCC_DIR)/configure \
--target=$(GNU_TARGET_NAME) \
--host=$(GNU_HOST_NAME) \
--build=$(GNU_HOST_NAME) \
--prefix=$(STAGING_DIR) \
--exec-prefix=$(STAGING_DIR) \
--bindir=$(STAGING_DIR)/bin \
--sbindir=$(STAGING_DIR)/sbin \
--sysconfdir=$(STAGING_DIR)/etc \
--datadir=$(STAGING_DIR)/share \
--includedir=$(STAGING_DIR)/include \
--libdir=$(STAGING_DIR)/lib \
--localstatedir=$(STAGING_DIR)/var \
--mandir=$(STAGING_DIR)/man \
--infodir=$(STAGING_DIR)/info \
--with-local-prefix=$(STAGING_DIR)/usr/local \
--oldincludedir=$(STAGING_DIR)/include $(MULTILIB) \
--enable-target-optspace $(DISABLE_NLS) --with-gnu-ld \
--disable-shared --enable-languages=c --disable-__cxa_atexit \
$(SOFT_FLOAT_CONFIG_OPTION) \
$(EXTRA_GCC_CONFIG_OPTIONS) --program-prefix=$(ARCH)-linux-);
touch $(GCC_BUILD_DIR1)/.configured
$(GCC_BUILD_DIR1)/.compiled: $(GCC_BUILD_DIR1)/.configured
PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR1) \
AR_FOR_TARGET=$(STAGING_DIR)/bin/$(ARCH)-linux-ar \
RANLIB_FOR_TARGET=$(STAGING_DIR)/bin/$(ARCH)-linux-ranlib \
CC_FOR_TARGET=$(GCC_BUILD_DIR1)/target_gcc \
GCC_FOR_TARGET=$(GCC_BUILD_DIR1)/target_gcc
touch $(GCC_BUILD_DIR1)/.compiled
$(STAGING_DIR)/bin/$(ARCH)-linux-gcc: $(GCC_BUILD_DIR1)/.compiled
PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR1) install;
#Cleanup then mess when --program-prefix mysteriously fails
-mv $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-cpp $(STAGING_DIR)/bin/$(ARCH)-linux-cpp
-mv $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-gcc $(STAGING_DIR)/bin/$(ARCH)-linux-gcc
if [ -n "$(strip $(TARGET_SOFT_FLOAT))" ] ; then \
for app in gcc c++ g++ ; do \
if [ -x $(STAGING_DIR)/bin/$(ARCH)-linux-$${app} ] ; then \
(cd $(STAGING_DIR)/bin; \
rm -f $(ARCH)-linux-$${app}$(TARGET_SOFT_FLOAT); \
echo -e "#!/bin/sh\nexec $(STAGING_DIR)/bin/$(ARCH)-linux-$${app} -msoft-float \$$@" > $(ARCH)-linux-$${app}$(TARGET_SOFT_FLOAT); \
chmod a+x $(ARCH)-linux-$${app}$(TARGET_SOFT_FLOAT); \
); \
fi; \
done; \
fi; \
rm -f $(STAGING_DIR)/bin/gccbug $(STAGING_DIR)/bin/gcov
rm -rf $(STAGING_DIR)/info $(STAGING_DIR)/man $(STAGING_DIR)/share/doc \
$(STAGING_DIR)/share/locale
gcc3_3_initial: binutils uclibc-configured $(STAGING_DIR)/bin/$(ARCH)-linux-gcc
gcc3_3_initial-clean:
rm -rf $(GCC_BUILD_DIR1)
rm -f $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)*
gcc3_3_initial-dirclean:
rm -rf $(GCC_BUILD_DIR1)
#############################################################
#
# second pass compiler build. Build the compiler targeting
# the newly built shared uClibc library.
#
#############################################################
GCC_BUILD_DIR2:=$(TOOL_BUILD_DIR)/gcc-3.3-final
$(GCC_DIR)/.g++_build_hacks: $(GCC_DIR)/.patched
#
# Hack up the soname for libstdc++
#
perl -i -p -e "s,\.so\.1,.so.0.9.9,g;" $(GCC_DIR)/gcc/config/t-slibgcc-elf-ver;
perl -i -p -e "s,-version-info.*[0-9]:[0-9]:[0-9],-version-info 9:9:0,g;" \
$(GCC_DIR)/libstdc++-v3/src/Makefile.am $(GCC_DIR)/libstdc++-v3/src/Makefile.in;
perl -i -p -e "s,3\.0\.0,9.9.0,g;" $(GCC_DIR)/libstdc++-v3/acinclude.m4 \
$(GCC_DIR)/libstdc++-v3/aclocal.m4 $(GCC_DIR)/libstdc++-v3/configure;
touch $(GCC_DIR)/.g++_build_hacks
$(GCC_BUILD_DIR2)/.configured: $(GCC_DIR)/.g++_build_hacks
mkdir -p $(GCC_BUILD_DIR2)
#echo -e "#!/bin/sh\nexec $(GCC_BUILD_DIR2)/gcc/g++ -B$(GCC_BUILD_DIR2)/gcc/ -B$(STAGING_DIR)/arm-linux/bin/ -B$(STAGING_DIR)/arm-linux/lib/ -isystem $(STAGING_DIR)/arm-linux/include $(TARGET_SOFT_FLOAT) \$$@" > $(GCC_BUILD_DIR2)/target_g++
echo -e "#!/bin/sh\nexec $(GCC_BUILD_DIR2)/gcc/xgcc -B$(GCC_BUILD_DIR2)/gcc/ -B$(STAGING_DIR)/arm-linux/bin/ -B$(STAGING_DIR)/arm-linux/lib/ -isystem $(STAGING_DIR)/arm-linux/include $(TARGET_SOFT_FLOAT) \$$@" > $(GCC_BUILD_DIR2)/target_g++
chmod a+x $(GCC_BUILD_DIR2)/target_g++
echo -e "#!/bin/sh\nexec $(GCC_BUILD_DIR2)/gcc/xgcc -B$(GCC_BUILD_DIR2)/gcc/ -B$(STAGING_DIR)/arm-linux/bin/ -B$(STAGING_DIR)/arm-linux/lib/ -isystem $(STAGING_DIR)/arm-linux/include $(TARGET_SOFT_FLOAT) \$$@" > $(GCC_BUILD_DIR2)/target_gcc
chmod a+x $(GCC_BUILD_DIR2)/target_gcc
(cd $(GCC_BUILD_DIR2); PATH=$(TARGET_PATH) AR=$(TARGET_CROSS)ar \
RANLIB=$(TARGET_CROSS)ranlib LD=$(TARGET_CROSS)ld \
NM=$(TARGET_CROSS)nm CC=$(HOSTCC) \
gcc_cv_as_hidden=no \
$(GCC_DIR)/configure \
--target=$(GNU_TARGET_NAME) \
--host=$(GNU_HOST_NAME) \
--build=$(GNU_HOST_NAME) \
--prefix=$(STAGING_DIR) \
--exec-prefix=$(STAGING_DIR) \
--bindir=$(STAGING_DIR)/bin \
--sbindir=$(STAGING_DIR)/sbin \
--sysconfdir=$(STAGING_DIR)/etc \
--datadir=$(STAGING_DIR)/share \
--localstatedir=$(STAGING_DIR)/var \
--mandir=$(STAGING_DIR)/man \
--infodir=$(STAGING_DIR)/info \
--with-local-prefix=$(STAGING_DIR)/usr/local \
--libdir=$(STAGING_DIR)/lib \
--includedir=$(STAGING_DIR)/include \
--with-gxx-include-dir=$(STAGING_DIR)/include/c++ \
--oldincludedir=$(STAGING_DIR)/include \
--enable-shared $(MULTILIB) \
--enable-target-optspace $(DISABLE_NLS) \
--with-gnu-ld --disable-__cxa_atexit \
--enable-languages=$(TARGET_LANGUAGES) \
$(EXTRA_GCC_CONFIG_OPTIONS) \
--program-prefix=$(ARCH)-linux- \
);
touch $(GCC_BUILD_DIR2)/.configured
$(GCC_BUILD_DIR2)/.compiled: $(GCC_BUILD_DIR2)/.configured
PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR2) \
CC=$(HOSTCC) \
AR_FOR_TARGET=$(TARGET_CROSS)ar RANLIB_FOR_TARGET=$(TARGET_CROSS)ranlib \
LD_FOR_TARGET=$(TARGET_CROSS)ld NM_FOR_TARGET=$(TARGET_CROSS)nm \
CC_FOR_TARGET=$(GCC_BUILD_DIR2)/target_gcc \
GCC_FOR_TARGET=$(GCC_BUILD_DIR2)/target_gcc \
CXX_FOR_TARGET=$(GCC_BUILD_DIR2)/target_g++
touch $(GCC_BUILD_DIR2)/.compiled
$(GCC_BUILD_DIR2)/.installed: $(GCC_BUILD_DIR2)/.compiled $(STAGING_DIR)/lib/libc.a
PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR2) install;
-mv $(STAGING_DIR)/bin/gcc $(STAGING_DIR)/usr/bin;
-mv $(STAGING_DIR)/bin/protoize $(STAGING_DIR)/usr/bin;
-mv $(STAGING_DIR)/bin/unprotoize $(STAGING_DIR)/usr/bin;
-mv $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-cpp $(STAGING_DIR)/bin/$(ARCH)-linux-cpp
-mv $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-gcc $(STAGING_DIR)/bin/$(ARCH)-linux-gcc
-mv $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-c++ $(STAGING_DIR)/bin/$(ARCH)-linux-c++
-mv $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-g++ $(STAGING_DIR)/bin/$(ARCH)-linux-g++
-mv $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-c++filt $(STAGING_DIR)/bin/$(ARCH)-linux-c++filt
rm -f $(STAGING_DIR)/bin/cpp $(STAGING_DIR)/bin/gcov $(STAGING_DIR)/bin/*gccbug
rm -f $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-$(ARCH)-linux-*
rm -rf $(STAGING_DIR)/info $(STAGING_DIR)/man $(STAGING_DIR)/share/doc \
$(STAGING_DIR)/share/locale
# Strip the host binaries
-strip --strip-all -R .note -R .comment $(STAGING_DIR)/bin/*
if [ -n "$(strip $(TARGET_SOFT_FLOAT))" ] ; then \
for app in gcc c++ g++ ; do \
if [ -x $(STAGING_DIR)/bin/$(ARCH)-linux-$${app} ] ; then \
(cd $(STAGING_DIR)/bin; \
rm -f $(ARCH)-linux-$${app}$(TARGET_SOFT_FLOAT); \
echo -e "#!/bin/sh\nexec $(STAGING_DIR)/bin/$(ARCH)-linux-$${app} -msoft-float \$$@" > $(ARCH)-linux-$${app}$(TARGET_SOFT_FLOAT); \
chmod a+x $(ARCH)-linux-$${app}$(TARGET_SOFT_FLOAT); \
); \
fi; \
done; \
fi; \
set -e; \
for app in cc gcc c89 cpp c++ g++ ; do \
if [ -x $(STAGING_DIR)/bin/$(ARCH)-linux-$${app} ] ; then \
(cd $(STAGING_DIR)/usr/bin; \
ln -fs ../../bin/$(ARCH)-linux-$${app} $${app}; \
); \
fi; \
done;
touch $(GCC_BUILD_DIR2)/.installed
ifneq ($(TARGET_DIR),)
$(TARGET_DIR)/lib/libstdc++.so.5.0.5: $(GCC_BUILD_DIR2)/.installed
cp -a $(STAGING_DIR)/lib/libstdc++.so* $(TARGET_DIR)/lib/
$(TARGET_DIR)/lib/libgcc_s.so.0.9.9: $(GCC_BUILD_DIR2)/.installed
cp -a $(STAGING_DIR)/lib/libgcc_s.so* $(TARGET_DIR)/lib/
# Enable applications to link with the shared ligbcc.
ln -sf $(STAGING_DIR)/lib/libgcc_s.so $(STAGING_DIR)/usr/lib/gcc-lib/$(ARCH)-linux/$(GCC_VERSION)/libgcc.so
ifeq ($(INSTALL_LIBSTDCPP),true)
GCC_TARGETS= $(TARGET_DIR)/lib/libgcc_s.so.0.9.9 $(TARGET_DIR)/lib/libstdc++.so.5.0.5
else
GCC_TARGETS= $(TARGET_DIR)/lib/libgcc_s.so.0.9.9
endif
endif
gcc3_3: binutils uclibc-configured gcc3_3_initial $(LIBFLOAT_TARGET) uclibc \
$(GCC_BUILD_DIR2)/.installed $(GCC_TARGETS)
gcc3_3-clean:
rm -rf $(GCC_BUILD_DIR2)
rm -f $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)*
gcc3_3-dirclean:
rm -rf $(GCC_BUILD_DIR2)
#############################################################
#
# Next build target gcc compiler
#
#############################################################
GCC_BUILD_DIR3:=$(BUILD_DIR)/gcc-3.3-target
TARGET_GCC_ARGS= $(TARGET_CONFIGURE_OPTS) \
AR_FOR_BUILD=ar \
AS_FOR_BUILD=as \
LD_FOR_BUILD=ld \
NM_FOR_BUILD=nm \
RANLIB_FOR_BUILD=ranlib \
HOST_CC=$(HOSTCC) \
CC_FOR_BUILD=$(HOSTCC) \
GCC_FOR_BUILD=$(HOSTCC) \
CXX_FOR_BUILD=$(HOSTCC) \
AR_FOR_TARGET=$(TARGET_CROSS)ar \
AS_FOR_TARGET=$(TARGET_CROSS)as \
LD_FOR_TARGET=$(TARGET_CROSS)ld \
NM_FOR_TARGET=$(TARGET_CROSS)nm \
CC="$(TARGET_CROSS)gcc$(TARGET_SOFT_FLOAT) -isystem $(STAGING_DIR)/include" \
GCC="$(TARGET_CROSS)gcc$(TARGET_SOFT_FLOAT) -isystem $(STAGING_DIR)/include" \
CXX="$(TARGET_CROSS)g++$(TARGET_SOFT_FLOAT) -isystem $(STAGING_DIR)/include" \
CC_FOR_TARGET="$(TARGET_CROSS)gcc$(TARGET_SOFT_FLOAT) -isystem $(STAGING_DIR)/include" \
GCC_FOR_TARGET="$(TARGET_CROSS)gcc$(TARGET_SOFT_FLOAT) -isystem $(STAGING_DIR)/include" \
CXX_FOR_TARGET="$(TARGET_CROSS)g++$(TARGET_SOFT_FLOAT) -isystem $(STAGING_DIR)/include" \
RANLIB_FOR_TARGET=$(TARGET_CROSS)ranlib
# We need to unpack a pristine source tree to avoid some of
# the previously applied hacks, which do not apply here...
$(GCC_BUILD_DIR3)/.unpacked: $(DL_DIR)/$(GCC_SOURCE)
$(GCC_CAT) $(DL_DIR)/$(GCC_SOURCE) | tar -C $(BUILD_DIR) -xvf -
mv $(BUILD_DIR)/gcc-$(GCC_VERSION) $(GCC_BUILD_DIR3)
touch $(GCC_BUILD_DIR3)/.unpacked
$(GCC_BUILD_DIR3)/.patched: $(GCC_BUILD_DIR3)/.unpacked
# Apply any files named gcc-*.patch from the source directory to gcc
$(SOURCE_DIR)/patch-kernel.sh $(GCC_BUILD_DIR3) $(SOURCE_DIR) gcc-*.patch
ifeq ("$(strip $(ARCH))","i386")
$(SOURCE_DIR)/patch-kernel.sh $(GCC_BUILD_DIR3) $(SOURCE_DIR) i386-gcc-*.patch
endif
touch $(GCC_BUILD_DIR3)/.patched
$(GCC_BUILD_DIR3)/.gcc3_3_build_hacks: $(GCC_BUILD_DIR3)/.patched
#
# Hack things to use the correct shared lib loader
#
(cd $(GCC_BUILD_DIR3); set -e; export LIST=`grep -lr -- "-dynamic-linker.*\.so[\.0-9]*" *`;\
if [ -n "$$LIST" ] ; then \
perl -i -p -e "s,-dynamic-linker.*\.so[\.0-9]*},\
-dynamic-linker /lib/ld-uClibc.so.0},;" $$LIST; fi);
#
# Prevent gcc from using the unwind-dw2-fde-glibc code
#
perl -i -p -e "s,^#ifndef inhibit_libc,#define inhibit_libc\n\
#ifndef inhibit_libc,g;" $(GCC_BUILD_DIR3)/gcc/unwind-dw2-fde-glibc.c;
#
# Hack up the soname for libstdc++
#
perl -i -p -e "s,\.so\.1,.so.0.9.9,g;" $(GCC_BUILD_DIR3)/gcc/config/t-slibgcc-elf-ver;
perl -i -p -e "s,-version-info.*[0-9]:[0-9]:[0-9],-version-info 9:9:0,g;" \
$(GCC_BUILD_DIR3)/libstdc++-v3/src/Makefile.am \
$(GCC_BUILD_DIR3)/libstdc++-v3/src/Makefile.in;
perl -i -p -e "s,3\.0\.0,9.9.0,g;" $(GCC_BUILD_DIR3)/libstdc++-v3/acinclude.m4 \
$(GCC_BUILD_DIR3)/libstdc++-v3/aclocal.m4 \
$(GCC_BUILD_DIR3)/libstdc++-v3/configure;
touch $(GCC_BUILD_DIR3)/.gcc3_3_build_hacks
$(GCC_BUILD_DIR3)/.configured: $(GCC_BUILD_DIR3)/.gcc3_3_build_hacks
mkdir -p $(GCC_BUILD_DIR3)
#(cd $(GCC_BUILD_DIR3); ln -fs $(ARCH)-linux build-$(GNU_TARGET_NAME))
(cd $(GCC_BUILD_DIR3); \
$(TARGET_GCC_ARGS) \
gcc_cv_as_hidden=no \
./configure \
--verbose \
--target=$(GNU_TARGET_NAME) \
--host=$(GNU_TARGET_NAME) \
--build=`./config.guess` \
--prefix=/usr \
--mandir=/usr/man \
--infodir=/usr/info \
--with-gxx-include-dir=/usr/include/c++/3.3 \
--enable-target-optspace \
--enable-shared \
$(MULTILIB) \
$(DISABLE_NLS) \
--with-gnu-ld --disable-__cxa_atexit \
--enable-languages=$(TARGET_LANGUAGES) \
$(EXTRA_GCC_CONFIG_OPTIONS) \
);
touch $(GCC_BUILD_DIR3)/.configured
#Fixme -- for locale handling?
#ifeq ($(ENABLE_LOCALE),true)
# --enable-clocale=gnu \
#endif
$(GCC_BUILD_DIR3)/.compiled: $(GCC_BUILD_DIR3)/.configured
$(MAKE) $(JLEVEL) $(TARGET_GCC_ARGS) -C $(GCC_BUILD_DIR3)
touch $(GCC_BUILD_DIR3)/.compiled
$(TARGET_DIR)/usr/bin/gcc: $(GCC_BUILD_DIR3)/.compiled
$(MAKE) $(JLEVEL) $(TARGET_GCC_ARGS) DESTDIR=$(TARGET_DIR) \
-C $(GCC_BUILD_DIR3) install
(cd $(TARGET_DIR)/usr/bin; ln -fs gcc cc)
(cd $(TARGET_DIR)/lib; ln -fs /usr/bin/cpp)
rm -rf $(TARGET_DIR)/usr/$(GNU_TARGET_NAME)/include
rm -rf $(TARGET_DIR)/usr/$(GNU_TARGET_NAME)/sys-include
rm -rf $(TARGET_DIR)/usr/include/include $(TARGET_DIR)/usr/usr
#-cp -dpf $(STAGING_DIR)/lib/libgcc* $(TARGET_DIR)/lib/
#-chmod a-x $(STAGING_DIR)/lib/*++*
#-cp -a $(STAGING_DIR)/lib/*++* $(TARGET_DIR)/lib/
#-cp -a $(STAGING_DIR)/include/c++ $(TARGET_DIR)/usr/include/
-mv $(TARGET_DIR)/lib/*.a $(TARGET_DIR)/usr/lib/
-mv $(TARGET_DIR)/lib/*.la $(TARGET_DIR)/usr/lib/
rm -f $(TARGET_DIR)/lib/libstdc++.so*
# A nasty hack to work around g++ adding -lgcc_eh to the link
-(cd $(TARGET_DIR)/usr/lib/gcc-lib/$(ARCH)-linux/$(GCC_VERSION)/ ; ln -s libgcc.a libgcc_eh.a)
# Make sure gcc does not think we are cross compiling
perl -i -p -e "s/^1/0/;" $(TARGET_DIR)/usr/lib/gcc-lib/$(ARCH)-linux/$(GCC_VERSION)/specs
-(cd $(TARGET_DIR)/bin; find -type f | xargs $(STRIP) > /dev/null 2>&1)
-(cd $(TARGET_DIR)/usr/bin; find -type f | xargs $(STRIP) > /dev/null 2>&1)
-(cd $(TARGET_DIR)/usr/lib/gcc-lib/$(ARCH)-linux/$(GCC_VERSION); $(STRIP) cc1 cc1plus collect2 > /dev/null 2>&1)
-(cd $(TARGET_DIR)/usr/lib; $(STRIP) libstdc++.so.*.*.* > /dev/null 2>&1)
-(cd $(TARGET_DIR)/lib; $(STRIP) libgcc_s.so.*.*.* > /dev/null 2>&1)
#
rm -f $(TARGET_DIR)/usr/lib/*.la*
rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
$(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
# Work around problem of missing syslimits.h
cp -f $(STAGING_DIR)/usr/lib/gcc-lib/$(ARCH)-linux/$(GCC_VERSION)/include/syslimits.h $(TARGET_DIR)/usr/lib/gcc-lib/$(ARCH)-linux/$(GCC_VERSION)/include/
# Enable applications to find the shared libgcc when linking (on target).
ln -sf $(TARGET_DIR)/lib/libgcc_s.so $(TARGET_DIR)/usr/lib/gcc-lib/$(ARCH)-linux/$(GCC_VERSION)/libgcc.so
(cd $(TARGET_DIR)/usr/lib/gcc-lib/$(ARCH)-linux/$(GCC_VERSION) ; ln -sf /lib/libgcc_s.so libgcc.so)
# These are in /lib, so...
rm -rf $(TARGET_DIR)/usr/lib/libgcc_s.so*
touch -c $(TARGET_DIR)/usr/bin/gcc
gcc3_3_target: uclibc_target binutils_target $(TARGET_DIR)/usr/bin/gcc
gcc3_3_target-clean:
rm -rf $(GCC_BUILD_DIR3)
rm -f $(TARGET_DIR)/bin/$(GNU_TARGET_NAME)*
gcc3_3_target-dirclean:
rm -rf $(GCC_BUILD_DIR3)
endif
Reference in New Issue View Git Blame Copy Permalink