kumquat-buildroot/board/asus/tinker
Giulio Benetti cb3b484505 configs/asus_tinker_rk3288: bump to Linux kernel 5.14.13 and u-boot 2021.10
This bumps to linux 5.14.13, linux-headers 5.14 and u-boot version
2021.10 and drop local uboot patch where CONFIG_SYS_BOOTM_LEN was set to
16MB because on u-boot 2021.10 it's now set to 64MB as default to make
room for Linux images.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-10-24 16:05:00 +02:00
..
extlinux.conf
genimage.cfg
post-build.sh
readme.txt

Tinker RK3288
=============

Tinker Board is a Single Board Computer (SBC) in an ultra-small form
factor that offers class-leading performance while leveraging outstanding
mechanical compatibility.

Tinker link:
https://www.asus.com/in/Single-Board-Computer/Tinker-Board/

Wiki link:
https://openedev.amarulasolutions.com/display/ODWIKI/Tinker+RK3288

How to build it
===============

  $ make asus_tinker_rk3288_defconfig

Then you can edit the build options using

  $ make menuconfig

Compile all and build rootfs image:

  $ make

Prepare your SDCard
===================

Buildroot generates a ready-to-use SD card image that you can flash directly to
the card. The image will be in output/images/sdcard.img.
You can write this image directly to an SD card device (i.e. /dev/xxx):

  $ sudo dd if=output/images/sdcard.img of=/dev/xxx
  $ sudo sync

Finally, you can insert the SD card to the Tinker RK3288 board and boot it.