NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
d058d61c56
kumquat-buildroot/board/terasic/de10nano_cyclone5
History
Gwenhael Goavec-Merou 8bab9cf65a configs/terasic_de10nano_cyclone5: new defconfig 
Terasic DE10 Nano is an SoCFPGA cycloneV based board.
References:
- https://www.terasic.com.tw/cgi-bin/page/archive.pl?Language=English&CategoryNo=205&No=1046
- https://rocketboards.org/foswiki/Documentation/DE10NanoDevelopmentBoard

Note: there is no dts in kernel (mainline or intel), but since DE0 Nano Soc is
similar, the corresponding dts is usually used

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-07-26 23:33:09 +02:00
..
barebox-env configs/terasic_de10nano_cyclone5: new defconfig 2021-07-26 23:33:09 +02:00
genimage.cfg configs/terasic_de10nano_cyclone5: new defconfig 2021-07-26 23:33:09 +02:00
readme.txt configs/terasic_de10nano_cyclone5: new defconfig 2021-07-26 23:33:09 +02:00

readme.txt 

Terasic DE10 Nano Development Board

Intro
=====

More information about this board can be found here:
https://rocketboards.org/foswiki/Documentation/DE10NanoDevelopmentBoard

Build
=====

First, load socrates config for buildroot

    make terasic_de10nano_cyclone5_defconfig

Build everything

    make

Following files will be generated in output/images

.
├── barebox-env
├── barebox-socfpga-de10_nano.img
├── barebox-socfpga-de10_nano-xload.img
├── boot.vfat
├── rootfs.ext2
├── rootfs.ext4 -> rootfs.ext2
├── rootfs.tar
├── sdcard.img
├── socfpga_cyclone5_de0_nano_soc.dtb
└── zImage

Creating bootable SD card
=========================

Simply invoke

dd if=output/images/sdcard.img of=/dev/sdX

Where X is your SD card device (not partition)