|
…
|
||
|---|---|---|
| .. | ||
| extlinux.conf | ||
| genimage.cfg | ||
| post-build.sh | ||
| readme.txt | ||
Intro
=====
This default configuration will allow you to start experimenting with the
buildroot environment for the Orangepi One Plus. With the current configuration
it will bring-up the board, and allow access through the serial console.
Orangepi One Plus link:
http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-One-Plus.html
Wiki link:
https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+One+Plus
This configuration uses U-Boot mainline and kernel mainline.
How to build
============
$ make orangepi_one_plus_defconfig
$ make
Note: you will need access to the internet to download the required
sources.
How to write the SD card
========================
Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.
Copy the bootable "sdcard.img" onto an SD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
$ sudo sync
Insert the micro SDcard in your Orangepi One Plus and power it up. The console
is on the serial line, 115200 8N1.