2c01eeece9
This patch adds support for the i.MX8M Nano EVK Board [1]. The final boot image is created from uboot and firmware binaries in post image script board/freescale/common/imx/imx8-bootloader-prepare.sh Note that this config is based on 4.19.35_1.1.0 ; hence, the kernel configuration needs host-openssl to build. [1] https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/evaluation-kit-for-the-i-mx-8m-nano-applications-processor:8MNANOD4-EVK Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com> Reviewed-by: Maeva Manuel <maeva.manuel@oss.nxp.com> Reviewed-by: Julien Olivain <julien.olivain@oss.nxp.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
74 lines
1.8 KiB
Plaintext
74 lines
1.8 KiB
Plaintext
***************************
|
|
Freescale i.MX8MN EVK board
|
|
***************************
|
|
|
|
This file documents the Buildroot support for the i.MX8M Nano EVK board.
|
|
|
|
Build
|
|
=====
|
|
|
|
First, configure Buildroot for the i.MX8MN EVK board:
|
|
|
|
make freescale_imx8mnevk_defconfig
|
|
|
|
Build all components:
|
|
|
|
make
|
|
|
|
You will find in output/images/ the following files:
|
|
- bl31.bin
|
|
- boot.vfat
|
|
- ddr4_201810_fw.bin
|
|
- ddr_fw.bin
|
|
- fsl-imx8mn-ddr4-evk.dtb
|
|
- Image
|
|
- imx8-boot-sd.bin
|
|
- rootfs.ext2
|
|
- rootfs.ext4
|
|
- rootfs.tar
|
|
- sdcard.img
|
|
- u-boot.bin
|
|
- u-boot.imx
|
|
- u-boot.itb
|
|
- u-boot-nodtb.bin
|
|
- u-boot-spl.bin
|
|
- u-boot-spl-ddr.bin
|
|
|
|
Create a bootable SD card
|
|
=========================
|
|
|
|
To determine the device associated to the SD card have a look in the
|
|
/proc/partitions file:
|
|
|
|
cat /proc/partitions
|
|
|
|
Buildroot prepares a bootable "sdcard.img" image in the output/images/
|
|
directory, ready to be dumped on a SD card. Launch the following
|
|
command as root:
|
|
|
|
dd if=output/images/sdcard.img of=/dev/<your-sd-device>
|
|
|
|
*** WARNING! This will destroy all the card content. Use with care! ***
|
|
|
|
For details about the medium image layout, see the definition in
|
|
board/freescale/common/imx/genimage.cfg.template_imx8.
|
|
|
|
Boot the i.MX8MN EVK board
|
|
==========================
|
|
|
|
To boot your newly created system (refer to the i.MX8MNano EVK Quick Start Guide
|
|
[1] for guidance):
|
|
- insert the SD card in the SD slot of the board;
|
|
- Configure the switches as follows (X = "don't care"):
|
|
SW1101: 1100XXXXXX [D1-D10]
|
|
SW1102: XXXXXXXXXX [D1-D10]
|
|
- put a micro USB cable into the Debug USB Port and connect using a terminal
|
|
emulator at 115200 bps, 8n1;
|
|
- power on the board.
|
|
|
|
Enjoy!
|
|
|
|
References
|
|
==========
|
|
[1] https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/evaluation-kit-for-the-i-mx-8m-nano-applications-processor:8MNANOD4-EVK
|