48bdd83741
In order to add ae350 RISC-V platform, rename ae3xx to ae300 for NDS32 architecture. AE300 (NDS32): - http://www.andestech.com/en/products-solutions/andeshape-platforms/ae300/ AE350 (RISC-V): - http://www.andestech.com/en/products-solutions/andeshape-platforms/ae350-axi-based-platform-pre-integrated-with-n25f-nx25f-a25-ax25/ Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> Signed-off-by: Alan Kao <alankao@andestech.com> Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
50 lines
916 B
Plaintext
50 lines
916 B
Plaintext
Intro
|
|
=====
|
|
|
|
Andestech(nds32) AE300 Platform
|
|
|
|
The AE300 prototype demonstrates the AE300 example platform on the FPGA.
|
|
It is composed of one Andestech(nds32) processor and AE300.
|
|
|
|
How to build it
|
|
===============
|
|
|
|
Configure Buildroot
|
|
-------------------
|
|
|
|
The andes_ae300_defconfig configuration is a sample configuration with
|
|
all that is required to bring the FPGA Development Board:
|
|
|
|
$ make andes_ae300_defconfig
|
|
|
|
Build everything
|
|
----------------
|
|
Note: you will need to have access to the network, since Buildroot will
|
|
download the packages' sources.
|
|
|
|
$ make
|
|
|
|
Result of the build
|
|
-------------------
|
|
|
|
After building, you should obtain this tree:
|
|
|
|
output/images/
|
|
+-- vmlinux
|
|
+-- rootfs.cpio
|
|
+-- rootfs.tar
|
|
|
|
How to run it
|
|
=============
|
|
|
|
Run
|
|
---
|
|
|
|
Setup the Console with the rate 38400/8-N-1.
|
|
|
|
$ cd output/images
|
|
$ ../host/bin/nds32le-linux-gdb vmlinux
|
|
$ target remote [your host]
|
|
$ lo
|
|
$ c
|