NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
cc031a0389
kumquat-buildroot/board/orangepi/orangepi-pc-plus
History
Sergey Matyukevich 81175e5580 board/orangepi-pc-plus: switch to GPT partitions for PARTLABEL support 
In new kernels sunxi-mmc driver has been switched to asynchronous probe.
As a result, mmc (SD/eMMC) indexes can be shuffled breaking board boot.
Switch to GPT partitions to use partition labels instead of explicit
mmcblk device names. Note that the default GPT partition table location
conflicts with the SPL location, so move GPT table after bootloaders.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2021-07-13 21:57:15 +02:00
..
boot.cmd board/orangepi-pc-plus: switch to GPT partitions for PARTLABEL support 2021-07-13 21:57:15 +02:00
genimage.cfg board/orangepi-pc-plus: switch to GPT partitions for PARTLABEL support 2021-07-13 21:57:15 +02:00
linux-extras.config
readme.txt

readme.txt 

OrangePi PC Plus

Intro
=====

This default configuration will allow you to start experimenting with the
buildroot environment for the OrangePi PC Plus. With the current configuration
it will bring-up the board, and allow access through the serial console.

How to build it
===============

Configure Buildroot:

    $ make orangepi_pc_plus_defconfig

Compile everything and build the SD card image:

    $ make

How to write the SD card
========================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX