kumquat-buildroot/configs/olimex_a20_olinuxino_lime_defconfig
Yann E. MORIN 674e099678 defconfigs: all use the headers from the kernel
For most defconfigs, it was trivial to deduce the kernel version, by
just reading the version string, which could be:
  - a standard upstream version string vX.Y.Z
  - a non-standard version string, but still containg the standard X.Y.Z

Those for which it was not so trivial were those hosted on git tree.
Since most were already using a custom linux-headers version, it could
be easily deduced from that. It was confirmed by browsing said git trees
and check the version there.

There are a few cases were there was a mismatch:

  - microzed:     uses a 3.18 kernel, but 3.8 headers; fixed.
  - xilinx_zc706: uses a 3.14 kernel, but 3.8 headers; fixed.
  - zedboard:     uses a 3.18 kernel, but 3.8 headers; fixed.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-02-06 10:59:15 +01:00

45 lines
1.2 KiB
Plaintext

# Architecture
BR2_arm=y
BR2_cortex_a7=y
BR2_ARM_EABIHF=y
# Linux headers same as kernel, a 4.4 series
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y
# System configuration
BR2_TARGET_GENERIC_HOSTNAME="a20-olinuxino"
BR2_TARGET_GENERIC_ISSUE="Welcome to OLinuXino!"
BR2_TARGET_GENERIC_GETTY=y
BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
BR2_ROOTFS_POST_BUILD_SCRIPT="board/olimex/a20_olinuxino/post-build.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="board/olimex/a20_olinuxino/boot.cmd $(TARGET_DIR)/boot"
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4"
BR2_LINUX_KERNEL_USE_DEFCONFIG=y
BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
BR2_LINUX_KERNEL_ZIMAGE=y
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun7i-a20-olinuxino-lime"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
# Filesystem
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
# BR2_TARGET_ROOTFS_TAR is not set
# Bootloaders
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BOARDNAME="A20-OLinuXino-Lime"
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.01"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_TARGET_UBOOT_FORMAT_BIN=y
BR2_TARGET_UBOOT_SPL=y
BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
# Additional tools
BR2_PACKAGE_HOST_UBOOT_TOOLS=y