e3c1c6e41e
This patch adds basic support for orangepi-zero board. Board support package includes the following components: - mainline kernel v4.11 - mainline u-boot v2017.03 - extra kernel config options: spidev, spi nor flash, wifi - dts patches to enable SPI NOR and spidev More details about this board are available here: - http://linux-sunxi.org/Orange_Pi_Zero Note that at the moment networking is not supported right out of the box. Ethernet submission to mainline kernel is a work in progress, see the latest dwmac-sun8i branches at https://github.com/montjoie/linux On-board SDIO WiFi chip XR819 is supported by off-the-tree wireless driver available at https://github.com/fifteenhex/xradio Changes from v1: * Send patch using proper subject * Update xr819 kernel dts patch: add compatible property [Peter: fix s/PC/Zero/ typo] Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com> |
||
|---|---|---|
| .. | ||
| patches/linux | ||
| boot.cmd | ||
| genimage.cfg | ||
| linux-extras.config | ||
| post-build.sh | ||
| post-image.sh | ||
| readme.txt | ||
OrangePi Zero
Intro
=====
This default configuration will allow you to start experimenting with the
buildroot environment for the OrangePi Zero. With the current configuration
it will bring-up the board, and allow access through the serial console.
How to build it
===============
Configure Buildroot:
$ make orangepi_zero_defconfig
Compile everything and build the SD card image:
$ make
How to write the SD card
========================
Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.
Copy the bootable "sdcard.img" onto an SD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX