kumquat-buildroot/board/beagleboardx15
Theo Debrouwere e1a0a8858e BeagleBoard X15: new board
This configuration provides a basic setup for using Buildroot
to create a sd-card image a BeagleBoard X15 board.

[Peter: use 512M ext4 partition, linux 4.9 and u-boot 2016.11]
Signed-off-by: Theo Debrouwere <Theo.Debrouwere@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-12-18 23:07:03 +01:00
..
genimage.cfg
post-image.sh
readme.txt

BeagleBoard X15

Intro
=====
This config currently supports the beagleboard x15,
and generates a barebone image.

The image must be flashed to a SD card to be used.

How to build it
===============

  $ make beagleboardx15_defconfig

Then you can edit the build options using

  $ make menuconfig

Compile all and build a sdcard image:

  $ make

Result of the build
-------------------

After building, you should get a tree like this:

  output/images/
  ├── am57xx-beagle-x15.dtb
  ├── am57xx-beagle-x15-revb1.dtb
  ├── boot.vfat
  ├── MLO
  ├── rootfs.ext2
  ├── rootfs.ext4
  ├── rootfs.tar
  ├── sdcard.img
  ├── u-boot.img
  ├── u-boot-spl.bin
  └── zImage

How to write the microSD card
=============================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX