|
…
|
||
|---|---|---|
| .. | ||
| boot.cmd | ||
| genimage.cfg | ||
| linux.fragment | ||
| post-image.sh | ||
| readme.txt | ||
| rock5b.its | ||
RADXA ROCK 5B ============== https://wiki.radxa.com/Rock5/hardware/5b Build: ====== $ make rock5b_defconfig $ make Files created in output directory ================================= output/images . ├── Image ├── Image.gz ├── boot.scr ├── boot.vfat ├── image.itb ├── rk3588-rock-5b.dtb ├── rk3588_bl31_v1.40.elf ├── rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.12.bin ├── rock5b.its ├── rootfs.ext2 ├── rootfs.ext4 ├── rootfs.tar ├── sdcard.img ├── u-boot-rockchip.bin └── u-boot.bin Creating bootable SD card: ========================== Simply invoke (as root) sudo dd if=output/images/sdcard.img of=/dev/sdX && sync Where X is your SD card device. Booting: ======== Serial console: --------------- The Rock 5B has a 40-pin GPIO header. Its layout can be seen here: https://wiki.radxa.com/Rock5/hardware/5b/gpio The Uart pins are as follows: pin 6: gnd pin 8: tx pin 10: rx Baudrate for this board is 1500000. Login: ------ Enter 'root' as login user, and the prompt is ready. wiki link: ---------- https://forum.radxa.com/c/rock5