NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
b936210b85
kumquat-buildroot/configs
History
Gustavo Zacarias 4e4545246f configs/pc_x86_64_{bios, efi}_defconfig: new samples 
Add two new sample defconfigs oriented towards real PC targets.

It adds two variants for BIOS and EFI boot strategy.

On the build side we enable eudev to autoload relevant kernel
modules/support when necessary.

It adds a bunch of drivers and extra filesystem support which is by no
means extensive/complete, mostly geared towards the hardware i've got at
hand to test with.
This is accomplished by adding on top of the Qemu x86_64 kernel sample
config.

Build connman since by using eudev network interfaces get renamed on
boot thus complicating any form of automatic and friendly bringup.
It also makes Wi-Fi configuration/support easier.

In principle these base defconfigs should work just fine for other
storage media != pendrive like sata or ssd disk, however driver support
isn't there quite yet, and pendrive is mostly supported by usb storage
plus the usual usb host controller drivers.

Tested on old Lenovo laptop (BIOS) and Asus Zenbook (EFI).

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-06-03 20:02:08 +02:00
..
acmesystems_aria_g25_128mb_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
acmesystems_aria_g25_256mb_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
acmesystems_arietta_g25_128mb_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
acmesystems_arietta_g25_256mb_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
altera_socdk_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
altera_sockit_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
arm_foundationv8_defconfig configs/arm_foundationv8: bump to Linux 4.4.3 2016-02-26 19:43:33 +01:00
arm_juno_defconfig board: add support for ARM Juno r0 and r1 Development Boards 2016-02-04 21:55:00 +01:00
armadeus_apf27_defconfig configs/*: drop explicit BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y 2016-04-25 14:07:58 +02:00
armadeus_apf28_defconfig configs/*: drop explicit BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y 2016-04-25 14:07:58 +02:00
armadeus_apf51_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
armadeus_apf9328_defconfig configs/*: drop explicit BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y 2016-04-25 14:07:58 +02:00
at91sam9g20dfc_defconfig defconfigs: all use the headers from the kernel 2016-02-06 10:59:15 +01:00
at91sam9g45m10ek_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
at91sam9rlek_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
at91sam9x5ek_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
at91sam9260eknf_defconfig configs/*: drop explicit BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y 2016-04-25 14:07:58 +02:00
atmel_sama5d2_xplained_mmc_defconfig configs: atmel: xplained boards: bump to linux4sam_5.3 2016-04-21 22:20:01 +02:00
atmel_sama5d3_xplained_defconfig configs: atmel: xplained boards: bump to linux4sam_5.3 2016-04-21 22:20:01 +02:00
atmel_sama5d3_xplained_mmc_defconfig configs: atmel: xplained boards: bump to linux4sam_5.3 2016-04-21 22:20:01 +02:00
atmel_sama5d3xek_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
atmel_sama5d4_xplained_defconfig configs: atmel: xplained boards: bump to linux4sam_5.3 2016-04-21 22:20:01 +02:00
atmel_sama5d4_xplained_mmc_defconfig configs: atmel: xplained boards: bump to linux4sam_5.3 2016-04-21 22:20:01 +02:00
atmel_sama5d4ek_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
beaglebone_defconfig configs: remove trailing directory slashes 2016-05-31 21:56:29 +02:00
calao_qil_a9260_defconfig configs: remove trailing directory slashes 2016-05-31 21:56:29 +02:00
calao_tny_a9g20_lpw_defconfig configs: remove trailing directory slashes 2016-05-31 21:56:29 +02:00
calao_usb_a9g20_lpw_defconfig configs: remove trailing directory slashes 2016-05-31 21:56:29 +02:00
calao_usb_a9260_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
calao_usb_a9263_defconfig configs: remove trailing directory slashes 2016-05-31 21:56:29 +02:00
ci20_defconfig defconfigs: all use the headers from the kernel 2016-02-06 10:59:15 +01:00
cubieboard2_defconfig configs: cubieboard2: use 4.6 kernel, u-boot 2016.05 2016-05-30 21:13:01 +02:00
cubieboard_defconfig defconfigs: all use the headers from the kernel 2016-02-06 10:59:15 +01:00
firefly_rk3288_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
firefly_rk3288_demo_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
freescale_imx6dlsabreauto_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
freescale_imx6dlsabresd_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
freescale_imx6qsabreauto_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
freescale_imx6qsabresd_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
freescale_imx6sololiteevk_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
freescale_imx6sxsabresd_defconfig freescale_imx6sxsabresd_defconfig: fix kernel headers version 2016-04-15 13:43:26 +02:00
freescale_imx6ulevk_defconfig configs/imx6ulevk: Use ext4 as filesystem type 2016-05-08 15:01:52 +02:00
freescale_imx7dsabresd_defconfig configs: new configuration for NXP i.MX7 SabreSD 2016-05-13 22:01:01 +02:00
freescale_imx28evk_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
freescale_imx31_3stack_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
freescale_mpc8315erdb_defconfig configs/freescale_mpc8315erdb: bump to kernel 4.5.3 2016-05-05 22:19:11 +02:00
freescale_p1010rdb_pa_defconfig configs/freescale_p1010rdb_pa: lock down binutils version 2016-05-05 22:18:56 +02:00
freescale_p2020ds_defconfig defconfigs: all use the headers from the kernel 2016-02-06 10:59:15 +01:00
galileo_defconfig configs: galileo: correct genimage dependencies 2016-03-13 22:56:05 +01:00
kb9202_defconfig defconfigs: all use the headers from the kernel 2016-02-06 10:59:15 +01:00
lego_ev3_defconfig defconfigs: all use the headers from the kernel 2016-02-06 10:59:15 +01:00
mini2440_defconfig defconfigs: all use the headers from the kernel 2016-02-06 10:59:15 +01:00
minnowboard_defconfig board/minnowboard: Unify Minnowboard and Minnowboard MAX boards 2016-04-18 23:19:25 +02:00
minnowboard_max_defconfig board/minnowboard: Unify Minnowboard and Minnowboard MAX boards 2016-04-18 23:19:25 +02:00
minnowboard_max-graphical_defconfig board/minnowboard-max: Add a X-based graphical defconfig 2016-04-18 23:19:25 +02:00
mx53loco_defconfig configs: mx53loco: use genimage to generate sdcard image 2016-05-31 21:27:47 +02:00
nitrogen6sx_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
nitrogen6x_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
nitrogen7_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
odroidc2_defconfig board: add support for Hardkernel ODROID-C2 Board 2016-04-23 22:15:44 +02:00
olimex_a20_olinuxino_lime2_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
olimex_a20_olinuxino_lime_defconfig olimex_a20_olinuxino_lime: bump u-boot to 2016.05 2016-05-27 22:30:33 +02:00
olimex_a20_olinuxino_lime_mali_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
olimex_a20_olinuxino_micro_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
olimex_imx233_olinuxino_defconfig olimex_imx233_olinuxino_defconfig: genimage support 2016-03-11 13:14:54 +01:00
openblocks_a6_defconfig configs/*: drop explicit BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y 2016-04-25 14:07:58 +02:00
orangepipc_defconfig orangepipc: defconfig: use 4.6 kernel, u-boot 2016.05 2016-05-17 00:16:53 +02:00
pandaboard_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
pc_x86_64_bios_defconfig configs/pc_x86_64_{bios, efi}_defconfig: new samples 2016-06-03 20:02:08 +02:00
pc_x86_64_efi_defconfig configs/pc_x86_64_{bios, efi}_defconfig: new samples 2016-06-03 20:02:08 +02:00
qemu_aarch64_virt_defconfig configs/qemu: bump to the latest version 2016-05-05 15:41:32 +02:00
qemu_arm_versatile_defconfig configs/qemu: bump to the latest version 2016-05-05 15:41:32 +02:00
qemu_arm_vexpress_defconfig configs/qemu: bump to the latest version 2016-05-05 15:41:32 +02:00
qemu_m68k_mcf5208_defconfig m68k: fix open issues with qemu coldfire 2016-05-11 15:27:15 +02:00
qemu_m68k_q800_defconfig configs/qemu: bump to the latest version 2016-05-05 15:41:32 +02:00
qemu_microblazebe_mmu_defconfig configs/qemu: bump to the latest version 2016-05-05 15:41:32 +02:00
qemu_microblazeel_mmu_defconfig configs/qemu: bump to the latest version 2016-05-05 15:41:32 +02:00
qemu_mips64_malta_defconfig configs/qemu: bump to the latest version 2016-05-05 15:41:32 +02:00
qemu_mips64el_malta_defconfig configs/qemu: bump to the latest version 2016-05-05 15:41:32 +02:00
qemu_mips_malta_defconfig configs/qemu: bump to the latest version 2016-05-05 15:41:32 +02:00
qemu_mipsel_malta_defconfig configs/qemu: bump to the latest version 2016-05-05 15:41:32 +02:00
qemu_ppc64_pseries_defconfig configs/qemu: bump to the latest version 2016-05-05 15:41:32 +02:00
qemu_ppc_g3beige_defconfig configs/qemu: bump to the latest version 2016-05-05 15:41:32 +02:00
qemu_ppc_mpc8544ds_defconfig configs/qemu: bump to the latest version 2016-05-05 15:41:32 +02:00
qemu_ppc_virtex_ml507_defconfig configs/qemu: bump to the latest version 2016-05-05 15:41:32 +02:00
qemu_sh4_r2d_defconfig configs/qemu: bump to the latest version 2016-05-05 15:41:32 +02:00
qemu_sh4eb_r2d_defconfig configs/qemu: bump to the latest version 2016-05-05 15:41:32 +02:00
qemu_sparc64_sun4u_defconfig configs/qemu: bump to the latest version 2016-05-05 15:41:32 +02:00
qemu_sparc_ss10_defconfig configs/qemu: bump to the latest version 2016-05-05 15:41:32 +02:00
qemu_x86_64_defconfig configs/qemu: bump to the latest version 2016-05-05 15:41:32 +02:00
qemu_x86_defconfig configs/qemu: bump to the latest version 2016-05-05 15:41:32 +02:00
qemu_xtensa_lx60_defconfig configs/qemu: bump to the latest version 2016-05-05 15:41:32 +02:00
qemu_xtensa_lx60_nommu_defconfig configs/qemu: bump to the latest version 2016-05-05 15:41:32 +02:00
qmx6_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
raspberrypi0_defconfig boards/raspberrypi0: new board 2016-05-08 15:54:30 +02:00
raspberrypi2_defconfig raspberrypi2_defconfig: bump to kernel version 4.4.8 2016-04-28 08:52:39 +02:00
raspberrypi3_defconfig raspberrypi3_defconfig: bump to kernel version 4.4.8 2016-04-28 08:52:44 +02:00
raspberrypi_defconfig raspberrypi_defconfig: bump to kernel version 4.4.8 2016-04-28 08:52:25 +02:00
riotboard_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
roseapplepi_defconfig boards: add roseapple pi board support 2016-05-26 10:35:55 +02:00
s6lx9_microboard_defconfig s6lx9_microboard_defconfig: lock kernel version 2016-04-15 11:48:43 +02:00
sheevaplug_defconfig sheevaplug: defconfig: use 4.6 kernel, u-boot 2016.05 2016-05-16 23:27:56 +02:00
snps_aarch64_vdk_defconfig defconfigs: all use the headers from the kernel 2016-02-06 10:59:15 +01:00
snps_axs101_defconfig defconfigs: all use the headers from the kernel 2016-02-06 10:59:15 +01:00
snps_axs103_defconfig defconfigs: all use the headers from the kernel 2016-02-06 10:59:15 +01:00
snps_hs38_smp_vdk_defconfig defconfigs: all use the headers from the kernel 2016-02-06 10:59:15 +01:00
snps_hs38_vdk_defconfig defconfigs: all use the headers from the kernel 2016-02-06 10:59:15 +01:00
stm32f429_disco_defconfig configs: remove trailing directory slashes 2016-05-31 21:56:29 +02:00
stm32f469_disco_defconfig configs: remove trailing directory slashes 2016-05-31 21:56:29 +02:00
telit_evk_pro3_defconfig configs/*: drop explicit BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y 2016-04-25 14:07:58 +02:00
ts5x00_defconfig board: rename ts to technologic 2016-04-21 23:06:08 +02:00
udoo_quad_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
via_imx6_vab820_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
wandboard_defconfig linux: use zImage by default on ARM 2016-04-05 22:23:54 +02:00
warpboard_defconfig configs: remove trailing directory slashes 2016-05-31 21:56:29 +02:00
zynq_microzed_defconfig configs: zynq: revive BR2_LINUX_KERNEL_UIMAGE 2016-05-28 15:50:31 +02:00
zynq_zc706_defconfig configs: zynq: revive BR2_LINUX_KERNEL_UIMAGE 2016-05-28 15:50:31 +02:00
zynq_zed_defconfig configs: zynq: revive BR2_LINUX_KERNEL_UIMAGE 2016-05-28 15:50:31 +02:00