209f98154f
Add initial support for Orangepi One Plus board with below features: - U-Boot 2018.09 - Linux 4.19.0-rc8 - Default packages from buildroot Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
38 lines
1011 B
Plaintext
38 lines
1011 B
Plaintext
Intro
|
|
=====
|
|
|
|
This default configuration will allow you to start experimenting with the
|
|
buildroot environment for the Orangepi One Plus. With the current configuration
|
|
it will bring-up the board, and allow access through the serial console.
|
|
|
|
Orangepi One Plus link:
|
|
http://www.orangepi.org/OrangePiOneplus/
|
|
|
|
Wiki link:
|
|
https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+One+Plus
|
|
|
|
This configuration uses U-Boot mainline and kernel mainline.
|
|
|
|
How to build
|
|
============
|
|
|
|
$ make orangepi_one_plus_defconfig
|
|
$ make
|
|
|
|
Note: you will need access to the internet to download the required
|
|
sources.
|
|
|
|
How to write the SD card
|
|
========================
|
|
|
|
Once the build process is finished you will have an image called "sdcard.img"
|
|
in the output/images/ directory.
|
|
|
|
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
|
|
|
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
|
$ sudo sync
|
|
|
|
Insert the micro SDcard in your Orangepi One Plus and power it up. The console
|
|
is on the serial line, 115200 8N1.
|