NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
b4705dfdd4
kumquat-buildroot/package/nodejs/nodejs.mk
Fabrice Fontaine 5ad7eb6c61 package/nodejs: force host-python3 
Build of nodejs fails if python 3.10 is installed on host.
As suggested by Arnout in
https://bugs.buildroot.org/show_bug.cgi?id=14451, use the same
workaround than in qt5webkit to force host-python3 (which is in version
3.9)

It should be noted that python 3.10 support has been added in version
14.18.2: https://github.com/nodejs/node/releases/tag/v14.18.2

Fixes:
 - https://bugs.buildroot.org/show_bug.cgi?id=14451

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2022-01-09 17:24:08 +01:00

265 lines
7.8 KiB
Makefile
Raw Blame History

################################################################################
#
# nodejs
#
################################################################################
NODEJS_VERSION = 14.18.2
NODEJS_SOURCE = node-v$(NODEJS_VERSION).tar.xz
NODEJS_SITE = http://nodejs.org/dist/v$(NODEJS_VERSION)
NODEJS_DEPENDENCIES = host-qemu host-python3 host-nodejs c-ares \
libuv zlib nghttp2 \
$(call qstrip,$(BR2_PACKAGE_NODEJS_MODULES_ADDITIONAL_DEPS))
HOST_NODEJS_DEPENDENCIES = host-icu host-libopenssl host-python3 host-zlib
NODEJS_INSTALL_STAGING = YES
NODEJS_LICENSE = MIT (core code); MIT, Apache and BSD family licenses (Bundled components)
NODEJS_LICENSE_FILES = LICENSE
NODEJS_CPE_ID_VENDOR = nodejs
NODEJS_CPE_ID_PRODUCT = node.js
NODEJS_CONF_OPTS = \
--shared-zlib \
--shared-cares \
--shared-libuv \
--shared-nghttp2 \
--without-dtrace \
--without-etw \
--cross-compiling \
--dest-os=linux
HOST_NODEJS_MAKE_OPTS = \
$(HOST_CONFIGURE_OPTS) \
CXXFLAGS="$(HOST_NODEJS_CXXFLAGS)" \
LDFLAGS.host="$(HOST_LDFLAGS)" \
NO_LOAD=cctest.target.mk \
PATH=$(@D)/bin:$(BR_PATH)
NODEJS_MAKE_OPTS = \
$(TARGET_CONFIGURE_OPTS) \
NO_LOAD=cctest.target.mk \
PATH=$(@D)/bin:$(BR_PATH) \
LDFLAGS="$(NODEJS_LDFLAGS)" \
LD="$(TARGET_CXX)"
# nodejs's build system uses python which can be a symlink to an unsupported
# python version (e.g. python 3.10 with nodejs 14.18.1). We work around this by
# forcing host-python3 early in the PATH, via a python->python3 symlink.
define NODEJS_PYTHON3_SYMLINK
mkdir -p $(@D)/bin
ln -sf $(HOST_DIR)/bin/python3 $(@D)/bin/python
endef
HOST_NODEJS_PRE_CONFIGURE_HOOKS += NODEJS_PYTHON3_SYMLINK
NODEJS_PRE_CONFIGURE_HOOKS += NODEJS_PYTHON3_SYMLINK
ifeq ($(BR2_PACKAGE_OPENSSL),y)
NODEJS_DEPENDENCIES += openssl
NODEJS_CONF_OPTS += --shared-openssl
else
NODEJS_CONF_OPTS += --without-ssl
endif
ifeq ($(BR2_PACKAGE_ICU),y)
NODEJS_DEPENDENCIES += icu
NODEJS_CONF_OPTS += --with-intl=system-icu
else
NODEJS_CONF_OPTS += --with-intl=none
endif
ifneq ($(BR2_PACKAGE_NODEJS_NPM),y)
NODEJS_CONF_OPTS += --without-npm
endif
define HOST_NODEJS_CONFIGURE_CMDS
(cd $(@D); \
$(HOST_CONFIGURE_OPTS) \
PATH=$(@D)/bin:$(BR_PATH) \
PYTHON=$(HOST_DIR)/bin/python3 \
$(HOST_DIR)/bin/python3 ./configure \
--prefix=$(HOST_DIR) \
--without-dtrace \
--without-etw \
--shared-openssl \
--shared-openssl-includes=$(HOST_DIR)/include \
--shared-openssl-libpath=$(HOST_DIR)/lib \
--shared-zlib \
--no-cross-compiling \
--with-intl=system-icu \
)
endef
NODEJS_HOST_TOOLS_V8 = \
torque \
gen-regexp-special-case \
bytecode_builtins_list_generator
NODEJS_HOST_TOOLS_NODE = mkcodecache
NODEJS_HOST_TOOLS = $(NODEJS_HOST_TOOLS_V8) $(NODEJS_HOST_TOOLS_NODE)
HOST_NODEJS_CXXFLAGS = $(HOST_CXXFLAGS) -DU_DISABLE_RENAMING=1
define HOST_NODEJS_BUILD_CMDS
$(HOST_MAKE_ENV) PYTHON=$(HOST_DIR)/bin/python3 \
$(MAKE) -C $(@D) \
$(HOST_NODEJS_MAKE_OPTS)
endef
define HOST_NODEJS_INSTALL_CMDS
$(HOST_MAKE_ENV) PYTHON=$(HOST_DIR)/bin/python3 \
$(MAKE) -C $(@D) install \
$(HOST_NODEJS_MAKE_OPTS)
$(foreach f,$(NODEJS_HOST_TOOLS), \
$(INSTALL) -m755 -D $(@D)/out/Release/$(f) $(HOST_DIR)/bin/$(f)
)
endef
ifeq ($(BR2_i386),y)
NODEJS_CPU = ia32
else ifeq ($(BR2_x86_64),y)
NODEJS_CPU = x64
else ifeq ($(BR2_mips),y)
NODEJS_CPU = mips
else ifeq ($(BR2_mipsel),y)
NODEJS_CPU = mipsel
else ifeq ($(BR2_arm),y)
NODEJS_CPU = arm
# V8 needs to know what floating point ABI the target is using.
NODEJS_ARM_FP = $(GCC_TARGET_FLOAT_ABI)
# it also wants to know which FPU to use, but only has support for
# vfp, vfpv3, vfpv3-d16 and neon.
ifeq ($(BR2_ARM_FPU_VFPV2),y)
NODEJS_ARM_FPU = vfp
# vfpv4 is a superset of vfpv3
else ifeq ($(BR2_ARM_FPU_VFPV3)$(BR2_ARM_FPU_VFPV4),y)
NODEJS_ARM_FPU = vfpv3
# vfpv4-d16 is a superset of vfpv3-d16
else ifeq ($(BR2_ARM_FPU_VFPV3D16)$(BR2_ARM_FPU_VFPV4D16),y)
NODEJS_ARM_FPU = vfpv3-d16
else ifeq ($(BR2_ARM_FPU_NEON),y)
NODEJS_ARM_FPU = neon
endif
else ifeq ($(BR2_aarch64),y)
NODEJS_CPU = arm64
endif
# MIPS architecture specific options
ifeq ($(BR2_mips)$(BR2_mipsel),y)
ifeq ($(BR2_MIPS_CPU_MIPS32R6),y)
NODEJS_MIPS_ARCH_VARIANT = r6
NODEJS_MIPS_FPU_MODE = fp64
else ifeq ($(BR2_MIPS_CPU_MIPS32R2),y)
NODEJS_MIPS_ARCH_VARIANT = r2
else ifeq ($(BR2_MIPS_CPU_MIPS32),y)
NODEJS_MIPS_ARCH_VARIANT = r1
endif
endif
NODEJS_LDFLAGS = $(TARGET_LDFLAGS)
ifeq ($(BR2_TOOLCHAIN_HAS_LIBATOMIC),y)
NODEJS_LDFLAGS += -latomic
endif
# V8's JIT infrastructure requires binaries such as mksnapshot and
# mkpeephole to be run in the host during the build. However, these
# binaries must have the same bit-width as the target (e.g. a x86_64
# host targeting ARMv6 needs to produce a 32-bit binary). To work around this
# issue, cross-compile the binaries for the target and run them on the
# host with QEMU, much like gobject-introspection.
define NODEJS_INSTALL_V8_QEMU_WRAPPER
$(INSTALL) -D -m 755 $(NODEJS_PKGDIR)/v8-qemu-wrapper.in \
$(@D)/out/Release/v8-qemu-wrapper
$(SED) "s%@QEMU_USER@%$(QEMU_USER)%g" \
$(@D)/out/Release/v8-qemu-wrapper
$(SED) "s%@TOOLCHAIN_HEADERS_VERSION@%$(BR2_TOOLCHAIN_HEADERS_AT_LEAST)%g" \
$(@D)/out/Release/v8-qemu-wrapper
$(SED) "s%@QEMU_USERMODE_ARGS@%$(call qstrip,$(BR2_PACKAGE_HOST_QEMU_USER_MODE_ARGS))%g" \
$(@D)/out/Release/v8-qemu-wrapper
endef
NODEJS_PRE_CONFIGURE_HOOKS += NODEJS_INSTALL_V8_QEMU_WRAPPER
define NODEJS_WRAPPER_FIXUP
$(SED) "s%@MAYBE_WRAPPER@%'<(PRODUCT_DIR)/v8-qemu-wrapper',%g" $(@D)/node.gyp
$(SED) "s%@MAYBE_WRAPPER@%'<(PRODUCT_DIR)/v8-qemu-wrapper',%g" $(@D)/tools/v8_gypfiles/v8.gyp
endef
NODEJS_PRE_CONFIGURE_HOOKS += NODEJS_WRAPPER_FIXUP
# Do not run the qemu-wrapper for the host build.
define HOST_NODEJS_WRAPPER_FIXUP
$(SED) "s%@MAYBE_WRAPPER@%%g" $(@D)/node.gyp
$(SED) "s%@MAYBE_WRAPPER@%%g" $(@D)/tools/v8_gypfiles/v8.gyp
endef
HOST_NODEJS_PRE_CONFIGURE_HOOKS += HOST_NODEJS_WRAPPER_FIXUP
define NODEJS_CONFIGURE_CMDS
(cd $(@D); \
$(TARGET_CONFIGURE_OPTS) \
PATH=$(@D)/bin:$(BR_PATH) \
LDFLAGS="$(NODEJS_LDFLAGS)" \
LD="$(TARGET_CXX)" \
PYTHON=$(HOST_DIR)/bin/python3 \
$(HOST_DIR)/bin/python3 ./configure \
--prefix=/usr \
--dest-cpu=$(NODEJS_CPU) \
$(if $(NODEJS_ARM_FP),--with-arm-float-abi=$(NODEJS_ARM_FP)) \
$(if $(NODEJS_ARM_FPU),--with-arm-fpu=$(NODEJS_ARM_FPU)) \
$(if $(NODEJS_MIPS_ARCH_VARIANT),--with-mips-arch-variant=$(NODEJS_MIPS_ARCH_VARIANT)) \
$(if $(NODEJS_MIPS_FPU_MODE),--with-mips-fpu-mode=$(NODEJS_MIPS_FPU_MODE)) \
$(NODEJS_CONF_OPTS) \
)
endef
define NODEJS_BUILD_CMDS
$(TARGET_MAKE_ENV) PYTHON=$(HOST_DIR)/bin/python3 \
$(MAKE) -C $(@D) \
$(NODEJS_MAKE_OPTS)
endef
#
# Build the list of modules to install.
#
NODEJS_MODULES_LIST= $(call qstrip,\
$(BR2_PACKAGE_NODEJS_MODULES_ADDITIONAL))
# Define NPM for other packages to use
NPM = $(TARGET_CONFIGURE_OPTS) \
LDFLAGS="$(NODEJS_LDFLAGS)" \
LD="$(TARGET_CXX)" \
npm_config_arch=$(NODEJS_CPU) \
npm_config_target_arch=$(NODEJS_CPU) \
npm_config_build_from_source=true \
npm_config_nodedir=$(BUILD_DIR)/nodejs-$(NODEJS_VERSION) \
npm_config_prefix=$(TARGET_DIR)/usr \
npm_config_cache=$(BUILD_DIR)/.npm-cache \
$(HOST_DIR)/bin/npm
#
# We can only call NPM if there's something to install.
#
ifneq ($(NODEJS_MODULES_LIST),)
define NODEJS_INSTALL_MODULES
# If you're having trouble with module installation, adding -d to the
# npm install call below and setting npm_config_rollback=false can both
# help in diagnosing the problem.
$(NPM) install -g $(NODEJS_MODULES_LIST)
endef
endif
define NODEJS_INSTALL_STAGING_CMDS
$(TARGET_MAKE_ENV) PYTHON=$(HOST_DIR)/bin/python3 \
$(MAKE) -C $(@D) install \
DESTDIR=$(STAGING_DIR) \
$(NODEJS_MAKE_OPTS)
endef
define NODEJS_INSTALL_TARGET_CMDS
$(TARGET_MAKE_ENV) PYTHON=$(HOST_DIR)/bin/python3 \
$(MAKE) -C $(@D) install \
DESTDIR=$(TARGET_DIR) \
$(NODEJS_MAKE_OPTS)
$(NODEJS_INSTALL_MODULES)
endef
# node.js configure is a Python script and does not use autotools
$(eval $(generic-package))
$(eval $(host-generic-package))
Reference in New Issue View Git Blame Copy Permalink