kumquat-buildroot/board/minnowboard
Vincent Stehlé 7bdbee2311 configs/minnowboard_max: bump kernel to 4.6.1
Also, rebase kernel config and adapt kernel command line in grub config file
to follow mmc numbering change.

[Peter: drop now unused linux-4.4.config]
Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com>
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-06-06 21:39:06 +02:00
..
fs-overlay-graphical board/minnowboard-max: Add a X-based graphical defconfig 2016-04-18 23:19:25 +02:00
genimage.cfg
grub-minnowboard-max.cfg configs/minnowboard_max: bump kernel to 4.6.1 2016-06-06 21:39:06 +02:00
grub-minnowboard.cfg board/minnowboard: Unify Minnowboard and Minnowboard MAX boards 2016-04-18 23:19:25 +02:00
linux-3.8.config
linux-4.6.config configs/minnowboard_max: bump kernel to 4.6.1 2016-06-06 21:39:06 +02:00
post-build.sh board/minnowboard: Unify Minnowboard and Minnowboard MAX boards 2016-04-18 23:19:25 +02:00
post-image.sh
readme.txt board/minnowboard: Unify Minnowboard and Minnowboard MAX boards 2016-04-18 23:19:25 +02:00

How to get started with the MinnowBoard (MAX)
=============================================

1. Build

  Apply the defconfig:

  $ make minnowboard_defconfig

  Or, for the Minnowboard MAX board:

  $ make minnowboard_max_defconfig

  Add any additional packages required and build:

  $ make

2. Write the SD card

  The build process will create a SD card image in output/images.
  Write the image to an mSD card, insert into the MinnowBoard
  and power the board on.

  $ dd if=output/images/sdcard.img of=/dev/mmcblk0; sync

3. Enjoy

Additional information about this board can be found at
http://www.minnowboard.org/.