NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
ac99683578
kumquat-buildroot/toolchain/toolchain-external/Config.in
Adrien Béraud a20cb38659 arch: add support for "jaguar" AMD CPU optimisations 
AMD Jaguar ( https://en.wikipedia.org/wiki/Jaguar_%28microarchitecture%29 ) is
suddenly a popular architecture since it is used in the PS4 and the XBox One.
Many embedded systems are also likely to use it in the next years.

This patch adds support for GCC architecture-specific optimisations and
tuning for these CPUs.
These optimizations are available with GCC 4.8+.

Signed-off-by: Adrien Beraud <adrien.beraud@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-01-15 23:19:46 +01:00

1083 lines
40 KiB
Plaintext
Raw Blame History

if BR2_TOOLCHAIN_EXTERNAL
choice
prompt "Toolchain"
comment "(e)glibc toolchains only available with shared lib support"
depends on BR2_PREFER_STATIC_LIB
config BR2_TOOLCHAIN_EXTERNAL_LINARO_2013_11
bool "Linaro 2013.11"
depends on BR2_arm
depends on BR2_GCC_TARGET_ARCH = "armv7-a"
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on BR2_ARM_EABIHF
depends on !BR2_PREFER_STATIC_LIB
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Linaro toolchain for the ARM architecture. It uses Linaro
GCC 2013.11 (based on gcc 4.8), Linaro GDB 2013.10 (based on
GDB 7.6), eglibc 2.18, Binutils 2013.10 (based on 2.23). It
generates code that runs on all Cortex-A profile devices,
but tuned for the Cortex-A9. The code generated is Thumb 2,
with the hard floating point calling convention, and uses
the VFPv3-D16 FPU instructions.
To use this toolchain, you must disable soft float usage.
config BR2_TOOLCHAIN_EXTERNAL_LINARO_2013_10
bool "Linaro 2013.10"
depends on BR2_arm
depends on BR2_GCC_TARGET_ARCH = "armv7-a"
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on BR2_ARM_EABIHF
depends on !BR2_PREFER_STATIC_LIB
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Linaro toolchain for the ARM architecture. It uses Linaro
GCC 2013.10 (based on gcc 4.8), Linaro GDB 2013.10 (based on
GDB 7.6), eglibc 2.18, Binutils 2013.10 (based on 2.23). It
generates code that runs on all Cortex-A profile devices,
but tuned for the Cortex-A9. The code generated is Thumb 2,
with the hard floating point calling convention, and uses
the VFPv3-D16 FPU instructions.
To use this toolchain, you must disable soft float usage.
config BR2_TOOLCHAIN_EXTERNAL_LINARO_2013_09
bool "Linaro 2013.09"
depends on BR2_arm
depends on BR2_GCC_TARGET_ARCH = "armv7-a"
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on BR2_ARM_EABIHF
depends on !BR2_PREFER_STATIC_LIB
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Linaro toolchain for the ARM architecture. It uses Linaro
GCC 2013.09 (based on gcc 4.8), Linaro GDB 2013.05 (based on
GDB 7.6), eglibc 2.17, Binutils 2013.06 (based on 2.23). It
generates code that runs on all Cortex-A profile devices,
but tuned for the Cortex-A9. The code generated is Thumb 2,
with the hard floating point calling convention, and uses
the VFPv3-D16 FPU instructions.
To use this toolchain, you must disable soft float usage.
comment "Linaro toolchains available for Cortex-A + EABIhf"
depends on BR2_arm
depends on BR2_GCC_TARGET_ARCH != "armv7-a" || !BR2_ARM_EABIHF
depends on !BR2_PREFER_STATIC_LIB
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201311
bool "Sourcery CodeBench ARM 2013.11"
depends on BR2_arm
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on BR2_ARM_EABI
depends on !BR2_PREFER_STATIC_LIB
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Sourcery CodeBench toolchain for the ARM architecture, from
Mentor Graphics. It uses gcc 4.8.1, binutils 2.23.52, glibc
2.18 and gdb 7.6.50, kernel headers 3.11. It has support
for the following variants:
- ARMv5TE, little endian, soft-float, glibc
Select ARM926T, ARM10T, XScale or another ARMv5 core
Select BR2_SOFT_FLOAT
- ARMv4T, little endian, soft-float, glibc
Select ARM720T, ARM920T, ARM922T or another ARMv4 core
Select BR2_SOFT_FLOAT
- ARMv7-A, Thumb 2, little endian, soft-float, glibc
Select Cortex-A8, Cortex-A9 or another ARMv7-A core
Select BR2_SOFT_FLOAT
Set BR2_TARGET_OPTIMIZATION to -mthumb
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201305
bool "Sourcery CodeBench ARM 2013.05"
depends on BR2_arm
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on BR2_ARM_EABI
depends on !BR2_PREFER_STATIC_LIB
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Sourcery CodeBench toolchain for the ARM architecture, from
Mentor Graphics. It uses gcc 4.7.3, binutils 2.23.52, glibc
2.17 and gdb 7.4.50, kernel headers 3.8.2. It has support
for the following variants:
- ARMv5TE, little endian, soft-float, glibc
Select ARM926T, ARM10T, XScale or another ARMv5 core
Select BR2_SOFT_FLOAT
- ARMv4T, little endian, soft-float, glibc
Select ARM720T, ARM920T, ARM922T or another ARMv4 core
Select BR2_SOFT_FLOAT
- ARMv7-A, Thumb 2, little endian, soft-float, glibc
Select Cortex-A8, Cortex-A9 or another ARMv7-A core
Select BR2_SOFT_FLOAT
Set BR2_TARGET_OPTIMIZATION to -mthumb
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201203
bool "Sourcery CodeBench ARM 2012.03"
depends on BR2_arm
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on BR2_ARM_EABI
depends on !BR2_PREFER_STATIC_LIB
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Sourcery CodeBench toolchain for the ARM architecture, from
Mentor Graphics. It uses gcc 4.6.3, binutils 2.21.53, glibc
2.15 and gdb 7.2.50, kernel headers 3.2.10. It has support
for the following variants:
- ARMv5TE, little endian, soft-float, glibc
Select ARM926T, ARM10T, XScale or another ARMv5 core
Select BR2_SOFT_FLOAT
- ARMv4T, little endian, soft-float, glibc
Select ARM720T, ARM920T, ARM922T or another ARMv4 core
Select BR2_SOFT_FLOAT
- ARMv7-A, Thumb 2, little endian, soft-float, glibc
Select Cortex-A8, Cortex-A9 or another ARMv7-A core
Select BR2_SOFT_FLOAT
Set BR2_TARGET_OPTIMIZATION to -mthumb
comment "Sourcery CodeBench toolchains available for the EABI ABI"
depends on BR2_arm
depends on !BR2_ARM_EABI
depends on !BR2_PREFER_STATIC_LIB
config BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV7A_201109
bool "Arago ARMv7 2011.09"
depends on BR2_arm
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on BR2_GCC_TARGET_ARCH = "armv7-a"
depends on BR2_ARM_EABI
depends on BR2_ARM_CPU_HAS_VFPV3 || BR2_ARM_CPU_MAYBE_HAS_VFPV3
depends on !BR2_PREFER_STATIC_LIB
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Texas Instruments Arago 2011.09 toolchain, with gcc 4.5.3,
binutils 2.20.1, glibc 2.12, gdb 7.2.
This toolchain uses -mfloat-abi=softfp (i.e can use FPU
instructions, but passes floating point function arguments
in integer registers), and requires a VFPv3 floating point
unit to work properly. This unit is available on most
Cortex-A ARM processors, but not all.
config BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV5TE_201109
bool "Arago ARMv5 2011.09"
depends on BR2_arm
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on BR2_GCC_TARGET_ARCH != "armv4t" && \
BR2_GCC_TARGET_ARCH != "armv4" && \
BR2_GCC_TARGET_ARCH != "armv5t"
depends on BR2_ARM_EABI
depends on !BR2_PREFER_STATIC_LIB
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Texas Instruments Arago ARMv5 2011.09 toolchain, with gcc
4.5.3, binutils 2.20.1, glibc 2.12, gdb 7.2.
This toolchain uses software-floating point.
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311
bool "Sourcery CodeBench MIPS 2013.11"
depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_MIPS_NABI32
depends on !BR2_PREFER_STATIC_LIB
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Sourcery CodeBench toolchain for the MIPS architecture, from
Mentor Graphics. It uses gcc 4.8.1, binutils 2.23.52, glibc
2.18, uClibc 0.9.30 and gdb 7.6.50, kernel headers
3.11. It has support for the following variants:
- MIPS32 O32 big endian glibc
Select a MIPS generic core
Disable BR2_SOFT_FLOAT
- MIPS64 big endian glibc
Select a MIPS64 generic core
Select the n64 ABI
Disable BR2_SOFT_FLOAT
- MIPS32 O32 little endian glibc
Select a MIPS generic core
Disable BR2_SOFT_FLOAT
- MIPS64 little endian glibc
Select a MIPS64 generic core
Select the n64 ABI
Disable BR2_SOFT_FLOAT
- MIPS32 big endian soft float glibc
Select a MIPS generic core
Select BR2_SOFT_FLOAT
- MIPS64 big endian soft float glibc
Select a MIPS64 generic core
Select the n64 ABI
Select BR2_SOFT_FLOAT
- MIPS32 little endian soft float glibc
Select a MIPS generic core
Select BR2_SOFT_FLOAT
- MIPS64 little endian soft float glibc
Select a MIPS64 generic core
Select the n64 ABI
Select BR2_SOFT_FLOAT
- MIPS32 big endian microMIPS glibc
Select a MIPS generic core
Disable BR2_SOFT_FLOAT
Set BR2_TARGET_OPTIMIZATION to -mips16
- MIPS32 little endian microMIPS glibc
Select a MIPS generic core
Disable BR2_SOFT_FLOAT
Set BR2_TARGET_OPTIMIZATION to -mips16
- MIPS32 big endian soft float microMIPS glibc
Select a MIPS generic core
Select BR2_SOFT_FLOAT
Set BR2_TARGET_OPTIMIZATION to -mips16
- MIPS32 little endian soft float microMIPS glibc
Select a MIPS generic core
Select BR2_SOFT_FLOAT
Set BR2_TARGET_OPTIMIZATION to -mips16
- MIPS32 big endian uclibc
Not usable in Buildroot yet.
- MIPS32 little endian uclibc
Not usable in Buildroot yet.
- MIPS32 big endian soft float uclibc
Not usable in Buildroot yet.
- MIPS32 little endian soft float uclibc
Not usable in Buildroot yet.
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305
bool "Sourcery CodeBench MIPS 2013.05"
depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_MIPS_NABI32
depends on !BR2_PREFER_STATIC_LIB
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Sourcery CodeBench toolchain for the MIPS architecture, from
Mentor Graphics. It uses gcc 4.7.3, binutils 2.23.52, glibc
2.17, uClibc 0.9.30 and gdb 7.4.50, kernel headers
3.8.2. It has support for the following variants:
- MIPS32 O32 big endian glibc
Select a MIPS generic core
Disable BR2_SOFT_FLOAT
- MIPS64 big endian glibc
Select a MIPS64 generic core
Select the n64 ABI
Disable BR2_SOFT_FLOAT
- MIPS32 O32 little endian glibc
Select a MIPS generic core
Disable BR2_SOFT_FLOAT
- MIPS64 little endian glibc
Select a MIPS64 generic core
Select the n64 ABI
Disable BR2_SOFT_FLOAT
- MIPS32 big endian soft float glibc
Select a MIPS generic core
Select BR2_SOFT_FLOAT
- MIPS64 big endian soft float glibc
Select a MIPS64 generic core
Select the n64 ABI
Select BR2_SOFT_FLOAT
- MIPS32 little endian soft float glibc
Select a MIPS generic core
Select BR2_SOFT_FLOAT
- MIPS64 little endian soft float glibc
Select a MIPS64 generic core
Select the n64 ABI
Select BR2_SOFT_FLOAT
- MIPS32 big endian microMIPS glibc
Select a MIPS generic core
Disable BR2_SOFT_FLOAT
Set BR2_TARGET_OPTIMIZATION to -mips16
- MIPS32 little endian microMIPS glibc
Select a MIPS generic core
Disable BR2_SOFT_FLOAT
Set BR2_TARGET_OPTIMIZATION to -mips16
- MIPS32 big endian soft float microMIPS glibc
Select a MIPS generic core
Select BR2_SOFT_FLOAT
Set BR2_TARGET_OPTIMIZATION to -mips16
- MIPS32 little endian soft float microMIPS glibc
Select a MIPS generic core
Select BR2_SOFT_FLOAT
Set BR2_TARGET_OPTIMIZATION to -mips16
- MIPS32 big endian uclibc
Not usable in Buildroot yet.
- MIPS32 little endian uclibc
Not usable in Buildroot yet.
- MIPS32 big endian soft float uclibc
Not usable in Buildroot yet.
- MIPS32 little endian soft float uclibc
Not usable in Buildroot yet.
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201209
bool "Sourcery CodeBench MIPS 2012.09"
depends on BR2_mips || BR2_mipsel
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_MIPS_NABI32
depends on !BR2_PREFER_STATIC_LIB
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Sourcery CodeBench toolchain for the MIPS architecture, from
Mentor Graphics. It uses gcc 4.7.2, binutils 2.23.51, glibc
2.16, uClibc 0.9.30 and gdb 7.4.50, kernel headers
3.5.4. It has support for the following variants:
- MIPS32 O32 big endian glibc
Select a MIPS generic core
Disable BR2_SOFT_FLOAT
- MIPS64 big endian glibc
Select a MIPS64 generic core
Select the n64 ABI
Disable BR2_SOFT_FLOAT
- MIPS32 O32 little endian glibc
Select a MIPS generic core
Disable BR2_SOFT_FLOAT
- MIPS64 little endian glibc
Select a MIPS64 generic core
Select the n64 ABI
Disable BR2_SOFT_FLOAT
- MIPS32 big endian soft float glibc
Select a MIPS generic core
Select BR2_SOFT_FLOAT
- MIPS64 big endian soft float glibc
Select a MIPS64 generic core
Select the n64 ABI
Select BR2_SOFT_FLOAT
- MIPS32 little endian soft float glibc
Select a MIPS generic core
Select BR2_SOFT_FLOAT
- MIPS64 little endian soft float glibc
Select a MIPS64 generic core
Select the n64 ABI
Select BR2_SOFT_FLOAT
- MIPS32 big endian microMIPS glibc
Select a MIPS generic core
Disable BR2_SOFT_FLOAT
Set BR2_TARGET_OPTIMIZATION to -mips16
- MIPS32 little endian microMIPS glibc
Select a MIPS generic core
Disable BR2_SOFT_FLOAT
Set BR2_TARGET_OPTIMIZATION to -mips16
- MIPS32 big endian soft float microMIPS glibc
Select a MIPS generic core
Select BR2_SOFT_FLOAT
Set BR2_TARGET_OPTIMIZATION to -mips16
- MIPS32 little endian soft float microMIPS glibc
Select a MIPS generic core
Select BR2_SOFT_FLOAT
Set BR2_TARGET_OPTIMIZATION to -mips16
- MIPS32 big endian uclibc
Not usable in Buildroot yet.
- MIPS32 little endian uclibc
Not usable in Buildroot yet.
- MIPS32 big endian soft float uclibc
Not usable in Buildroot yet.
- MIPS32 little endian soft float uclibc
Not usable in Buildroot yet.
comment "Sourcery CodeBench toolchains are only available for MIPS/MIPS64 o32 and n64"
depends on BR2_MIPS_NABI32
depends on !BR2_PREFER_STATIC_LIB
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305
bool "Sourcery CodeBench Nios-II 2013.05"
depends on BR2_nios2
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_PREFER_STATIC_LIB
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Sourcery CodeBench toolchain for the Nios-II architecture,
from Mentor Graphics. It uses gcc 4.7.3, binutils 2.23.52,
glibc 2.17, gdb 7.4.50 and kernel headers 3.7.0.
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103
bool "Sourcery CodeBench PowerPC 2011.03"
depends on BR2_powerpc
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_PREFER_STATIC_LIB
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Sourcery CodeBench toolchain for the PowerPC architecture,
from Mentor Graphics. It uses gcc 4.5.2, binutils 2.20.51,
glibc 2.13, gdb 7.2.50 and kernel headers 2.6.38. It has
support for the following variants:
- 603 glibc, 32 bits
Select a generic PowerPC core
Disable BR2_SOFT_FLOAT
- 603 soft float glibc, 32 bits
Select a generic PowerPC core
Enable BR2_SOFT_FLOAT
- e600 altivec glibc, 32 bits
Set BR2_TARGET_OPTIMIZATION to -te600
- e500v1 glibc, 32 bits
Set BR2_TARGET_OPTIMIZATION to -te500v1
- e500v2 glibc, 32 bits
Set BR2_TARGET_OPTIMIZATION to -te500v2
- e500mc glibc, 32 bits
Set BR2_TARGET_OPTIMIZATION to -te500mc
- 970 glibc hard-float, 64 bits
Set BR2_TARGET_OPTIMIZATION to -m64
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009
bool "Sourcery CodeBench PowerPC 2010.09"
depends on BR2_powerpc
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_PREFER_STATIC_LIB
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Sourcery CodeBench toolchain for the PowerPC architecture,
from Mentor Graphics. It uses gcc 4.5.1, binutils 2.20,
glibc 2.11, gdb 7.2.50 and kernel headers 2.6.35.2. It has
support for the following variants:
- 603 glibc, 32 bits
Select a generic PowerPC core
Disable BR2_SOFT_FLOAT
- 603 soft float glibc, 32 bits
Select a generic PowerPC core
Enable BR2_SOFT_FLOAT
- e600 altivec glibc, 32 bits
Set BR2_TARGET_OPTIMIZATION to -te600
- e500v1 glibc, 32 bits
Set BR2_TARGET_OPTIMIZATION to -te500v1
- e500v2 glibc, 32 bits
Set BR2_TARGET_OPTIMIZATION to -te500v2
- e500mc glibc, 32 bits
Set BR2_TARGET_OPTIMIZATION to -te500mc
- 970 glibc hard-float, 64 bits
Set BR2_TARGET_OPTIMIZATION to -m64
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201209
bool "Sourcery CodeBench SH 2012.09"
depends on BR2_sh4a || BR2_sh4aeb
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_PREFER_STATIC_LIB
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Sourcery CodeBench toolchain for the SuperH architecture,
from Mentor Graphics. It uses gcc 4.7.2, binutils 2.23.51,
glibc 2.16, uClibc 0.9.30, gdb 7.4.50 and kernel headers
3.5.4. It has support for the following variants:
- SH4A, glibc, little endian
Default.
- SH4A, glibc, big endian
Add -mb to BR2_TARGET_OPTIMIZATION
- SH4A, uClibc, little endian
Not usable in Buildroot yet.
- SH4A, uClibc, big endian
Not usable in Buildroot yet.
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201203
bool "Sourcery CodeBench SH 2012.03"
depends on BR2_sh4a || BR2_sh4aeb
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_PREFER_STATIC_LIB
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Sourcery CodeBench toolchain for the SuperH architecture,
from Mentor Graphics. It uses gcc 4.6.3, binutils 2.21.53,
glibc 2.15, uClibc 0.9.30, gdb 7.2.50 and kernel headers
3.2.10. It has support for the following variants:
- SH4A, glibc, little endian
Default.
- SH4A, glibc, big endian
Add -mb to BR2_TARGET_OPTIMIZATION
- SH4A, uClibc, little endian
Not usable in Buildroot yet.
- SH4A, uClibc, big endian
Not usable in Buildroot yet.
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103
bool "Sourcery CodeBench SH 2011.03"
depends on BR2_sh4a || BR2_sh4aeb
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_PREFER_STATIC_LIB
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Sourcery CodeBench toolchain for the SuperH architecture,
from Mentor Graphics. It uses gcc 4.5.2, binutils 2.20,
glibc 2.13, uClibc 0.9.30, gdb 7.2.50 and kernel headers
2.6.38. It has support for the following variants:
- SH4A, glibc, little endian
Default.
- SH4A, glibc, big endian
Add -mb to BR2_TARGET_OPTIMIZATION
- SH4A, uClibc, little endian
Not usable in Buildroot yet.
- SH4A, uClibc, big endian
Not usable in Buildroot yet.
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103
bool "Sourcery CodeBench SH 2011.03"
depends on BR2_sh2a
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
select BR2_LARGEFILE
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_USE_WCHAR
select BR2_TOOLCHAIN_HAS_THREADS
select BR2_TOOLCHAIN_HAS_THREADS_DEBUG
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Sourcery CodeBench toolchain for the SuperH architecture,
from Mentor Graphics. It uses gcc 4.5.2, binutils 2.20,
uClibc 0.9.30, gdb 7.2.50 and kernel headers 2.6.38. It has
support for the following variants:
- SH2A, uClibc, big endian
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009
bool "Sourcery CodeBench SH 2010.09"
depends on BR2_sh2a
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
select BR2_LARGEFILE
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_USE_WCHAR
select BR2_TOOLCHAIN_HAS_THREADS
select BR2_TOOLCHAIN_HAS_THREADS_DEBUG
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Sourcery CodeBench toolchain for the SuperH architecture,
from Mentor Graphics. It uses gcc 4.5.1, binutils 2.20,
uClibc 0.9.30, gdb 7.2.50 and kernel headers 2.6.35.2. It
has support for the following variants:
- SH2A, uClibc, big endian
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201209
bool "Sourcery CodeBench x86/x86_64 2012.09"
depends on BR2_i386 || BR2_x86_64
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_PREFER_STATIC_LIB
depends on !BR2_x86_jaguar
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Sourcery CodeBench toolchain for the x86/x86_64
architectures, from Mentor Graphics. It uses gcc 4.7.2,
binutils 2.23.51, glibc 2.16, gdb 7.4.50 and kernel headers
3.5.4. It has support for the following variants:
- Intel Pentium 4, glibc, 32 bits
Default for x86, nothing special to do.
- Intel Atom, glibc, 32 bits
Select an Atom core
- Intel Xeon, glibc, 64 bits
Default for x86_64, nothing special to do.
- Intel Core 2, glibc, 64 bits
Select a Core 2 core
Other architecture variants (beyond Pentium-4/Xeon) are
supported as well, but glibc is not optimised for it.
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201203
bool "Sourcery CodeBench x86/x86_64 2012.03"
depends on BR2_i386 || BR2_x86_64
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_PREFER_STATIC_LIB
depends on !BR2_x86_jaguar
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Sourcery CodeBench toolchain for the x86/x86_64
architectures, from Mentor Graphics. It uses gcc 4.6.3,
binutils 2.21.53, glibc 2.15, gdb 7.2.50 and kernel headers
3.2.10. It has support for the following variants:
- Intel Pentium 4, glibc, 32 bits
Default for x86, nothing special to do.
- Intel Atom, glibc, 32 bits
Select an Atom core
- Intel Xeon, glibc, 64 bits
Default for x86_64, nothing special to do.
- Intel Core 2, glibc, 64 bits
Select a Core 2 core
Other architecture variants (beyond Pentium-4/Xeon) are
supported as well, but glibc is not optimised for it.
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201109
bool "Sourcery CodeBench x86/x86_64 2011.09"
depends on BR2_i386 || BR2_x86_64
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_PREFER_STATIC_LIB
depends on !BR2_x86_jaguar
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Sourcery CodeBench toolchain for the x86/x86_64
architectures, from Mentor Graphics. It uses gcc 4.6.1,
binutils 2.21.53, glibc 2.13, gdb 7.2.50 and kernel headers
3.0.1. It has support for the following variants:
- Intel Pentium 4, glibc, 32 bits
Default for x86, nothing special to do.
- Intel Atom, glibc, 32 bits
Select an Atom core
- Intel Xeon, glibc, 64 bits
Default for x86_64, nothing special to do.
- Intel Core 2, glibc, 64 bits
Select a Core 2 core
Other architecture variants (beyond Pentium-4/Xeon) are
supported as well, but glibc is not optimised for it.
config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1
bool "Blackfin.uclinux.org 2013R1"
depends on BR2_bfin
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
select BR2_INSTALL_LIBSTDCPP
select BR2_LARGEFILE
select BR2_INET_IPV6
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_USE_WCHAR
select BR2_TOOLCHAIN_HAS_THREADS
select BR2_TOOLCHAIN_HAS_THREADS_DEBUG
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Toolchain for the Blackfin architecture, from
http://blackfin.uclinux.org.
config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2
bool "Blackfin.uclinux.org 2012R2-RC2"
depends on BR2_bfin
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
select BR2_INSTALL_LIBSTDCPP
select BR2_LARGEFILE
select BR2_INET_IPV6
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_USE_WCHAR
select BR2_TOOLCHAIN_HAS_THREADS
select BR2_TOOLCHAIN_HAS_THREADS_DEBUG
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Toolchain for the Blackfin architecture, from
http://blackfin.uclinux.org.
config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1
bool "Blackfin.uclinux.org 2012R1-RC2"
depends on BR2_bfin
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
select BR2_INSTALL_LIBSTDCPP
select BR2_LARGEFILE
select BR2_INET_IPV6
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_USE_WCHAR
select BR2_TOOLCHAIN_HAS_THREADS
select BR2_TOOLCHAIN_HAS_THREADS_DEBUG
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Toolchain for the Blackfin architecture, from
http://blackfin.uclinux.org.
config BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_14_3
bool "Xilinx Little Endian Microblaze GNU Tools 14.3"
depends on BR2_microblazeel
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_PREFER_STATIC_LIB
depends on BR2_DEPRECATED_SINCE_2014_02
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Toolchain for the Microblaze architecture, from
http://git.xilinx.com/?p=microblaze-gnu.git;a=tree;f=binaries. It
uses gcc 4.6.2, binutils 2.21.53, glibc 2.14 and gdb 7.4.50.
config BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_V2
bool "Xilinx Little Endian Microblaze GNU Tools v2"
depends on BR2_microblazeel
depends on BR2_HOSTARCH = "x86_64"
depends on !BR2_PREFER_STATIC_LIB
depends on BR2_DEPRECATED_SINCE_2014_02
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
help
Toolchain for the Microblaze architecture, from
http://wiki.xilinx.com/mb-gnu-tools
config BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_14_3
bool "Xilinx Big Endian Microblaze GNU Tools"
depends on BR2_microblazebe
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_PREFER_STATIC_LIB
depends on BR2_DEPRECATED_SINCE_2014_02
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_HOSTARCH_NEEDS_IA32_LIBS
help
Toolchain for the Microblaze architecture, from
http://git.xilinx.com/?p=microblaze-gnu.git;a=tree;f=binaries. It
uses gcc 4.6.2, binutils 2.21.53, glibc 2.14 and gdb 7.4.50.
config BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2
bool "Xilinx Big Endian Microblaze GNU Tools"
depends on BR2_microblazebe
depends on BR2_HOSTARCH = "x86_64"
depends on !BR2_PREFER_STATIC_LIB
depends on BR2_DEPRECATED_SINCE_2014_02
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
help
Toolchain for the Microblaze architecture, from
http://wiki.xilinx.com/mb-gnu-tools
config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_13_11
bool "Linaro AArch64 13.11"
depends on BR2_aarch64
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_PREFER_STATIC_LIB
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
help
Toolchain for the AArch64 architecture, from
http://www.linaro.org/engineering/armv8/
config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_13_10
bool "Linaro AArch64 13.10"
depends on BR2_aarch64
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_PREFER_STATIC_LIB
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
help
Toolchain for the AArch64 architecture, from
http://www.linaro.org/engineering/armv8/
config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_13_09
bool "Linaro AArch64 13.09"
depends on BR2_aarch64
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_PREFER_STATIC_LIB
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
help
Toolchain for the AArch64 architecture, from
http://www.linaro.org/engineering/armv8/
config BR2_TOOLCHAIN_EXTERNAL_CUSTOM
bool "Custom toolchain"
help
Use this option to use a custom toolchain pre-installed on
your system.
endchoice
choice
prompt "Toolchain origin"
# Keep compatibility with old defconfig files that are using
# custom toolchains, and which are therefore assuming that
# "preinstalled" in the default choice.
default BR2_TOOLCHAIN_EXTERNAL_PREINSTALLED if BR2_TOOLCHAIN_EXTERNAL_CUSTOM
config BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD
bool "Toolchain to be downloaded and installed"
help
Select this option if you want Buildroot to download and install the
toolchain. If you have selected a custom toolchain, specify the URL
in BR2_TOOLCHAIN_EXTERNAL_URL.
config BR2_TOOLCHAIN_EXTERNAL_PREINSTALLED
bool "Pre-installed toolchain"
help
Select this option if you want to use a pre-installed toolchain.
Specify the path to this toolchain in BR2_TOOLCHAIN_EXTERNAL_PATH.
endchoice
config BR2_TOOLCHAIN_EXTERNAL_PATH
string "Toolchain path"
default "/path/to/toolchain/usr"
depends on BR2_TOOLCHAIN_EXTERNAL_PREINSTALLED
help
Path to where the external toolchain is installed.
config BR2_TOOLCHAIN_EXTERNAL_URL
string "Toolchain URL"
depends on BR2_TOOLCHAIN_EXTERNAL_CUSTOM && BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD
help
URL of the custom toolchain tarball to download and install.
config BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX
string "Toolchain prefix"
depends on BR2_TOOLCHAIN_EXTERNAL_CUSTOM
default "$(ARCH)-linux"
config BR2_TOOLCHAIN_EXTERNAL_PREFIX
string
default "arm-linux-gnueabihf" if BR2_TOOLCHAIN_EXTERNAL_LINARO_2013_11
default "arm-linux-gnueabihf" if BR2_TOOLCHAIN_EXTERNAL_LINARO_2013_10
default "arm-linux-gnueabihf" if BR2_TOOLCHAIN_EXTERNAL_LINARO_2013_09
default "arm-none-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201203
default "arm-none-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201305
default "arm-none-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201311
default "arm-arago-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV7A_201109
default "arm-arago-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV5TE_201109
default "aarch64-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_13_11
default "aarch64-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_13_10
default "aarch64-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_13_09
default "microblazeel-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_14_3
default "microblazeel-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_V2
default "microblaze-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_14_3
default "microblaze-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2
default "mips-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201209
default "mips-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305
default "mips-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311
default "nios2-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305
default "powerpc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009
default "powerpc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103
default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103
default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201203
default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201209
default "sh-uclinux" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009
default "sh-uclinux" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103
default "i686-pc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201109
default "i686-pc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201203
default "i686-pc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201209
default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1 && BR2_BINFMT_FLAT
default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1 && BR2_BINFMT_FDPIC
default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 && BR2_BINFMT_FLAT
default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 && BR2_BINFMT_FDPIC
default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1 && BR2_BINFMT_FLAT
default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1 && BR2_BINFMT_FDPIC
default BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX \
if BR2_TOOLCHAIN_EXTERNAL_CUSTOM
config BR2_TOOLCHAIN_EXTERNAL_GLIBC
bool
select BR2_TOOLCHAIN_USES_GLIBC
config BR2_TOOLCHAIN_EXTERNAL_UCLIBC
bool
select BR2_TOOLCHAIN_USES_UCLIBC
config BR2_TOOLCHAIN_EXTERNAL_MUSL
bool
select BR2_TOOLCHAIN_USES_MUSL
if BR2_TOOLCHAIN_EXTERNAL_CUSTOM
choice
prompt "External toolchain C library"
default BR2_TOOLCHAIN_EXTERNAL_CUSTOM_UCLIBC
config BR2_TOOLCHAIN_EXTERNAL_CUSTOM_UCLIBC
bool "uClibc"
select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
# For the time being, we assume that all custom external
# toolchains have shadow password support.
select BR2_TOOLCHAIN_HAS_SHADOW_PASSWORDS
help
Select this option if your external toolchain uses the
uClibc C library (available from http://www.uclibc.org/).
config BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC
bool "glibc/eglibc"
depends on !BR2_PREFER_STATIC_LIB
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
help
Select this option if your external toolchain uses the GNU C
library (available from https://www.gnu.org/software/libc/)
or its variant the eglibc library (http://www.eglibc.org/).
Note: eglibc is a variant of glibc that (among other things)
can be configured to exclude some of its features. Using a
toolchain with eglibc configured to exclude key features may
cause build failures to some packages.
comment "(e)glibc only available with shared lib support"
depends on BR2_PREFER_STATIC_LIB
config BR2_TOOLCHAIN_EXTERNAL_CUSTOM_MUSL
bool "musl"
select BR2_TOOLCHAIN_EXTERNAL_MUSL
help
Select this option if your external toolchain uses the
'musl' C library, available from http://www.musl-libc.org/.
endchoice
if BR2_TOOLCHAIN_EXTERNAL_CUSTOM_UCLIBC
config BR2_TOOLCHAIN_EXTERNAL_LARGEFILE
bool "Toolchain has large file support?"
select BR2_LARGEFILE
help
Select this option if your external toolchain supports
largefile. If you don't know, leave the default value,
Buildroot will tell you if it's correct or not.
config BR2_TOOLCHAIN_EXTERNAL_INET_IPV6
bool "Toolchain has IPv6 support?"
select BR2_INET_IPV6
help
Select this option if your external toolchain supports
IPv6. If you don't know, leave the default value, Buildroot
will tell you if it's correct or not.
config BR2_TOOLCHAIN_EXTERNAL_WCHAR
bool "Toolchain has WCHAR support?"
select BR2_USE_WCHAR
help
Select this option if your external toolchain supports
WCHAR. If you don't know, leave the default value, Buildroot
will tell you if it's correct or not.
config BR2_TOOLCHAIN_EXTERNAL_LOCALE
bool "Toolchain has locale support?"
select BR2_TOOLCHAIN_EXTERNAL_WCHAR
select BR2_ENABLE_LOCALE
help
Select this option if your external toolchain has locale
support. If you don't know, leave the default value,
Buildroot will tell you if it's correct or not.
config BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS
bool "Toolchain has threads support?"
select BR2_TOOLCHAIN_HAS_THREADS
default y
help
Select this option if your external toolchain has thread
support. If you don't know, leave the default value,
Buildroot will tell you if it's correct or not.
config BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS_DEBUG
bool "Toolchain has threads debugging support?"
depends on BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS
select BR2_TOOLCHAIN_HAS_THREADS_DEBUG
default y
help
Select this option if your external toolchain has thread
debugging support. If you don't know, leave the default
value, Buildroot will tell you if it's correct or not.
config BR2_TOOLCHAIN_EXTERNAL_HAS_SSP
bool "Toolchain has SSP support?"
select BR2_TOOLCHAIN_HAS_SSP
help
Selection this option if your external toolchain has Stack
Smashing Protection support enabled. If you don't know,
leave the default value, Buildroot will tell you if it's
correct or not.
endif # BR2_TOOLCHAIN_EXTERNAL_CUSTOM_UCLIBC
config BR2_TOOLCHAIN_EXTERNAL_INET_RPC
bool "Toolchain has RPC support?"
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
depends on !BR2_TOOLCHAIN_EXTERNAL_MUSL
default y if BR2_TOOLCHAIN_EXTERNAL_GLIBC
help
Select this option if your external toolchain supports
RPC. If you don't know, leave the default value, Buildroot
will tell you if it's correct or not.
config BR2_TOOLCHAIN_EXTERNAL_CXX
bool "Toolchain has C++ support?"
select BR2_INSTALL_LIBSTDCPP
help
Select this option if your external toolchain has C++
support. If you don't know, leave the default value,
Buildroot will tell you if it's correct or not.
config BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS
string "Extra toolchain libraries to be copied to target"
help
If your external toolchain provides extra libraries that
need to be copied to the target filesystem, enter them
here, separated by spaces. They will be copied to the
target's /lib directory.
endif # BR2_TOOLCHAIN_EXTERNAL_CUSTOM
config BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY
bool "Copy gdb server to the Target"
depends on BR2_TOOLCHAIN_EXTERNAL
help
Copy the gdbserver provided by the external toolchain to the
target.
# When the FDPIC shared binary format is used, the corresponding libraries are
# always installed. When a different binary format is used, we offer the option
# of installing the FDPIC shared libraries.
config BR2_BFIN_INSTALL_FDPIC_SHARED
bool "Install FDPIC shared libraries"
depends on BR2_bfin && !BR2_BINFMT_FDPIC
help
The Linux kernel supports running both FDPIC and FLAT applications
concurrently if the binary format specific libraries are installed
properly. This option allows developer to install FDPIC libraries
into a buildroot rootfs image built with binary format that is not
FDPIC.
# When the FLAT shared binary format is used, we force the installation
# of the corresponding libraries. When a different binary format is
# used, we offer the option of installing the FLAT shared libraries.
config BR2_BFIN_INSTALL_FLAT_SHARED
bool "Install FLAT shared libraries" if !BR2_BINFMT_FLAT_SHARED
depends on BR2_bfin
default y if BR2_BINFMT_FLAT_SHARED
help
The Linux kernel supports running both FDPIC and FLAT applications
concurrently if the binary format specific libraries are installed
properly. This option allows developer to install FLAT libraries
into a buildroot rootfs image built with binary format that is not
shared FLAT.
endif # BR2_TOOLCHAIN_EXTERNAL
Reference in New Issue View Git Blame Copy Permalink