NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
a85971a68b
kumquat-buildroot/linux/linux.mk
Mike Frysinger 871db074b1 initial support for Blackfin processors 
[Peter: don't allow MMU on bfin]
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2011-02-07 14:29:19 +01:00

202 lines
7.7 KiB
Makefile
Raw Blame History

###############################################################################
#
# Linux kernel 2.6 target
#
###############################################################################
LINUX26_VERSION=$(call qstrip,$(BR2_LINUX_KERNEL_VERSION))
# Compute LINUX26_SOURCE and LINUX26_SITE from the configuration
ifeq ($(LINUX26_VERSION),custom)
LINUX26_TARBALL:=$(call qstrip,$(BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION))
LINUX26_SITE:=$(dir $(LINUX26_TARBALL))
LINUX26_SOURCE:=$(notdir $(LINUX26_TARBALL))
else
LINUX26_SOURCE:=linux-$(LINUX26_VERSION).tar.bz2
LINUX26_SITE:=$(BR2_KERNEL_MIRROR)/linux/kernel/v2.6/
endif
LINUX26_DIR:=$(BUILD_DIR)/linux-$(LINUX26_VERSION)
LINUX26_PATCH=$(call qstrip,$(BR2_LINUX_KERNEL_PATCH))
LINUX26_MAKE_FLAGS = \
HOSTCC="$(HOSTCC)" \
HOSTCFLAGS="$(HOSTCFLAGS)" \
ARCH=$(KERNEL_ARCH) \
INSTALL_MOD_PATH=$(TARGET_DIR) \
CROSS_COMPILE="$(CCACHE) $(TARGET_CROSS)" \
LZMA="$(LZMA)"
# Get the real Linux version, which tells us where kernel modules are
# going to be installed in the target filesystem.
LINUX26_VERSION_PROBED = $(shell $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) --no-print-directory -s kernelrelease)
ifeq ($(BR2_LINUX_KERNEL_UIMAGE),y)
ifeq ($(KERNEL_ARCH),blackfin)
# a uImage, but with a different file name
LINUX26_IMAGE_NAME=vmImage
else
LINUX26_IMAGE_NAME=uImage
endif
LINUX26_DEPENDENCIES+=$(MKIMAGE)
else ifeq ($(BR2_LINUX_KERNEL_BZIMAGE),y)
LINUX26_IMAGE_NAME=bzImage
else ifeq ($(BR2_LINUX_KERNEL_ZIMAGE),y)
LINUX26_IMAGE_NAME=zImage
else ifeq ($(BR2_LINUX_KERNEL_VMLINUX_BIN),y)
LINUX26_IMAGE_NAME=vmlinux.bin
else ifeq ($(BR2_LINUX_KERNEL_VMLINUX),y)
LINUX26_IMAGE_NAME=vmlinux
endif
# Compute the arch path, since i386 and x86_64 are in arch/x86 and not
# in arch/$(KERNEL_ARCH). Even if the kernel creates symbolic links
# for bzImage, arch/i386 and arch/x86_64 do not exist when copying the
# defconfig file.
ifeq ($(KERNEL_ARCH),i386)
KERNEL_ARCH_PATH=$(LINUX26_DIR)/arch/x86
else ifeq ($(KERNEL_ARCH),x86_64)
KERNEL_ARCH_PATH=$(LINUX26_DIR)/arch/x86
else
KERNEL_ARCH_PATH=$(LINUX26_DIR)/arch/$(KERNEL_ARCH)
endif
ifeq ($(BR2_LINUX_KERNEL_VMLINUX),y)
LINUX26_IMAGE_PATH=$(LINUX26_DIR)/$(LINUX26_IMAGE_NAME)
else
ifeq ($(KERNEL_ARCH),avr32)
LINUX26_IMAGE_PATH=$(KERNEL_ARCH_PATH)/boot/images/$(LINUX26_IMAGE_NAME)
else
LINUX26_IMAGE_PATH=$(KERNEL_ARCH_PATH)/boot/$(LINUX26_IMAGE_NAME)
endif
endif # BR2_LINUX_KERNEL_VMLINUX
# Download
$(LINUX26_DIR)/.stamp_downloaded:
@$(call MESSAGE,"Downloading kernel")
$(call DOWNLOAD,$(LINUX26_SITE),$(LINUX26_SOURCE))
$(foreach patch,$(filter ftp://% http://%,$(LINUX26_PATCH)),\
$(call DOWNLOAD,$(dir $(patch)),$(notdir $(patch)))$(sep))
mkdir -p $(@D)
touch $@
# Extraction
$(LINUX26_DIR)/.stamp_extracted: $(LINUX26_DIR)/.stamp_downloaded
@$(call MESSAGE,"Extracting kernel")
mkdir -p $(@D)
$(Q)$(INFLATE$(suffix $(LINUX26_SOURCE))) $(DL_DIR)/$(LINUX26_SOURCE) | \
tar -C $(@D) $(TAR_STRIP_COMPONENTS)=1 $(TAR_OPTIONS) -
$(Q)touch $@
# Patch
$(LINUX26_DIR)/.stamp_patched: $(LINUX26_DIR)/.stamp_extracted
@$(call MESSAGE,"Patching kernel")
for p in $(LINUX26_PATCH) ; do \
if echo $$p | grep -q -E "^ftp://|^http://" ; then \
toolchain/patch-kernel.sh $(@D) $(DL_DIR) `basename $$p` ; \
elif test -d $$p ; then \
toolchain/patch-kernel.sh $(@D) $$p linux-\*.patch ; \
else \
toolchain/patch-kernel.sh $(@D) `dirname $$p` `basename $$p` ; \
fi \
done
$(Q)touch $@
# Configuration
$(LINUX26_DIR)/.stamp_configured: $(LINUX26_DIR)/.stamp_patched
@$(call MESSAGE,"Configuring kernel")
ifeq ($(BR2_LINUX_KERNEL_USE_DEFCONFIG),y)
$(TARGET_MAKE_ENV) $(MAKE1) $(LINUX26_MAKE_FLAGS) -C $(@D) $(call qstrip,$(BR2_LINUX_KERNEL_DEFCONFIG))_defconfig
else ifeq ($(BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG),y)
cp $(BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE) $(KERNEL_ARCH_PATH)/configs/buildroot_defconfig
$(TARGET_MAKE_ENV) $(MAKE1) $(LINUX26_MAKE_FLAGS) -C $(@D) buildroot_defconfig
rm $(KERNEL_ARCH_PATH)/configs/buildroot_defconfig
endif
ifeq ($(BR2_ARM_EABI),y)
$(call KCONFIG_ENABLE_OPT,CONFIG_AEABI,$(@D)/.config)
else
$(call KCONFIG_DISABLE_OPT,CONFIG_AEABI,$(@D)/.config)
endif
ifeq ($(BR2_TARGET_ROOTFS_INITRAMFS),y)
# As the kernel gets compiled before root filesystems are
# built, we create a fake initramfs file list. It'll be
# replaced later by the real list, and the kernel will be
# rebuilt using the linux26-rebuild-with-initramfs target.
touch $(BINARIES_DIR)/rootfs.initramfs
$(call KCONFIG_ENABLE_OPT,CONFIG_BLK_DEV_INITRD,$(@D)/.config)
$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_SOURCE,\"$(BINARIES_DIR)/rootfs.initramfs\",$(@D)/.config)
$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_ROOT_UID,0,$(@D)/.config)
$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_ROOT_GID,0,$(@D)/.config)
$(call KCONFIG_DISABLE_OPT,CONFIG_INITRAMFS_COMPRESSION_NONE,$(@D)/.config)
$(call KCONFIG_ENABLE_OPT,CONFIG_INITRAMFS_COMPRESSION_GZIP,$(@D)/.config)
endif
$(TARGET_MAKE_ENV) $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(@D) oldconfig
$(Q)touch $@
# Compilation. We make sure the kernel gets rebuilt when the
# configuration has changed.
$(LINUX26_DIR)/.stamp_compiled: $(LINUX26_DIR)/.stamp_configured $(LINUX26_DIR)/.config
@$(call MESSAGE,"Compiling kernel")
$(TARGET_MAKE_ENV) $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(@D) $(LINUX26_IMAGE_NAME)
@if [ $(shell grep -c "CONFIG_MODULES=y" $(LINUX26_DIR)/.config) != 0 ] ; then \
$(TARGET_MAKE_ENV) $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(@D) modules ; \
fi
$(Q)touch $@
# Installation
$(LINUX26_DIR)/.stamp_installed: $(LINUX26_DIR)/.stamp_compiled
@$(call MESSAGE,"Installing kernel")
cp $(LINUX26_IMAGE_PATH) $(BINARIES_DIR)
# Install modules and remove symbolic links pointing to build
# directories, not relevant on the target
@if [ $(shell grep -c "CONFIG_MODULES=y" $(LINUX26_DIR)/.config) != 0 ] ; then \
$(TARGET_MAKE_ENV) $(MAKE1) $(LINUX26_MAKE_FLAGS) -C $(@D) \
DEPMOD="$(HOST_DIR)/usr/sbin/depmod" modules_install ; \
rm -f $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION_PROBED)/build ; \
rm -f $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION_PROBED)/source ; \
fi
$(Q)touch $@
linux linux26: host-module-init-tools $(LINUX26_DEPENDENCIES) $(LINUX26_DIR)/.stamp_installed
linux-menuconfig linux-xconfig linux-gconfig linux-nconfig linux26-menuconfig linux26-xconfig linux26-gconfig linux26-nconfig: dirs $(LINUX26_DIR)/.stamp_configured
$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) \
$(subst linux-,,$(subst linux26-,,$@))
# Support for rebuilding the kernel after the initramfs file list has
# been generated in $(BINARIES_DIR)/rootfs.initramfs.
$(LINUX26_DIR)/.stamp_initramfs_rebuilt: $(LINUX26_DIR)/.stamp_installed $(BINARIES_DIR)/rootfs.initramfs
@$(call MESSAGE,"Rebuilding kernel with initramfs")
# Remove the previously generated initramfs which was empty,
# to make sure the kernel will actually regenerate it.
$(RM) -f $(@D)/usr/initramfs_data.cpio*
# Build the kernel.
$(TARGET_MAKE_ENV) $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(@D) $(LINUX26_IMAGE_NAME)
# Copy the kernel image to its final destination
cp $(LINUX26_IMAGE_PATH) $(BINARIES_DIR)
$(Q)touch $@
# The initramfs building code must make sure this target gets called
# after it generated the initramfs list of files.
linux-rebuild-with-initramfs linux26-rebuild-with-initramfs: $(LINUX26_DIR)/.stamp_initramfs_rebuilt
ifeq ($(BR2_LINUX_KERNEL),y)
TARGETS+=linux26
endif
# Checks to give errors that the user can understand
ifeq ($(filter source,$(MAKECMDGOALS)),)
ifeq ($(BR2_LINUX_KERNEL_USE_DEFCONFIG),y)
ifeq ($(call qstrip,$(BR2_LINUX_KERNEL_DEFCONFIG)),)
$(error No kernel defconfig name specified, check your BR2_LINUX_KERNEL_DEFCONFIG setting)
endif
endif
ifeq ($(BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG),y)
ifeq ($(call qstrip,$(BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE)),)
$(error No kernel configuration file specified, check your BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE setting)
endif
endif
endif
Reference in New Issue View Git Blame Copy Permalink