kumquat-buildroot/board/freescale/imx25pdk
Georges Savoundararadj f645f914ac board/freescale: factorize genimage logic
For the boards imx6ulevk, imx6sabresd, mx25pdk, mx51evk, mx53loco,
warpboard:
* Replace genimage.cfg with a common Freescale genimage template named
  genimage.cfg.template because they all use the same layout.  The only
  difference comes from the device tree blobs.
* Replace each post-image.sh script with a generic post-image.sh script
  which is able to generate the right genimage.cfg depending on:
** the image type (zImage or uImage) from BR2_LINUX_KERNEL_UIMAGE
** the device tree blobs from BR2_LINUX_KERNEL_INTREE_DTS_NAME
** the rootfs type (ext2, ext3 or ext4) from BR2_TARGET_ROOTFS_EXT2
* Fix the readme.txt files accordingly

Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
[Thomas: remove handling of rootfs type, using rootfs.ext2 in all cases
is fine, rootfs.ext3 and rootfs.ext4 are just symbolic links to it.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-09-11 23:24:04 +02:00
..
readme.txt board/freescale: factorize genimage logic 2016-09-11 23:24:04 +02:00

**************************
Freescale i.MX25 PDK board
**************************

This file documents the Buildroot support for the Freescale i.MX25 PDK board.

Build
=====

First, configure Buildroot for the i.MX25 PDK board:

  make mx25pdk_defconfig

Build all components:

  make

You will find in output/images/ the following files:
  - imx25-pdk.dtb
  - rootfs.ext4
  - rootfs.tar
  - sdcard.img
  - u-boot.imx
  - zImage

Create a bootable SD card
=========================

To determine the device associated to the SD card have a look in the
/proc/partitions file:

  cat /proc/partitions

Buildroot prepares a bootable "sdcard.img" image in the output/images/
directory, ready to be dumped on a SD card. Launch the following
command as root:

  dd if=output/images/sdcard.img of=/dev/<your-sd-device>

*** WARNING! This will destroy all the card content. Use with care! ***

For details about the medium image layout, see the definition in
board/freescale/common/genimage.cfg.template.

Boot the i.MX25 PDK board
=========================

To boot your newly created system:
- insert the SD card in the SD slot of the board;
- put a USB cable into the Debug USB Port and connect using a terminal
  emulator at 115200 bps, 8n1;
- power on the board.

Enjoy!