|
…
|
||
|---|---|---|
| .. | ||
| overlay/boot/extlinux | ||
| genimage.cfg | ||
| linux.config | ||
| readme.txt | ||
| uboot-fragment.config | ||
STM32MP157 Discovery Kit
Intro
=====
This configuration supports the STM32MP157 Discovery Kit 2 (DK2)
platform:
https://www.st.com/en/evaluation-tools/stm32mp157c-dk2.html
How to build
============
$ make stm32mp157_dk_defconfig
$ make
How to write the microSD card
=============================
Once the build process is finished you will have an image called
"sdcard.img" in the output/images/ directory.
Copy the bootable "sdcard.img" onto an microSD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
Boot the board
==============
(1) Insert the microSD card in connector CN15
(2) Plug a micro-USB cable in connector CN11 and run your serial
communication program on /dev/ttyACM0.
(3) Plug a USB-C cable in CN6 to power-up the board.
(4) The system will start, with the console on UART, but also visible
on the screen.