5debaf1beb
This package contains the Freescale manufacturing tool. It is designed to program firmware to i.MX boards during production. The communication is done over USB using the Freescale UTP protocol. The project is maintained on NXPMicro Github repository: https://github.com/NXPmicro/mfgtools Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> [Thomas: - remove dependency on host-cmake, this is handled by the host-cmake-package infrastructure - add quotes around $(HOSTCXX) - add CPOL.htm to <pkg>_LICENSE_FILES. - tweaks to the readme.txt file.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
70 lines
2.2 KiB
Plaintext
70 lines
2.2 KiB
Plaintext
MfgTools Howto
|
|
==============
|
|
|
|
1. Build your mfgtool image
|
|
|
|
Make sure to enable the following Buildroot options:
|
|
|
|
BR2_PACKAGE_FREESCALE_IMX=y
|
|
BR2_PACKAGE_IMX_UUC=y
|
|
BR2_TARGET_ROOTFS_CPIO=y
|
|
BR2_TARGET_ROOTFS_CPIO_GZIP=y
|
|
BR2_TARGET_ROOTFS_CPIO_UIMAGE=y
|
|
|
|
Also modify your kernel configuration to have:
|
|
|
|
CONFIG_USB_GADGET=y
|
|
CONFIG_USB_MASS_STORAGE=y
|
|
CONFIG_FSL_UTP=y
|
|
CONFIG_MMC_BLOCK_MINORS=16
|
|
|
|
2. Go into the output and create the necessary folders
|
|
|
|
$ cd output
|
|
$ mkdir -p "Profiles/Linux/OS Firmware/firmware"
|
|
|
|
3. Create your XML update script named ucl2.xml
|
|
|
|
You can find a sample XML at:
|
|
|
|
$ wget https://storage.googleapis.com/boundarydevices.com/ucl2.xml \
|
|
-O Profiles/Linux/OS\ Firmware/ucl2.xml
|
|
|
|
4. Copy the U-Boot, Kernel and initramfs images to the appropriate
|
|
folder
|
|
|
|
$ cp images/u-boot.imx images/zImage images/imx6q-sabrelite.dtb \
|
|
images/rootfs.cpio.uboot Profiles/Linux/OS\ Firmware/firmware/
|
|
|
|
5. Copy the prebuilt binaries to be flashed
|
|
|
|
Depending on your ucl2.xml file, the sample doesn't flash anything.
|
|
|
|
6. Run the MfgTools client:
|
|
|
|
$ ./host/usr/bin/mfgtoolcli -l mmc -s uboot_defconfig=imx \
|
|
-s dtbname=imx6q-sabrelite.dtb -s initramfs=rootfs.cpio.uboot \
|
|
-s mmc=1 -p 1
|
|
|
|
For more information about the tools options, please read the
|
|
"Manufacturing Tool V2 Quick Start Guide.docx" documentation contained
|
|
in every mfgtools package from NXP website[1].
|
|
|
|
Note: All the above commands require your Linux host user to have
|
|
permissions to access the USB devices. Please make sure to have udev
|
|
rules that allow the user to communicate with the BootROM IDs
|
|
(Freescale USB recovery) as well as the one used for the UTP Linux
|
|
image (0x066F:0x37FF). Using 'sudo' in front of the mfgtoolcli
|
|
command would also grant you the necessary permission but it is *not*
|
|
recommended.
|
|
|
|
Also, if your U-Boot environment doesn't include mfgtools bootargs,
|
|
make sure to set the following:
|
|
|
|
setenv bootargs "console=${console},${baudrate} g_mass_storage.stall=0 \
|
|
g_mass_storage.removable=1 g_mass_storage.idVendor=0x066F \
|
|
g_mass_storage.idProduct=0x37FF g_mass_storage.iSerialNumber=\"\" \
|
|
g_mass_storage.file=/fat"
|
|
|
|
[1] http://www.nxp.com/products/software-and-tools/software-development-tools/i.mx-software-and-tools/i.mx-6-series-software-and-development-tool-resources:IMX6_SW
|