|
…
|
||
|---|---|---|
| .. | ||
| overlay/boot/extlinux | ||
| genimage.cfg | ||
| readme.txt | ||
Starfive VisionFive2 ==================== The VisionFive2 is a low-cost RISC-V 64-bit based platform, powered by a Starfive JH7110 processor. https://doc-en.rvspace.org/Doc_Center/visionfive_2.html How to build ============ $ make visionfive2_defconfig $ make How to write the SD card ======================== Once the build process is finished you will have an image called "sdcard.img" in the output/images/ directory. Copy the bootable "sdcard.img" onto an SD card with "dd": $ sudo dd if=output/images/sdcard.img of=/dev/sdX Preparing the board =================== Connect a TTL UART cable to pin 6 (GND), 8 (TX) and 10 (RX). Insert your SD card. Power-up the board using an USB-C cable.