5ac8f8ce10
Add support for the iMX6 based conga-QMX6 family of Qseven modules. This patch is based on Linux 3.0.35 from Congatec's kernel reporitory [Peter: slightly simplify post build script] Signed-off-by: Stephan Hoffmann <sho@relinux.de> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
37 lines
1.2 KiB
Plaintext
37 lines
1.2 KiB
Plaintext
This is the minimal buildroot support for the Congatec QMX6 Qseven CoM
|
|
|
|
conga-QMX6 is based on the freescale iMX6 SoC. For more information please
|
|
have a look at http://www.congatec.com/products/qseven/conga-qmx6.html
|
|
|
|
The configuration is based on the currently latest kernel release from
|
|
Congatec's git repository which is based on 3.0.35. The bootloader u-boot
|
|
is preconfigured on the CPU module and does not need to be replaced.
|
|
|
|
To build the default configuration you only have to:
|
|
|
|
make qmx6_defconfig && make
|
|
|
|
You will need a microSD card of sufficient size and the first or only
|
|
partition configured as Linux type.
|
|
|
|
To transfer the system to the card do:
|
|
|
|
$ sudo dd if=output/images/rootfs.ext2 of=/dev/sdX1
|
|
|
|
You can optionally extend the filesystem size to the whole partition:
|
|
|
|
$ sudo resize2fs /dev/sdX1
|
|
|
|
You can also update the card image without completely rewriting it:
|
|
|
|
$ sudo mount /dev/sdX1 /mnt
|
|
$ sudo tar xf output/images/rootfs.tar -C /mnt
|
|
$ sudo umount /mnt
|
|
|
|
Connect a terminal program to the rs232 connector marked "CONSOLE"
|
|
with baudrate set to 115200, insert the microSD card into the socket
|
|
on the CPU module and power the board to watch the system boot.
|
|
|
|
Booting from the SD card slot on the base board is currently not
|
|
supported.
|