|
…
|
||
|---|---|---|
| .. | ||
| extlinux.conf | ||
| genimage.cfg | ||
| post-build.sh | ||
| readme.txt | ||
RADXA ROCKPI-N10 ================ https://wiki.radxa.com/RockpiN10 Build: ====== $ make rock_pi_n10_defconfig $ make Files created in output directory ================================= output/images . ├── bl31.elf ├── boot.vfat ├── extlinux ├── idbloader.img ├── Image ├── rk3399pro-rock-pi-n10.dtb ├── rootfs.ext2 ├── rootfs.ext4 -> rootfs.ext2 ├── rootfs.tar ├── sdcard.img ├── u-boot.bin └── u-boot.itb Creating bootable SD card: ========================== Simply invoke (as root) sudo dd if=output/images/sdcard.img of=/dev/sdX && sync Where X is your SD card device. Booting: ======== Serial console: --------------- RockPi-N10 has a 40-pin GPIO header. The pin layout is as follows: pin 6: gnd pin 8: tx pin 10: rx Baudrate for this board is 1500000. The boot order on rockpi-n10 is emmc, sd. If emmc contains a valid Image, the board always boots from emmc. To boot from SD, erase emmc as per the guide: https://wiki.amarulasolutions.com/bsp/setup/rockchip/rk3399_emmc.html Login: ------ Enter 'root' as login user, and the prompt is ready. wiki link: ---------- https://wiki.amarulasolutions.com/bsp/rockchip/rk3399pro/rock-pi-n10.html